[Tue Jul 17 13:16:58 2012] Detection parameters:
  Position = (397.4, 293.2) = 10 44 10.13 -59 43 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3690.7 +/- 104.4
  Background counts = 50.6
  Rate = 0.2 +/- 0.006

[Tue Jul 17 13:17:01 2012] Off-axis axis estimate = 7.18'
[Tue Jul 17 16:36:58 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 16:36:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 16:36:58 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Tue Jul 17 16:36:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.573
[Tue Jul 17 16:36:58 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.02"
[Tue Jul 17 21:33:06 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul 17 21:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src3.csv
[Tue Jul 17 21:33:06 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul 17 21:33:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src3.csv
[Tue Jul 17 21:33:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 21:33:08 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul 17 21:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul 17 21:33:08 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul 17 21:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul 17 21:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 21:33:40 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.397732 pixels away
[Tue Jul 17 21:33:40 2012] Spatial fit model total counts = 872.819000, observed total counts = 2261.000000
[Tue Jul 17 21:33:40 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 21:33:40 2012] Spatial fit model total counts = 846.026000, observed total counts = 709.000000
[Tue Jul 17 21:33:40 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 21:33:40 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:33:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:33:40 2012] Assessing source extent using major
[Tue Jul 17 21:33:40 2012] Source does appear to be extended
[Tue Jul 17 21:33:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 21:33:41 2012] Source is confused with source 1
[Tue Jul 17 22:56:19 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 22:56:19 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Tue Jul 17 22:56:19 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.573
[Tue Jul 17 22:56:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.02"
[Wed Jul 18 03:21:38 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 18 03:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src3.csv
[Wed Jul 18 03:21:38 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 18 03:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src3.csv
[Wed Jul 18 03:21:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 03:21:40 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 18 03:21:40 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 18 03:21:40 2012] Fit fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jul 18 03:22:04 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.024100 pixels away
[Wed Jul 18 03:22:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 03:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 03:22:04 2012] Assessing source extent using major
[Wed Jul 18 03:22:04 2012] Source does appear to be extended
[Wed Jul 18 03:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 05:21:30 2012] Counts = 3690.700928, rescaling region sizes by 2.000000
[Wed Jul 18 05:21:30 2012] XMMSAS src. selection expression = ellipse(34521.107178, 25456.813263, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul 18 05:21:30 2012] Writing source region out to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src4_src.reg
[Wed Jul 18 05:21:30 2012] Extracting stamp from image fullrun_mos2_xmm0160160901_pi300-10000_cl_sm2.00.img.gz, (322, 218) - (472, 368)
[Wed Jul 18 05:21:30 2012] XMMSAS bgd. selection expression = annulus(34521.107178, 25456.813263, 4350.000000, 8700.000000, X, Y) && !ellipse(26373.622400, 27952.443000, 2420.256070, 2420.256070, 0.000000, X, Y) && !ellipse(34349.197800, 25380.716600, 804.616023, 553.420016, 317.981400, X, Y) && !ellipse(30878.561800, 24121.690000, 334.725610, 334.725610, 0.000000, X, Y) && !ellipse(26069.023193, 29088.070282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31060.544647, 24559.333710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25667.148800, 21893.471800, 422.661612, 339.828810, 14.099300, X, Y) && !ellipse(27333.682678, 28074.884552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27089.236786, 28494.392456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29657.862800, 20951.230600, 353.896810, 353.896810, 0.000000, X, Y) && !ellipse(27491.494965, 27115.548126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24952.009888, 24057.689819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35617.334259, 29525.581940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25154.902000, 25963.506000, 736.344021, 736.344021, 0.000000, X, Y) && !ellipse(25524.766083, 30633.530975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28809.946200, 24572.991800, 391.236811, 391.236811, 0.000000, X, Y) && !ellipse(26748.298548, 22936.401200, 301.318409, 301.318409, 0.000000, X, Y) && !ellipse(31521.587830, 32214.821289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32206.269440, 33588.788330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29177.581940, 30045.649078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38599.890625, 34207.795135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25120.861786, 16335.477371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30187.754211, 23784.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26022.448669, 22785.585632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31683.333000, 19276.812400, 750.307222, 750.307222, 0.000000, X, Y) && !ellipse(27386.318634, 31058.362213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.455200, 31219.506561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26345.872000, 25151.716000, 2131.008061, 2131.008061, 0.000000, X, Y) && !ellipse(28518.978200, 20200.958200, 628.088818, 628.088818, 0.000000, X, Y) && !ellipse(33136.843933, 25362.275635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30235.685455, 25061.394440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37655.738312, 15904.110779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29192.363000, 26150.616000, 615.117618, 615.117618, 0.000000, X, Y) && !ellipse(29013.904000, 25901.706000, 1211.784035, 1211.784035, 0.000000, X, Y) && !ellipse(38550.020000, 35636.968000, 2104.208061, 2104.208061, 0.000000, X, Y)
[Wed Jul 18 05:21:30 2012] Writing fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src4.gif
[Wed Jul 18 05:31:22 2012] Mean detx,y = (-6542.75, -5112.64) 
[Wed Jul 18 05:31:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 05:33:00 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 05:33:00 2012] Setting source spectrum file to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jul 18 05:33:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jul 18 06:06:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 06:06:33 2012] rmf not generated due to insufficient counts
[Wed Jul 18 07:30:19 2012] Updating aperture counts using extracted products
[Wed Jul 18 07:30:19 2012] Error reading totcts from fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jul 18 07:30:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 07:30:20 2012] Using photon index=1.80, rate=0.201, arf fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src4.arf
[Wed Jul 18 07:30:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 07:30:20 2012] Updating source flux to 2.6e-11
[Wed Jul 18 07:32:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting