[Thu May 16 01:36:43 2013] Detection parameters:
  Position = (264.9, 110.0) = 5 29 8.07 -65 38 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 358.7 +/- 28.8
  Background counts = 79.4
  Rate = 0.009 +/- 0.0008

[Thu May 16 01:36:58 2013] Off-axis axis estimate = 13.88'
[Thu May 16 01:49:56 2013] Using EEF radius (= 13.37 ")to estimate initial spatial extent for simple fitting
[Thu May 16 01:49:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 16 01:49:56 2013] Initial guess for spatial extent in simple fitting = 13.37"
[Thu May 16 01:49:56 2013] source mask rpix=3.1, npix_max = 51, mask sum = 64, frac = 1.253
[Thu May 16 01:49:56 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.37"
[Thu May 16 23:43:58 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_src6.ximg exists
[Thu May 16 23:43:58 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May 16 23:43:58 2013] Fit fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu May 16 23:44:01 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May 16 23:44:01 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May 16 23:44:01 2013] Fit fullrun_pn_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri May 17 09:07:44 2013] Warning, spatial fit 6 centroid is now closest to src. 24
[Fri May 17 09:07:44 2013] Spatial fit model total counts = 3114.880000, observed total counts = 3119.000000
[Fri May 17 09:07:44 2013] Offset between fit and detection position for source 10 = 1.919693 pixels
[Fri May 17 09:07:44 2013] Warning, changing simple spatial fit ID from 6 to 28
[Fri May 17 09:07:44 2013] 3260.992000 total counts/ 2440.460000 bgd. counts: snr = 16.609619
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.919693 pixels
  Position = (263.1, 110.5) = 5 29 9.38 -65 38 51.7
  Extent = 26.9 (26.6-53.8)" x 17.7 (17.7-17.7)", rotation angle = 222 (222-222) degrees
  Source counts = 820.5 +/- 57.1
  Background counts = 2440.5
  Rate = 0.02 +/- 0.001
[Fri May 17 09:07:45 2013] Vigneting correction estimate = 1.000000
[Fri May 17 09:07:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 09:07:45 2013] Assessing source extent using major axis lower bound
[Fri May 17 09:07:45 2013] Source does appear to be extended
[Fri May 17 09:07:45 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.50
[Fri May 17 09:07:45 2013] Source is asymmetric
[Fri May 17 09:07:45 2013] Source is confused with source 11
[Fri May 17 09:07:45 2013] Source is confused with source 12
[Fri May 17 09:07:45 2013] Source is confused with source 23
[Fri May 17 09:07:45 2013] Source is confused with source 25
[Fri May 17 09:07:45 2013] Source is confused with source 33
[Fri May 17 09:07:45 2013] Source is confused with source 41
[Fri May 17 09:07:45 2013] Source is confused with source 42
[Fri May 17 09:07:45 2013] Source is confused with source 43
[Fri May 17 09:07:45 2013] Source is confused with source 130
[Fri May 17 09:08:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 09:08:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 09:08:45 2013] Initial guess for spatial extent in simple fitting = 22.27"
[Fri May 17 09:08:45 2013] source mask rpix=5.1, npix_max = 126, mask sum = 132, frac = 1.045
[Fri May 17 09:08:45 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 22.27"
[Fri May 17 19:59:56 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_src6.ximg exists
[Fri May 17 19:59:56 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri May 17 19:59:56 2013] Fit fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri May 17 19:59:58 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri May 17 19:59:58 2013] fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May 17 19:59:58 2013] Fit fullrun_pn_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat May 18 04:24:54 2013] Warning, spatial fit 6 centroid is now closest to src. 130
[Sat May 18 04:24:55 2013] Source 10 is offset by -1.652920 and 1.400253 pixels which is larger than
2 X fitted extent = 1.490989 x 10.688736, not incorporating fit results
[Sat May 18 04:24:55 2013] Spatial fit model total counts = 9749.750000, observed total counts = 9732.000000
[Sat May 18 04:24:55 2013] Offset between fit and detection position for source 10 = 1.960559 pixels
[Sat May 18 04:24:55 2013] Warning, changing simple spatial fit ID from 6 to 34
[Sat May 18 04:24:55 2013] 9430.450000 total counts/ 8082.260000 bgd. counts: snr = 14.996320
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.960559 pixels
  Position = (264.9, 109.7) = 5 29 8.12 -65 38 55.1
  Extent = 44.8 (43.2-89.5)" x 15.1 (13.7-16.3)", rotation angle = 212 (209-217) degrees
  Source counts = 1348.2 +/- 97.1
  Background counts = 8082.3
  Rate = 0.04 +/- 0.003
[Sat May 18 04:24:55 2013] Vigneting correction estimate = 1.000000
[Sat May 18 04:24:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 04:24:55 2013] Assessing source extent using major axis lower bound
[Sat May 18 04:24:55 2013] Source does appear to be extended
[Sat May 18 04:24:55 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.65
[Sat May 18 04:24:55 2013] Source is asymmetric
[Sat May 18 04:26:27 2013] Counts = 1348.190000, rescaling region sizes by 2.000000
[Sat May 18 04:26:27 2013] XMMSAS src. selection expression = ellipse(22995.192000, 9493.612000, 5370.228155, 1812.888052, 212.385000, X, Y)
[Sat May 18 04:26:27 2013] Writing source region out to fullrun_pn_xmm0160362701_pi300-10000_pass1_cl_src10_src.reg
[Sat May 18 04:26:27 2013] Extracting stamp from image fullrun_pn_xmm0160362701_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (574, 418)
[Sat May 18 04:26:27 2013] XMMSAS bgd. selection expression = annulus(22995.192000, 9493.612000, 17900.760515, 35801.521030, X, Y) && !ellipse(23566.758972, 12903.472336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18594.077606, 16931.467728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20171.680084, 18746.757721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20097.830444, 17787.770432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29052.997345, 41433.555603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19372.335724, 19851.012283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19400.323715, 17344.437622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23911.312744, 12376.005630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21258.824000, 10446.858000, 1400.768040, 1400.768040, 0.000000, X, Y) && !ellipse(22274.282000, 9741.294000, 2089.952060, 2089.952060, 0.000000, X, Y) && !ellipse(21770.758000, 10066.166000, 2129.072061, 1236.544036, 206.258000, X, Y) && !ellipse(23588.878021, 13307.347427, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(31885.286000, 41401.957520, 2121.200061, 2121.200061, 0.000000, X, Y) && !ellipse(30061.603149, 41449.615875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33429.576843, 41555.240906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32866.184937, 41746.010071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29835.994690, 40693.880371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30190.236664, 42135.433838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23198.576000, 9955.932000, 3903.792112, 2251.888065, 22.876500, X, Y) && !ellipse(24152.893860, 9431.270157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27266.109528, 42309.516144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30846.636902, 42050.600342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32001.971000, 41863.771000, 1467.704042, 1467.704042, 0.000000, X, Y) && !ellipse(34115.660309, 41308.124054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27224.685760, 41804.394165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33071.244000, 41042.620000, 2144.480062, 2144.480062, 0.000000, X, Y) && !ellipse(32185.714203, 41018.332916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23729.824000, 9275.906000, 1951.896056, 1951.896056, 0.000000, X, Y) && !ellipse(18741.249863, 17567.385742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20362.064000, 11741.960000, 1921.888055, 1921.888055, 0.000000, X, Y) && !ellipse(24694.790649, 11141.079819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21782.928000, 10919.188000, 4179.904120, 2331.896067, 0.000000, X, Y) && !ellipse(19669.978000, 11289.152000, 2079.064060, 2079.064060, 0.000000, X, Y) && !ellipse(23540.333466, 10392.915794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.635559, 10127.955818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22322.496000, 10067.653000, 2110.664061, 1469.488042, 242.854000, X, Y) && !ellipse(27932.017426, 42227.860718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29009.008820, 42280.278961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26710.754395, 42228.792633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34676.800751, 41078.150726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33561.367188, 41094.720764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30728.403137, 41193.745392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26667.384491, 40951.359802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28214.506000, 40689.152000, 2049.680059, 2049.680059, 0.000000, X, Y) && !ellipse(31757.155304, 40849.587219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33814.739288, 40673.003876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34769.195770, 40504.377655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32630.620117, 40769.535431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34472.002411, 40180.360535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27359.948600, 39896.102200, 1971.688057, 627.922418, 0.829449, X, Y) && !ellipse(25076.148800, 9090.924000, 1182.592034, 1182.592034, 0.000000, X, Y) && !ellipse(19570.864212, 22178.835770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21693.686249, 21242.527740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19358.611877, 21002.076340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18257.994705, 21105.529556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21908.990540, 20853.401337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20367.167236, 20725.472733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16956.571030, 20588.353745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20830.584015, 20398.001419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19648.356552, 20477.478394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17395.444717, 20044.281158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18745.689072, 20456.523575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17935.680786, 20012.679672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20843.251160, 19780.847824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20336.234818, 19876.951920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18310.657211, 19427.947968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19355.655502, 19359.352631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20562.253479, 19353.512894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18776.393158, 18973.899460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18665.720917, 18566.633896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18026.201355, 18908.885757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18484.609421, 18141.955322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17022.077240, 18399.815750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21004.641098, 18132.150299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17176.102127, 17373.450455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17778.250824, 17447.398331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19745.952774, 16699.580124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15339.686066, 15847.285187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25403.569305, 12382.383011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24826.894000, 12549.521600, 1931.424056, 1931.424056, 0.000000, X, Y) && !ellipse(27057.055176, 12478.534897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22729.968079, 12124.247787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18990.364624, 12372.648346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21432.856171, 11863.246460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26072.355255, 12044.769485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25073.650055, 11974.063400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22052.323624, 11862.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18218.908000, 12551.519600, 2042.624059, 1872.504054, 46.079600, X, Y) && !ellipse(26653.042023, 11612.597092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22482.041443, 11606.171921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21473.863098, 11513.972046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19097.374000, 11866.478000, 3915.128113, 1571.968045, 36.349300, X, Y) && !ellipse(24266.024658, 11596.117325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19676.416000, 11723.404000, 2060.488059, 2060.488059, 0.000000, X, Y) && !ellipse(23363.277527, 11434.710129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20954.398000, 10988.996000, 4120.976119, 4120.976119, 0.000000, X, Y) && !ellipse(23819.969116, 11435.356628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25894.773621, 11165.917618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19434.234000, 11621.188000, 2042.624059, 2042.624059, 0.000000, X, Y) && !ellipse(26806.869110, 11092.593674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27354.004272, 10924.188484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26045.592560, 10732.103088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26599.914886, 10462.385963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24946.198029, 10214.562210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25633.457672, 9360.159180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24132.027985, 8664.110725, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 04:26:27 2013] Writing fullrun_pn_xmm0160362701_pi300-10000_pass1_cl_src10.gif
[Sat May 18 04:43:37 2013] Mean detx,y = (9272.62, -9717.11) 
[Sat May 18 04:43:50 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 04:58:42 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 04:58:43 2013] Setting source spectrum file to fullrun_pn_xmm0160362701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat May 18 04:58:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0160362701_pi300-10000_pass1_cl_src10_bgd.pi.gz