[Tue Jul 17 13:16:58 2012] Detection parameters:
  Position = (304.0, 321.9) = 10 45 3.82 -59 41 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85788.6 +/- 345.2
  Background counts = 81.1
  Rate = 3 +/- 0.01

[Tue Jul 17 13:17:01 2012] Off-axis axis estimate = 1.75'
[Tue Jul 17 16:36:58 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 16:36:58 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Jul 17 16:36:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Tue Jul 17 16:36:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Tue Jul 17 21:33:06 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 17 21:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src1.csv
[Tue Jul 17 21:33:06 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 17 21:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src1.csv
[Tue Jul 17 21:33:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 21:33:08 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 17 21:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul 17 21:33:08 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 17 21:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul 17 21:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 21:33:40 2012] Spatial fit model total counts = 111834.000000, observed total counts = 96438.000000
[Tue Jul 17 21:33:40 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 21:33:40 2012] Source 2 is offset by 0.255887 and -6.958402 pixels which is larger than
2 X fitted extent = 3.971628 x 3.971628, not incorporating fit results
[Tue Jul 17 21:33:40 2012] Spatial fit model total counts = 28384.700000, observed total counts = 26414.000000
[Tue Jul 17 21:33:40 2012] Offset between fit and detection position for source 2 = 0.171722 pixels
[Tue Jul 17 21:33:40 2012] Warning, changing simple spatial fit ID from 1 to 11
[Tue Jul 17 21:33:40 2012] 27122.650000 total counts/ 3038.050000 bgd. counts: snr = 436.960298
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.171722 pixels
  Position = (304.1, 322.0) = 10 45 3.75 -59 41 4.8
  Extent = 19.8" x 10.7", rotation angle = 3
  Source counts = 24084.6 +/- 164.7
  Background counts = 3038.1
  Rate = 0.8 +/- 0.005
[Tue Jul 17 21:33:40 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:33:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:33:40 2012] Assessing source extent using major
[Tue Jul 17 21:33:40 2012] Source does appear to be extended
[Tue Jul 17 21:33:40 2012] Computing asymmetry using major and minor axis, asym = 1.84
[Tue Jul 17 21:33:40 2012] Source is asymmetric
[Tue Jul 17 21:33:41 2012] Source is confused with source 26
[Tue Jul 17 21:33:41 2012] Source is confused with source 28
[Tue Jul 17 21:33:41 2012] Source is confused with source 27
[Tue Jul 17 22:56:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 22:56:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 22:56:19 2012] Initial guess for spatial extent in simple fitting = 15.24"
[Tue Jul 17 22:56:19 2012] source mask rpix=3.5, npix_max = 64, mask sum = 59, frac = 0.920
[Tue Jul 17 22:56:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.24"
[Wed Jul 18 03:21:38 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 18 03:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 03:21:38 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 18 03:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src1.csv
[Wed Jul 18 03:21:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 03:21:40 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 18 03:21:40 2012] fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 18 03:21:40 2012] Fit fullrun_mos2_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 18 03:22:04 2012] Spatial fit model total counts = 114647.000000, observed total counts = 110902.000000
[Wed Jul 18 03:22:04 2012] Offset between fit and detection position for source 2 = 0.461582 pixels
[Wed Jul 18 03:22:04 2012] 114395.400000 total counts/ 26541.000000 bgd. counts: snr = 539.268281
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.461582 pixels
  Position = (303.7, 321.8) = 10 45 3.99 -59 41 5.7
  Extent = 10.1 (10.0-10.1)", rotation angle = 0
  Source counts = 87854.4 +/- 338.2
  Background counts = 26541.0
  Rate = 3 +/- 0.01
[Wed Jul 18 03:22:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 03:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 03:22:04 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 03:22:04 2012] Source does appear to be extended
[Wed Jul 18 03:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 05:21:30 2012] Counts = 87854.400000, rescaling region sizes by 3.000000
[Wed Jul 18 05:21:30 2012] XMMSAS src. selection expression = ellipse(26373.622400, 27952.443000, 1815.192052, 1815.192052, 0.000000, X, Y)
[Wed Jul 18 05:21:30 2012] Writing source region out to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul 18 05:21:30 2012] Extracting stamp from image fullrun_mos2_xmm0160160901_pi300-10000_cl_sm2.00.img.gz, (199, 218) - (408, 426)
[Wed Jul 18 05:21:30 2012] XMMSAS bgd. selection expression = annulus(26373.622400, 27952.443000, 9075.960261, 18151.920522, X, Y) && !ellipse(34349.197800, 25380.716600, 804.616023, 553.420016, 317.981400, X, Y) && !ellipse(34521.107178, 25456.813263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36301.698000, 37834.374000, 1519.792044, 430.740012, 19.061000, X, Y) && !ellipse(29202.902954, 36545.450195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30878.561800, 24121.690000, 334.725610, 334.725610, 0.000000, X, Y) && !ellipse(26069.023193, 29088.070282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34746.893524, 35735.923798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31060.544647, 24559.333710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25667.148800, 21893.471800, 422.661612, 339.828810, 14.099300, X, Y) && !ellipse(27333.682678, 28074.884552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27089.236786, 28494.392456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29657.862800, 20951.230600, 353.896810, 353.896810, 0.000000, X, Y) && !ellipse(27491.494965, 27115.548126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24952.009888, 24057.689819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35617.334259, 29525.581940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36556.502000, 37672.258000, 2554.984074, 2554.984074, 0.000000, X, Y) && !ellipse(25062.617400, 23289.643200, 639.800018, 490.535214, 90.000000, X, Y) && !ellipse(16488.606186, 25462.269348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30314.835300, 37734.402200, 619.540018, 619.540018, 0.000000, X, Y) && !ellipse(25154.902000, 25963.506000, 736.344021, 736.344021, 0.000000, X, Y) && !ellipse(21431.046768, 19124.683884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25524.766083, 30633.530975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28279.462524, 44530.264954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28809.946200, 24572.991800, 391.236811, 391.236811, 0.000000, X, Y) && !ellipse(26748.298548, 22936.401200, 301.318409, 301.318409, 0.000000, X, Y) && !ellipse(30000.090400, 41096.857800, 389.090411, 389.090411, 0.000000, X, Y) && !ellipse(35494.265686, 37993.808502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31521.587830, 32214.821289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37180.461517, 38296.909302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27243.722321, 11835.527954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32206.269440, 33588.788330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23735.948059, 34278.726898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38198.728000, 35438.257400, 765.092022, 765.092022, 0.000000, X, Y) && !ellipse(35367.251800, 36721.321135, 938.779673, 248.240807, 40.442359, X, Y) && !ellipse(29177.581940, 30045.649078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30333.735687, 36774.812866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38599.890625, 34207.795135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25120.861786, 16335.477371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37765.637939, 38151.209259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30472.500793, 35159.777130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35846.484528, 14204.659714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30187.754211, 23784.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24265.066000, 29552.700000, 1252.912036, 1252.912036, 0.000000, X, Y) && !ellipse(38821.343964, 36549.605316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26022.448669, 22785.585632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31683.333000, 19276.812400, 750.307222, 750.307222, 0.000000, X, Y) && !ellipse(27386.318634, 31058.362213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.455200, 31219.506561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26345.872000, 25151.716000, 2131.008061, 2131.008061, 0.000000, X, Y) && !ellipse(24452.875000, 27262.663300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28518.978200, 20200.958200, 628.088818, 628.088818, 0.000000, X, Y) && !ellipse(33136.843933, 25362.275635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30235.685455, 25061.394440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39019.664032, 35639.039124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37655.738312, 15904.110779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29192.363000, 26150.616000, 615.117618, 615.117618, 0.000000, X, Y) && !ellipse(29013.904000, 25901.706000, 1211.784035, 1211.784035, 0.000000, X, Y) && !ellipse(22753.338000, 24631.168400, 1241.272036, 1241.272036, 0.000000, X, Y) && !ellipse(36943.003662, 35035.935944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38550.020000, 35636.968000, 2104.208061, 2104.208061, 0.000000, X, Y)
[Wed Jul 18 05:21:30 2012] Writing fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src2.gif
[Wed Jul 18 05:21:46 2012] Mean detx,y = (43.95, 92.79) 
[Wed Jul 18 05:21:49 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 05:30:12 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 05:30:12 2012] Setting source spectrum file to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 18 05:30:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul 18 07:30:19 2012] Updating aperture counts using extracted products
[Wed Jul 18 07:30:19 2012] Error reading totcts from fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 18 07:30:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 07:30:20 2012] Using photon index=1.80, rate=2.8, arf fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src2.arf
[Wed Jul 18 07:30:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 07:30:20 2012] Updating source flux to 3.1e-11
[Wed Jul 18 07:32:35 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Wed Jul 18 07:32:35 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Wed Jul 18 07:32:35 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Jul 18 07:37:27 2012] Reading fit data from xmm0160160901/analysis//spectral/fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src2_pl.csv
[Wed Jul 18 07:37:27 2012] Spectral fit parameter nH value = 1.60075e+16
[Wed Jul 18 07:37:27 2012] Spectral fit parameter PhoIndex value = -0.372607
[Wed Jul 18 07:37:27 2012] Failed to get F(0.3-8.0) from xmm0160160901/analysis//spectral/fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Jul 18 07:37:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 07:37:27 2012] Using Nh = 1.6e+16, photon index=-0.37, rate=2.8, arf fullrun_mos2_xmm0160160901_pi300-10000_pass1_cl_src2.arf
[Wed Jul 18 07:37:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 07:37:27 2012] Updating source flux to 8.1e-11