[Tue Jul 17 13:17:01 2012] Detection parameters:
  Position = (348.1, 288.6) = 10 44 38.45 -59 43 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.9 +/- 17.9
  Background counts = 93.2
  Rate = 0.003 +/- 0.0006

[Tue Jul 17 13:17:01 2012] Off-axis axis estimate = 3.67'
[Tue Jul 17 16:36:58 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 16:36:58 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Tue Jul 17 16:36:58 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.868
[Tue Jul 17 16:36:58 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 8.26"
[Tue Jul 17 21:33:08 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src67.ximg exists
[Tue Jul 17 21:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src67.csv
[Tue Jul 17 21:33:08 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src67_1.ximg exists
[Tue Jul 17 21:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src67.csv
[Tue Jul 17 21:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 21:33:10 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Tue Jul 17 21:33:10 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Tue Jul 17 21:33:10 2012] Fit fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Tue Jul 17 21:33:40 2012] Source 86 is offset by 8.959373 and -2.515236 pixels which is larger than
2 X fitted extent = 0.891839 x 0.891839, not incorporating fit results
[Tue Jul 17 21:33:40 2012] Warning, spatial fit 67 centroid is now closest to src. 35
[Tue Jul 17 21:33:41 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:33:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:33:41 2012] Assessing source extent using major
[Tue Jul 17 21:33:41 2012] Source does appear to be extended
[Tue Jul 17 21:33:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 22:56:19 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 22:56:19 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Tue Jul 17 22:56:19 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.868
[Tue Jul 17 22:56:19 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 8.26"
[Wed Jul 18 03:21:39 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src60.ximg exists
[Wed Jul 18 03:21:39 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src60_1.ximg exists
[Wed Jul 18 03:21:39 2012] Fit fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src60 appears to have run properly
[Wed Jul 18 03:21:41 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Wed Jul 18 03:21:41 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Wed Jul 18 03:21:41 2012] Fit fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Wed Jul 18 03:22:04 2012] Warning, spatial fit 60 centroid is now closest to src. 35
[Wed Jul 18 03:22:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 03:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 03:22:04 2012] Assessing source extent using major
[Wed Jul 18 03:22:04 2012] Source does appear to be extended
[Wed Jul 18 03:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 05:21:32 2012] XMMSAS src. selection expression = ellipse(30235.685455, 25061.394440, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 05:21:32 2012] Writing source region out to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src86_src.reg
[Wed Jul 18 05:21:32 2012] Extracting stamp from image fullrun_mos2_xmm0160160901_pi300-10000_cl_sm2.00.img.gz, (311, 251) - (386, 326)
[Wed Jul 18 05:21:32 2012] XMMSAS bgd. selection expression = annulus(30235.685455, 25061.394440, 1087.500000, 2175.000000, X, Y) && !ellipse(26373.622400, 27952.443000, 2420.256070, 2420.256070, 0.000000, X, Y) && !ellipse(30878.561800, 24121.690000, 334.725610, 334.725610, 0.000000, X, Y) && !ellipse(31060.544647, 24559.333710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27333.682678, 28074.884552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27491.494965, 27115.548126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28809.946200, 24572.991800, 391.236811, 391.236811, 0.000000, X, Y) && !ellipse(30187.754211, 23784.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26345.872000, 25151.716000, 2131.008061, 2131.008061, 0.000000, X, Y) && !ellipse(33136.843933, 25362.275635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29192.363000, 26150.616000, 615.117618, 615.117618, 0.000000, X, Y) && !ellipse(29013.904000, 25901.706000, 1211.784035, 1211.784035, 0.000000, X, Y)
[Wed Jul 18 05:21:32 2012] Writing fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src86.gif
[Wed Jul 18 05:55:32 2012] Mean detx,y = (-2577.90, -3971.66) 
[Wed Jul 18 05:55:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 05:55:40 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 05:55:40 2012] Setting source spectrum file to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Wed Jul 18 05:55:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Wed Jul 18 07:13:50 2012] Not generating rmf since there are only 89 counts
[Wed Jul 18 07:13:50 2012] rmf not generated due to insufficient counts
[Wed Jul 18 07:30:19 2012] Updating aperture counts using extracted products
[Wed Jul 18 07:30:20 2012] Error reading totcts from fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Wed Jul 18 07:30:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 07:30:20 2012] Using photon index=1.80, rate=0.00318, arf fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src86.arf
[Wed Jul 18 07:30:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 07:30:20 2012] Updating source flux to 4.5e-14
[Wed Jul 18 07:32:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting