[Tue Jul 17 13:16:59 2012] Detection parameters:
  Position = (300.2, 334.9) = 10 45 6.00 -59 40 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1164.4 +/- 46.0
  Background counts = 71.0
  Rate = 0.04 +/- 0.002

[Tue Jul 17 13:17:01 2012] Off-axis axis estimate = 2.65'
[Tue Jul 17 16:36:58 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 16:36:58 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Tue Jul 17 16:36:58 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Tue Jul 17 16:36:58 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.75"
[Tue Jul 17 21:33:07 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jul 17 21:33:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src7.csv
[Tue Jul 17 21:33:07 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jul 17 21:33:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src7.csv
[Tue Jul 17 21:33:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 21:33:08 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jul 17 21:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Jul 17 21:33:08 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jul 17 21:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Jul 17 21:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 21:33:40 2012] Warning, spatial fit 7 centroid is now closest to src. 2
[Tue Jul 17 21:33:40 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:33:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:33:40 2012] Assessing source extent using major
[Tue Jul 17 21:33:40 2012] Source does appear to be extended
[Tue Jul 17 21:33:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 21:33:41 2012] Source is confused with source 2
[Tue Jul 17 22:56:19 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 22:56:19 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Tue Jul 17 22:56:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Tue Jul 17 22:56:19 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.75"
[Wed Jul 18 03:21:38 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jul 18 03:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src7.csv
[Wed Jul 18 03:21:38 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jul 18 03:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src7.csv
[Wed Jul 18 03:21:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 03:21:40 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jul 18 03:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Jul 18 03:21:40 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jul 18 03:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Jul 18 03:21:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 03:22:04 2012] Source 26 is offset by -3.505389 and 6.031406 pixels which is larger than
2 X fitted extent = 3.345389 x 3.345389, not incorporating fit results
[Wed Jul 18 03:22:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 03:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 03:22:04 2012] Assessing source extent using major
[Wed Jul 18 03:22:04 2012] Source does appear to be extended
[Wed Jul 18 03:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 05:21:30 2012] Counts = 1164.368774, rescaling region sizes by 2.000000
[Wed Jul 18 05:21:30 2012] XMMSAS src. selection expression = ellipse(26069.023193, 29088.070282, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul 18 05:21:30 2012] Writing source region out to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src26_src.reg
[Wed Jul 18 05:21:30 2012] Extracting stamp from image fullrun_mos2_xmm0160160901_pi300-10000_cl_sm2.00.img.gz, (225, 260) - (375, 410)
[Wed Jul 18 05:21:31 2012] XMMSAS bgd. selection expression = annulus(26069.023193, 29088.070282, 4350.000000, 8700.000000, X, Y) && !ellipse(26373.622400, 27952.443000, 2420.256070, 2420.256070, 0.000000, X, Y) && !ellipse(34349.197800, 25380.716600, 804.616023, 553.420016, 317.981400, X, Y) && !ellipse(34521.107178, 25456.813263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29202.902954, 36545.450195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30878.561800, 24121.690000, 334.725610, 334.725610, 0.000000, X, Y) && !ellipse(34746.893524, 35735.923798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31060.544647, 24559.333710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25667.148800, 21893.471800, 422.661612, 339.828810, 14.099300, X, Y) && !ellipse(27333.682678, 28074.884552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27089.236786, 28494.392456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29657.862800, 20951.230600, 353.896810, 353.896810, 0.000000, X, Y) && !ellipse(27491.494965, 27115.548126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24952.009888, 24057.689819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35617.334259, 29525.581940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36556.502000, 37672.258000, 2554.984074, 2554.984074, 0.000000, X, Y) && !ellipse(25062.617400, 23289.643200, 639.800018, 490.535214, 90.000000, X, Y) && !ellipse(30314.835300, 37734.402200, 619.540018, 619.540018, 0.000000, X, Y) && !ellipse(25154.902000, 25963.506000, 736.344021, 736.344021, 0.000000, X, Y) && !ellipse(25524.766083, 30633.530975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28809.946200, 24572.991800, 391.236811, 391.236811, 0.000000, X, Y) && !ellipse(26748.298548, 22936.401200, 301.318409, 301.318409, 0.000000, X, Y) && !ellipse(35494.265686, 37993.808502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31521.587830, 32214.821289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32206.269440, 33588.788330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23735.948059, 34278.726898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35367.251800, 36721.321135, 938.779673, 248.240807, 40.442359, X, Y) && !ellipse(29177.581940, 30045.649078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30333.735687, 36774.812866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30472.500793, 35159.777130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30187.754211, 23784.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24265.066000, 29552.700000, 1252.912036, 1252.912036, 0.000000, X, Y) && !ellipse(26022.448669, 22785.585632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27386.318634, 31058.362213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.455200, 31219.506561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26345.872000, 25151.716000, 2131.008061, 2131.008061, 0.000000, X, Y) && !ellipse(24452.875000, 27262.663300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28518.978200, 20200.958200, 628.088818, 628.088818, 0.000000, X, Y) && !ellipse(33136.843933, 25362.275635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30235.685455, 25061.394440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29192.363000, 26150.616000, 615.117618, 615.117618, 0.000000, X, Y) && !ellipse(29013.904000, 25901.706000, 1211.784035, 1211.784035, 0.000000, X, Y) && !ellipse(22753.338000, 24631.168400, 1241.272036, 1241.272036, 0.000000, X, Y)
[Wed Jul 18 05:21:31 2012] Writing fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src26.gif
[Wed Jul 18 05:38:42 2012] Mean detx,y = (18.16, 300.10) 
[Wed Jul 18 05:38:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 05:40:44 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 05:40:44 2012] Setting source spectrum file to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jul 18 05:40:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Jul 18 06:14:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 06:14:30 2012] rmf not generated due to insufficient counts
[Wed Jul 18 07:30:19 2012] Updating aperture counts using extracted products
[Wed Jul 18 07:30:19 2012] Error reading totcts from fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jul 18 07:30:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 07:30:20 2012] Using photon index=1.80, rate=0.0408, arf fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src26.arf
[Wed Jul 18 07:30:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 07:30:20 2012] Updating source flux to 4.6e-13
[Wed Jul 18 07:32:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting