[Thu May 16 01:37:17 2013] Detection parameters:
  Position = (225.7, 326.9) = 5 29 35.12 -65 23 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 388.2 +/- 33.0
  Background counts = 266.0
  Rate = 0.02 +/- 0.001

[Thu May 16 01:37:42 2013] Off-axis axis estimate = 5.66'
[Thu May 16 23:44:04 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Thu May 16 23:44:04 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Thu May 16 23:44:04 2013] source mask rpix=2.1, npix_max = 27, mask sum = 28, frac = 1.013
[Thu May 16 23:44:04 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 9.26"
[Fri May 17 09:07:12 2013] fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_src35.ximg exists
[Fri May 17 09:07:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_src35.csv
[Fri May 17 09:07:12 2013] fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri May 17 09:07:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_src35.csv
[Fri May 17 09:07:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 09:07:14 2013] fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri May 17 09:07:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src35.csv
[Fri May 17 09:07:14 2013] fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri May 17 09:07:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src35.csv
[Fri May 17 09:07:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160362701_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 09:08:07 2013] Spatial fit model total counts = 4357.540000, observed total counts = 3777.000000
[Fri May 17 09:08:07 2013] Poor agreement between spatial fit and data for source 147
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 09:08:07 2013] Warning, spatial fit 35 centroid is now closest to src. 149
[Fri May 17 09:08:08 2013] Vigneting correction estimate = 1.000000
[Fri May 17 09:08:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 09:08:08 2013] Assessing source extent using major
[Fri May 17 09:08:08 2013] Source does appear to be extended
[Fri May 17 09:08:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 09:08:08 2013] Source is confused with source 111
[Fri May 17 20:00:01 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Fri May 17 20:00:01 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Fri May 17 20:00:01 2013] source mask rpix=2.1, npix_max = 27, mask sum = 28, frac = 1.013
[Fri May 17 20:00:01 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 9.26"
[Sat May 18 04:24:09 2013] fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_src33.ximg exists
[Sat May 18 04:24:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_src33.csv
[Sat May 18 04:24:09 2013] fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_src33_1.ximg exists
[Sat May 18 04:24:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_src33.csv
[Sat May 18 04:24:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 04:24:12 2013] fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sat May 18 04:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sat May 18 04:24:12 2013] fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sat May 18 04:24:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sat May 18 04:24:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160362701_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 04:25:30 2013] Spatial fit model total counts = 4419.260000, observed total counts = 3777.000000
[Sat May 18 04:25:30 2013] Poor agreement between spatial fit and data for source 147
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 18 04:25:30 2013] Warning, spatial fit 33 centroid is now closest to src. 149
[Sat May 18 04:25:31 2013] Vigneting correction estimate = 1.000000
[Sat May 18 04:25:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 04:25:31 2013] Assessing source extent using major
[Sat May 18 04:25:31 2013] Source does appear to be extended
[Sat May 18 04:25:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 08:18:39 2013] XMMSAS src. selection expression = ellipse(19591.383606, 28391.249878, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 08:18:39 2013] Writing source region out to fullrun_mos2_xmm0160362701_pi300-10000_pass1_cl_src147_src.reg
[Sat May 18 08:18:39 2013] Extracting stamp from image fullrun_mos2_xmm0160362701_pi300-10000_cl_sm2.00.img.gz, (188, 289) - (263, 364)
[Sat May 18 08:18:39 2013] XMMSAS bgd. selection expression = annulus(19591.383606, 28391.249878, 1087.500000, 2175.000000, X, Y) && !ellipse(16599.708800, 27191.424360, 1662.328048, 283.577608, 138.155300, X, Y) && !ellipse(18471.992000, 28345.956000, 1565.576045, 538.232015, 321.787400, X, Y) && !ellipse(21292.541855, 30904.243073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19158.591263, 27588.504425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19117.357400, 27995.906000, 1525.776044, 575.456017, 143.245400, X, Y) && !ellipse(19831.252000, 29551.388000, 2298.296066, 454.131213, 320.047600, X, Y) && !ellipse(18171.310000, 28011.042000, 1603.560046, 705.627220, 129.306000, X, Y) && !ellipse(20277.633011, 28912.575500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17449.258179, 27858.592590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17243.605800, 27369.960000, 1597.816046, 1597.816046, 0.000000, X, Y) && !ellipse(18860.228000, 28639.098000, 1578.976045, 620.774418, 151.419000, X, Y) && !ellipse(18623.942703, 27529.706146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18053.723389, 26792.951447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17718.548508, 28598.190826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17436.718475, 26925.121460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16289.474000, 25519.038000, 1700.704049, 1043.856030, 320.352000, X, Y) && !ellipse(20860.540000, 30211.294000, 1475.856042, 672.606419, 143.195000, X, Y) && !ellipse(17025.334000, 28330.226000, 1607.664046, 663.330419, 145.047000, X, Y) && !ellipse(19537.202000, 29043.218000, 1539.792044, 758.504022, 125.926000, X, Y) && !ellipse(18966.264800, 30085.569800, 1250.248036, 1250.248036, 0.000000, X, Y) && !ellipse(17442.108000, 29152.894400, 1614.384046, 1614.384046, 0.000000, X, Y) && !ellipse(17757.975693, 27155.668274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21061.667145, 29270.569031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17666.116600, 26652.407600, 3111.888090, 1195.144034, 325.409900, X, Y) && !ellipse(22087.597015, 27721.874512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20718.547089, 26233.178345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20736.418000, 26709.990000, 1351.528039, 998.720029, 321.463000, X, Y) && !ellipse(17568.992035, 27444.800964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21949.702759, 30393.850861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21515.516525, 26390.496796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22388.653442, 27969.007294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16933.304000, 26025.944000, 1649.520047, 991.520029, 132.896400, X, Y) && !ellipse(22269.163849, 29979.706116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16269.470000, 28198.952000, 1350.376039, 1350.376039, 0.000000, X, Y) && !ellipse(20124.005051, 25975.459961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16659.584000, 28062.316000, 3228.768093, 1388.560040, 118.788400, X, Y) && !ellipse(17672.510300, 30552.111847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17194.481567, 29961.845734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19528.561630, 25634.933868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21558.352000, 27461.020000, 1310.752038, 724.692021, 140.016200, X, Y) && !ellipse(22019.487549, 25961.844971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19663.770325, 30321.246429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20644.130600, 30675.814972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18093.811676, 29959.392487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19777.359116, 30744.909454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18745.901474, 30639.549927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22411.093750, 26485.884033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20621.658432, 25800.055450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18859.810196, 25451.768707, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 08:18:39 2013] Writing fullrun_mos2_xmm0160362701_pi300-10000_pass1_cl_src147.gif