[Sat Apr 7 05:15:37 2012] Detection parameters: Position = (350.4, 287.6) = 10 44 38.29 -59 43 31.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 83.9 +/- 18.1 Background counts = 110.8 Rate = 0.003 +/- 0.0007 [Sat Apr 7 05:15:38 2012] Off-axis axis estimate = 3.85' [Sat Apr 7 06:19:41 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting [Sat Apr 7 06:19:41 2012] Initial guess for spatial extent in simple fitting = 8.35" [Sat Apr 7 06:19:41 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.067 [Sat Apr 7 06:19:41 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 8.35" [Sat Apr 7 08:46:11 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src50.ximg exists [Sat Apr 7 08:46:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src50.csv [Sat Apr 7 08:46:11 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src50_1.ximg exists [Sat Apr 7 08:46:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src50.csv [Sat Apr 7 08:46:11 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src50_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Apr 7 08:46:11 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists [Sat Apr 7 08:46:11 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists [Sat Apr 7 08:46:11 2012] Fit fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly [Sat Apr 7 08:46:23 2012] Source 54 is offset by -5.745931 and 6.994609 pixels which is larger than 2 X fitted extent = 2.399738 x 2.399738, not incorporating fit results [Sat Apr 7 08:46:23 2012] Vigneting correction estimate = 1.000000 [Sat Apr 7 08:46:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Apr 7 08:46:23 2012] Assessing source extent using major [Sat Apr 7 08:46:23 2012] Source does appear to be extended [Sat Apr 7 08:46:23 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Apr 7 09:48:09 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting [Sat Apr 7 09:48:09 2012] Initial guess for spatial extent in simple fitting = 8.35" [Sat Apr 7 09:48:09 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.067 [Sat Apr 7 09:48:09 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 8.35" [Sat Apr 7 14:16:01 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src45.ximg exists [Sat Apr 7 14:16:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src45.csv [Sat Apr 7 14:16:01 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src45_1.ximg exists [Sat Apr 7 14:16:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src45.csv [Sat Apr 7 14:16:01 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src45_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Apr 7 14:16:02 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists [Sat Apr 7 14:16:02 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists [Sat Apr 7 14:16:02 2012] Fit fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly [Sat Apr 7 14:16:18 2012] Spatial fit model total counts = 1088.420000, observed total counts = 1090.000000 [Sat Apr 7 14:16:18 2012] Offset between fit and detection position for source 54 = 6.351347 pixels [Sat Apr 7 14:16:18 2012] 1051.009000 total counts/ 858.410000 bgd. counts: snr = 6.573651 Spatial fit parameters: Offset between fit and detection position for source 54 = 6.351347 pixels Position = (348.0, 293.5) = 10 44 39.67 -59 43 5.8 Extent = 16.7 (16.7-33.4)", rotation angle = 0 Source counts = 192.6 +/- 32.4 Background counts = 858.4 Rate = 0.008 +/- 0.001 [Sat Apr 7 14:16:18 2012] Vigneting correction estimate = 1.000000 [Sat Apr 7 14:16:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Apr 7 14:16:18 2012] Assessing source extent using major axis lower bound [Sat Apr 7 14:16:18 2012] Source does appear to be extended [Sat Apr 7 14:16:18 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Apr 7 16:00:58 2012] XMMSAS src. selection expression = ellipse(30230.026800, 25486.704000, 1002.372029, 1002.372029, 0.000000, X, Y) [Sat Apr 7 16:00:58 2012] Writing source region out to fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src54_src.reg [Sat Apr 7 16:00:58 2012] Extracting stamp from image fullrun_mos2_xmm0160160101_pi300-10000_cl_sm2.00.img.gz, (290, 236) - (406, 351) [Sat Apr 7 16:00:58 2012] XMMSAS bgd. selection expression = annulus(30230.026800, 25486.704000, 1670.620048, 3341.240096, X, Y) && !ellipse(26558.647766, 27882.546265, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(34576.881378, 25351.246643, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(31040.530400, 24057.682800, 378.168811, 378.168811, 0.000000, X, Y) && !ellipse(27456.552124, 27978.674255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27169.668243, 28757.965179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26985.710200, 23329.857200, 412.904812, 412.904812, 0.000000, X, Y) && !ellipse(29819.935200, 24044.162000, 473.200814, 473.200814, 0.000000, X, Y) && !ellipse(33971.853302, 25227.925842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27716.681274, 26847.820282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28972.657800, 24494.411400, 277.258408, 277.258408, 0.000000, X, Y) && !ellipse(26918.194489, 22855.513794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27051.893799, 29539.998749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31943.440125, 22738.387177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27390.755188, 26237.322845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32064.538666, 23600.820343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.170319, 24368.447723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28864.503540, 27789.614929, 870.000000, 870.000000, 0.000000, X, Y) [Sat Apr 7 16:00:58 2012] Writing fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src54.gif [Sat Apr 7 16:29:38 2012] Mean detx,y = (-2821.33, -3197.61) [Sat Apr 7 16:29:39 2012] Setting backscal keywords in source and bgd. spectrum [Sat Apr 7 16:29:53 2012] Binned source spectrum to 10 counts/bin [Sat Apr 7 16:29:53 2012] Setting source spectrum file to fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src54_src_b10.pi.gz [Sat Apr 7 16:29:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src54_bgd.pi.gz [Sat Apr 7 18:14:26 2012] Updating aperture counts using extracted products [Sat Apr 7 18:14:26 2012] Error reading totcts from fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src54_src_b10.pi.gz [Sat Apr 7 18:14:27 2012] Calculating source flux in energy range 0.30-8.00 [Sat Apr 7 18:14:27 2012] Using photon index=1.80, rate=0.00784, arf fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src54.arf [Sat Apr 7 18:14:27 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Apr 7 18:14:27 2012] Updating source flux to 8.9e-14 [Sat Apr 7 18:16:17 2012] Flag b found in src. 54 procflags, skipping spectral fitting