[Tue Jul 17 13:15:50 2012] Detection parameters:
  Position = (424.0, 447.0) = 10 43 55.21 -59 31 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.0 +/- 18.9
  Background counts = 38.1
  Rate = 0.005 +/- 0.0006

[Tue Jul 17 13:15:52 2012] Off-axis axis estimate = 14.10'
[Tue Jul 17 13:58:25 2012] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 13:58:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 13:58:25 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Tue Jul 17 13:58:25 2012] source mask rpix=3.1, npix_max = 51, mask sum = 64, frac = 1.235
[Tue Jul 17 13:58:25 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 13.48"
[Tue Jul 17 16:36:56 2012] fullrun_mos1_xmm0160160901_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jul 17 16:36:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160160901_pi300-10000_cl_pass0_src15.csv
[Tue Jul 17 16:36:56 2012] fullrun_mos1_xmm0160160901_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jul 17 16:36:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160160901_pi300-10000_cl_pass0_src15.csv
[Tue Jul 17 16:36:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160160901_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160160901_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 16:36:57 2012] fullrun_mos1_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jul 17 16:36:57 2012] fullrun_mos1_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jul 17 16:36:57 2012] Fit fullrun_mos1_xmm0160160901_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jul 17 21:33:23 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.115902 pixels away
[Tue Jul 17 21:33:23 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 21:33:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 21:33:23 2012] Assessing source extent using major
[Tue Jul 17 21:33:23 2012] Source does appear to be extended
[Tue Jul 17 21:33:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 22:10:53 2012] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 22:10:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 22:10:53 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Tue Jul 17 22:10:53 2012] source mask rpix=3.1, npix_max = 51, mask sum = 64, frac = 1.235
[Tue Jul 17 22:10:53 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 13.48"
[Tue Jul 17 22:56:18 2012] fullrun_mos1_xmm0160160901_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jul 17 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160160901_pi300-10000_cl_pass1_src15.csv
[Tue Jul 17 22:56:18 2012] fullrun_mos1_xmm0160160901_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jul 17 22:56:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160160901_pi300-10000_cl_pass1_src15.csv
[Tue Jul 17 22:56:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160160901_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160160901_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 22:56:19 2012] fullrun_mos1_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jul 17 22:56:19 2012] fullrun_mos1_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jul 17 22:56:19 2012] Fit fullrun_mos1_xmm0160160901_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Jul 18 03:21:49 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.892684 pixels away
[Wed Jul 18 03:21:49 2012] Source 8 is offset by 2.936297 and -5.940813 pixels which is larger than
2 X fitted extent = 1.555563 x 1.555563, not incorporating fit results
[Wed Jul 18 03:21:49 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 03:21:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 03:21:49 2012] Assessing source extent using major
[Wed Jul 18 03:21:49 2012] Source does appear to be extended
[Wed Jul 18 03:21:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 03:21:49 2012] Source is confused with source 9
[Wed Jul 18 04:02:30 2012] XMMSAS src. selection expression = ellipse(36838.785797, 38840.821259, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 04:02:30 2012] Writing source region out to fullrun_mos1_xmm0160160901_pi300-10000_pass1_cl_src8_src.reg
[Wed Jul 18 04:02:30 2012] Extracting stamp from image fullrun_mos1_xmm0160160901_pi300-10000_cl_sm2.00.img.gz, (386, 410) - (461, 485)
[Wed Jul 18 04:02:30 2012] XMMSAS bgd. selection expression = annulus(36838.785797, 38840.821259, 1087.500000, 2175.000000, X, Y) && !ellipse(36694.968000, 37600.798000, 1041.648030, 1041.648030, 0.000000, X, Y) && !ellipse(36027.090000, 38036.116400, 2056.376059, 783.345623, 3.772920, X, Y) && !ellipse(37794.622894, 37101.543427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35355.772000, 36729.014200, 1132.840033, 248.300007, 33.639800, X, Y) && !ellipse(37737.951294, 38203.115082, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 04:02:30 2012] Writing fullrun_mos1_xmm0160160901_pi300-10000_pass1_cl_src8.gif
[Wed Jul 18 04:14:01 2012] Mean detx,y = (6634.33, 13359.47) 
[Wed Jul 18 04:14:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 04:14:13 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 04:14:13 2012] Setting source spectrum file to fullrun_mos1_xmm0160160901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jul 18 04:14:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0160160901_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jul 18 05:13:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 05:13:44 2012] rmf not generated due to insufficient counts
[Wed Jul 18 07:30:18 2012] Updating aperture counts using extracted products
[Wed Jul 18 07:30:18 2012] Error reading totcts from fullrun_mos1_xmm0160160901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jul 18 07:30:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 07:30:19 2012] Using photon index=1.80, rate=0.0052, arf fullrun_mos1_xmm0160160901_pi300-10000_pass1_cl_src8.arf
[Wed Jul 18 07:30:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 07:30:19 2012] Updating source flux to 1.4e-13
[Wed Jul 18 07:30:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting