[Thu May 16 01:36:53 2013] Detection parameters:
  Position = (234.3, 229.0) = 5 29 29.36 -65 30 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 270.8 +/- 35.5
  Background counts = 437.2
  Rate = 0.01 +/- 0.001

[Thu May 16 01:36:58 2013] Off-axis axis estimate = 6.85'
[Thu May 16 01:49:56 2013] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Thu May 16 01:49:56 2013] Initial guess for spatial extent in simple fitting = 9.85"
[Thu May 16 01:49:56 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.981
[Thu May 16 01:49:56 2013] Giving source the simple spatial ID 77 for pass 0, mean size = 9.85"
[Thu May 16 23:44:00 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_src77.ximg exists
[Thu May 16 23:44:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_src77.csv
[Thu May 16 23:44:00 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_src77_1.ximg exists
[Thu May 16 23:44:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_src77.csv
[Thu May 16 23:44:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:44:03 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Thu May 16 23:44:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src77.csv
[Thu May 16 23:44:03 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Thu May 16 23:44:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src77.csv
[Thu May 16 23:44:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 09:07:44 2013] Warning, spatial fit 77 centroid is now closest to src. 74
[Fri May 17 09:07:45 2013] Vigneting correction estimate = 1.000000
[Fri May 17 09:07:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 09:07:45 2013] Assessing source extent using major
[Fri May 17 09:07:45 2013] Source does appear to be extended
[Fri May 17 09:07:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 09:07:45 2013] Source is confused with source 82
[Fri May 17 09:08:45 2013] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Fri May 17 09:08:45 2013] Initial guess for spatial extent in simple fitting = 9.85"
[Fri May 17 09:08:45 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.981
[Fri May 17 09:08:45 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 9.85"
[Fri May 17 19:59:57 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_src69.ximg exists
[Fri May 17 19:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_src69.csv
[Fri May 17 19:59:57 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_src69_1.ximg exists
[Fri May 17 19:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_src69.csv
[Fri May 17 19:59:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:00:00 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Fri May 17 20:00:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src69.csv
[Fri May 17 20:00:00 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Fri May 17 20:00:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src69.csv
[Fri May 17 20:00:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 04:24:55 2013] Source 83 is offset by 5.074883 and -0.188392 pixels which is larger than
2 X fitted extent = 1.136308 x 1.136308, not incorporating fit results
[Sat May 18 04:24:55 2013] Spatial fit model total counts = 6338.970000, observed total counts = 5655.000000
[Sat May 18 04:24:55 2013] Poor agreement between spatial fit and data for source 83
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 18 04:24:55 2013] Vigneting correction estimate = 1.000000
[Sat May 18 04:24:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 04:24:55 2013] Assessing source extent using major
[Sat May 18 04:24:55 2013] Source does appear to be extended
[Sat May 18 04:24:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 04:26:35 2013] XMMSAS src. selection expression = ellipse(20336.234818, 19876.951920, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 04:26:35 2013] Writing source region out to fullrun_pn_xmm0160362701_pi300-10000_pass1_cl_src83_src.reg
[Sat May 18 04:26:35 2013] Extracting stamp from image fullrun_pn_xmm0160362701_pi300-10000_cl_sm2.00.img.gz, (197, 192) - (272, 267)
[Sat May 18 04:26:35 2013] XMMSAS bgd. selection expression = annulus(20336.234818, 19876.951920, 1087.500000, 2175.000000, X, Y) && !ellipse(18594.077606, 16931.467728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20171.680084, 18746.757721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20097.830444, 17787.770432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19372.335724, 19851.012283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19400.323715, 17344.437622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18741.249863, 17567.385742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19570.864212, 22178.835770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21693.686249, 21242.527740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19358.611877, 21002.076340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18257.994705, 21105.529556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21908.990540, 20853.401337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20367.167236, 20725.472733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20830.584015, 20398.001419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19648.356552, 20477.478394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17395.444717, 20044.281158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18745.689072, 20456.523575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17935.680786, 20012.679672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20843.251160, 19780.847824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18310.657211, 19427.947968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19355.655502, 19359.352631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20562.253479, 19353.512894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18776.393158, 18973.899460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18665.720917, 18566.633896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18026.201355, 18908.885757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18484.609421, 18141.955322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21004.641098, 18132.150299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17778.250824, 17447.398331, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 04:26:35 2013] Writing fullrun_pn_xmm0160362701_pi300-10000_pass1_cl_src83.gif
[Sat May 18 06:58:39 2013] Mean detx,y = (7011.40, 54.74) 
[Sat May 18 06:58:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 06:59:07 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 06:59:07 2013] Setting source spectrum file to fullrun_pn_xmm0160362701_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Sat May 18 06:59:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0160362701_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Sat May 18 08:18:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 08:18:19 2013] rmf not generated due to insufficient counts