[Tue Jul 17 13:16:58 2012] Detection parameters:
  Position = (419.8, 434.9) = 10 43 57.56 -59 32 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3350.7 +/- 71.5
  Background counts = 37.3
  Rate = 0.1 +/- 0.002

[Tue Jul 17 13:17:01 2012] Off-axis axis estimate = 13.24'
[Tue Jul 17 16:36:58 2012] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 16:36:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 16:36:58 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Tue Jul 17 16:36:58 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.000
[Tue Jul 17 16:36:58 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.05"
[Tue Jul 17 21:33:07 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jul 17 21:33:07 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jul 17 21:33:07 2012] Fit fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src4 appears to have run properly
[Tue Jul 17 21:33:08 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jul 17 21:33:08 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jul 17 21:33:08 2012] Fit fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Jul 17 21:33:40 2012] Warning, spatial fit 4 centroid is now closest to src. 9
[Tue Jul 17 21:33:40 2012] Spatial fit model total counts = 4283.550000, observed total counts = 4289.000000
[Tue Jul 17 21:33:40 2012] Offset between fit and detection position for source 6 = 1.182204 pixels
[Tue Jul 17 21:33:40 2012] Warning, changing simple spatial fit ID from 4 to 15
[Tue Jul 17 21:33:40 2012] 4334.910000 total counts/ 2247.110000 bgd. counts: snr = 44.042983
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.182204 pixels
  Position = (420.4, 436.0) = 10 43 57.26 -59 32 48.1
  Extent = 11.5 (10.4-12.7)", rotation angle = 0
  Source counts = 2087.8 +/- 65.8
  Background counts = 2247.1
  Rate = 0.07 +/- 0.002
[Tue Jul 17 21:33:40 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:33:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:33:40 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 21:33:40 2012] Source does appear to be extended
[Tue Jul 17 21:33:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 22:56:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 22:56:19 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Tue Jul 17 22:56:19 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.909
[Tue Jul 17 22:56:19 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.51"
[Wed Jul 18 03:21:38 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 18 03:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src4.csv
[Wed Jul 18 03:21:38 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 18 03:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src4.csv
[Wed Jul 18 03:21:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 03:21:40 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 18 03:21:40 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 18 03:21:40 2012] Fit fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jul 18 03:22:04 2012] Warning, spatial fit 4 centroid is now closest to src. 14
[Wed Jul 18 03:22:04 2012] Spatial fit model total counts = 3911.950000, observed total counts = 3815.000000
[Wed Jul 18 03:22:04 2012] Offset between fit and detection position for source 6 = 2.589924 pixels
[Wed Jul 18 03:22:04 2012] Warning, changing simple spatial fit ID from 4 to 28
[Wed Jul 18 03:22:04 2012] 3690.370000 total counts/ 1411.910000 bgd. counts: snr = 60.637027
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.589924 pixels
  Position = (417.8, 435.4) = 10 43 58.71 -59 32 50.4
  Extent = 19.0 (18.3-19.8)" x 5.4 (5.2-5.6)", rotation angle = 19 (18-20) degrees
  Source counts = 2278.5 +/- 60.7
  Background counts = 1411.9
  Rate = 0.07 +/- 0.002
[Wed Jul 18 03:22:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 03:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 03:22:04 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 03:22:04 2012] Source does appear to be extended
[Wed Jul 18 03:22:04 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.24
[Wed Jul 18 03:22:04 2012] Source is asymmetric
[Wed Jul 18 03:22:04 2012] Source is confused with source 18
[Wed Jul 18 03:22:04 2012] Source is confused with source 11
[Wed Jul 18 03:22:04 2012] Source is confused with source 9
[Wed Jul 18 05:21:30 2012] Counts = 2278.460000, rescaling region sizes by 2.000000
[Wed Jul 18 05:21:30 2012] XMMSAS src. selection expression = ellipse(36301.698000, 37834.374000, 2279.688066, 646.110019, 19.061000, X, Y)
[Wed Jul 18 05:21:30 2012] Writing source region out to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src6_src.reg
[Wed Jul 18 05:21:30 2012] Extracting stamp from image fullrun_mos2_xmm0160160901_pi300-10000_cl_sm2.00.img.gz, (287, 304) - (549, 566)
[Wed Jul 18 05:21:30 2012] XMMSAS bgd. selection expression = annulus(36301.698000, 37834.374000, 7598.960219, 15197.920437, X, Y) && !ellipse(26373.622400, 27952.443000, 2420.256070, 2420.256070, 0.000000, X, Y) && !ellipse(34349.197800, 25380.716600, 804.616023, 553.420016, 317.981400, X, Y) && !ellipse(34521.107178, 25456.813263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29202.902954, 36545.450195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30878.561800, 24121.690000, 334.725610, 334.725610, 0.000000, X, Y) && !ellipse(26069.023193, 29088.070282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34746.893524, 35735.923798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31060.544647, 24559.333710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27333.682678, 28074.884552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27089.236786, 28494.392456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27491.494965, 27115.548126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24952.009888, 24057.689819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35617.334259, 29525.581940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36556.502000, 37672.258000, 2554.984074, 2554.984074, 0.000000, X, Y) && !ellipse(25062.617400, 23289.643200, 639.800018, 490.535214, 90.000000, X, Y) && !ellipse(30314.835300, 37734.402200, 619.540018, 619.540018, 0.000000, X, Y) && !ellipse(25154.902000, 25963.506000, 736.344021, 736.344021, 0.000000, X, Y) && !ellipse(25524.766083, 30633.530975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.462524, 44530.264954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28809.946200, 24572.991800, 391.236811, 391.236811, 0.000000, X, Y) && !ellipse(26748.298548, 22936.401200, 301.318409, 301.318409, 0.000000, X, Y) && !ellipse(30000.090400, 41096.857800, 389.090411, 389.090411, 0.000000, X, Y) && !ellipse(35494.265686, 37993.808502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31521.587830, 32214.821289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37180.461517, 38296.909302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32206.269440, 33588.788330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23735.948059, 34278.726898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38198.728000, 35438.257400, 765.092022, 765.092022, 0.000000, X, Y) && !ellipse(35367.251800, 36721.321135, 938.779673, 248.240807, 40.442359, X, Y) && !ellipse(29177.581940, 30045.649078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30333.735687, 36774.812866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38599.890625, 34207.795135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37765.637939, 38151.209259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30472.500793, 35159.777130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30187.754211, 23784.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24265.066000, 29552.700000, 1252.912036, 1252.912036, 0.000000, X, Y) && !ellipse(38821.343964, 36549.605316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26022.448669, 22785.585632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27386.318634, 31058.362213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.455200, 31219.506561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26345.872000, 25151.716000, 2131.008061, 2131.008061, 0.000000, X, Y) && !ellipse(24452.875000, 27262.663300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33136.843933, 25362.275635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30235.685455, 25061.394440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39019.664032, 35639.039124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29192.363000, 26150.616000, 615.117618, 615.117618, 0.000000, X, Y) && !ellipse(29013.904000, 25901.706000, 1211.784035, 1211.784035, 0.000000, X, Y) && !ellipse(22753.338000, 24631.168400, 1241.272036, 1241.272036, 0.000000, X, Y) && !ellipse(36943.003662, 35035.935944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38550.020000, 35636.968000, 2104.208061, 2104.208061, 0.000000, X, Y)
[Wed Jul 18 05:21:30 2012] Writing fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src6.gif
[Wed Jul 18 05:33:08 2012] Mean detx,y = (-12870.04, 5732.46) 
[Wed Jul 18 05:33:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 05:36:35 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 05:36:35 2012] Setting source spectrum file to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul 18 05:36:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jul 18 07:30:19 2012] Updating aperture counts using extracted products
[Wed Jul 18 07:30:19 2012] Error reading totcts from fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul 18 07:30:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 07:30:20 2012] Using photon index=1.80, rate=0.0726, arf fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src6.arf
[Wed Jul 18 07:30:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 07:30:20 2012] Updating source flux to 1.8e-12
[Wed Jul 18 07:32:35 2012] Flag c found in src. 6 procflags, skipping spectral fitting