[Sat Apr  7 05:15:36 2012] Detection parameters:
  Position = (305.8, 321.0) = 10 45 3.94 -59 41 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69407.3 +/- 312.6
  Background counts = 104.5
  Rate = 3 +/- 0.01

[Sat Apr  7 05:15:38 2012] Off-axis axis estimate = 1.72'
[Sat Apr  7 06:19:41 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 06:19:41 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Apr  7 06:19:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Apr  7 06:19:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Apr  7 08:46:10 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Apr  7 08:46:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src1.csv
[Sat Apr  7 08:46:10 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Apr  7 08:46:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src1.csv
[Sat Apr  7 08:46:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 08:46:11 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Apr  7 08:46:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Apr  7 08:46:11 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Apr  7 08:46:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Apr  7 08:46:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 08:46:23 2012] Spatial fit model total counts = 80015.500000, observed total counts = 68096.000000
[Sat Apr  7 08:46:23 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 08:46:23 2012] Spatial fit model total counts = 19226.400000, observed total counts = 16035.000000
[Sat Apr  7 08:46:23 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 08:46:23 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 08:46:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 08:46:23 2012] Assessing source extent using major
[Sat Apr  7 08:46:23 2012] Source does appear to be extended
[Sat Apr  7 08:46:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 09:48:09 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 09:48:09 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Apr  7 09:48:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Apr  7 09:48:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Sat Apr  7 14:16:00 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Apr  7 14:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src1.csv
[Sat Apr  7 14:16:00 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Apr  7 14:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src1.csv
[Sat Apr  7 14:16:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 14:16:01 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Apr  7 14:16:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Apr  7 14:16:01 2012] fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Apr  7 14:16:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Apr  7 14:16:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0160160101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 14:16:18 2012] Spatial fit model total counts = 80129.500000, observed total counts = 68096.000000
[Sat Apr  7 14:16:18 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Apr  7 14:16:18 2012] Source 2 is offset by -3.272738 and 0.704693 pixels which is larger than
2 X fitted extent = 2.343168 x 2.343168, not incorporating fit results
[Sat Apr  7 14:16:18 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 14:16:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 14:16:18 2012] Assessing source extent using major
[Sat Apr  7 14:16:18 2012] Source does appear to be extended
[Sat Apr  7 14:16:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 16:00:57 2012] Counts = 69407.265625, rescaling region sizes by 3.000000
[Sat Apr  7 16:00:57 2012] XMMSAS src. selection expression = ellipse(26558.647766, 27882.546265, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sat Apr  7 16:00:57 2012] Writing source region out to fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src2_src.reg
[Sat Apr  7 16:00:57 2012] Extracting stamp from image fullrun_mos2_xmm0160160101_pi300-10000_cl_sm2.00.img.gz, (193, 209) - (418, 434)
[Sat Apr  7 16:00:57 2012] XMMSAS bgd. selection expression = annulus(26558.647766, 27882.546265, 9787.500000, 19575.000000, X, Y) && !ellipse(34576.881378, 25351.246643, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29347.258320, 36484.472000, 551.095216, 551.095216, 0.000000, X, Y) && !ellipse(36751.042000, 37801.522000, 684.736020, 684.736020, 0.000000, X, Y) && !ellipse(31040.530400, 24057.682800, 378.168811, 378.168811, 0.000000, X, Y) && !ellipse(34868.747400, 35676.235600, 554.040816, 554.040816, 0.000000, X, Y) && !ellipse(26162.071868, 29037.998823, 344.811140, 242.055862, 350.741354, X, Y) && !ellipse(25808.629860, 21826.485600, 363.464810, 363.464810, 0.000000, X, Y) && !ellipse(27456.552124, 27978.674255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27169.668243, 28757.965179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16660.489400, 25410.691200, 371.762411, 371.762411, 0.000000, X, Y) && !ellipse(29853.170074, 20867.923019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35772.353455, 29438.056244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25195.267180, 23230.488000, 592.172817, 592.172817, 0.000000, X, Y) && !ellipse(25125.579773, 23986.500519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30517.171661, 37664.385742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24569.016060, 24829.482800, 292.268808, 292.268808, 0.000000, X, Y) && !ellipse(26985.710200, 23329.857200, 412.904812, 412.904812, 0.000000, X, Y) && !ellipse(37068.886000, 36936.030000, 784.611223, 784.611223, 0.000000, X, Y) && !ellipse(29819.935200, 24044.162000, 473.200814, 473.200814, 0.000000, X, Y) && !ellipse(33971.853302, 25227.925842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.305542, 21225.023132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36041.816000, 37905.784400, 2061.160059, 695.740820, 15.540600, X, Y) && !ellipse(27716.681274, 26847.820282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29627.057159, 33196.226318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28972.657800, 24494.411400, 277.258408, 277.258408, 0.000000, X, Y) && !ellipse(26918.194489, 22855.513794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22782.035858, 26876.773376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27051.893799, 29539.998749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35156.845978, 33751.475250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31943.440125, 22738.387177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37315.076813, 29860.909485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35404.005310, 35647.102448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20688.688000, 17948.038000, 1625.952047, 1625.952047, 0.000000, X, Y) && !ellipse(35990.198800, 14128.645000, 498.480814, 498.480814, 0.000000, X, Y) && !ellipse(27390.755188, 26237.322845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27405.466705, 11797.444214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36958.135620, 39496.394000, 2158.216062, 1369.784039, 89.983000, X, Y) && !ellipse(22007.356720, 18231.379364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39318.436800, 34291.480000, 1421.504041, 1421.504041, 0.000000, X, Y) && !ellipse(32064.538666, 23600.820343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25442.321200, 25850.256600, 1320.672038, 683.835220, 358.407209, X, Y) && !ellipse(35180.306000, 39570.500000, 2126.536061, 2126.536061, 0.000000, X, Y) && !ellipse(36541.372070, 36585.015442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34343.196320, 13879.576599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30230.026800, 25486.704000, 1336.496038, 1336.496038, 0.000000, X, Y) && !ellipse(38077.380859, 36917.427765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40362.620000, 33371.670000, 2107.256061, 2107.256061, 0.000000, X, Y) && !ellipse(39030.844000, 36746.094000, 2121.896061, 2121.896061, 0.000000, X, Y) && !ellipse(32177.170319, 24368.447723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38815.497589, 34080.149292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39255.440000, 35430.411400, 1261.512036, 757.672022, 113.212219, X, Y) && !ellipse(28864.503540, 27789.614929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37741.516998, 36335.644470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38611.272736, 36530.138641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21505.676000, 18567.830000, 1603.296046, 1603.296046, 0.000000, X, Y) && !ellipse(17176.565430, 16242.288498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29103.071198, 11500.830978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38677.318000, 37560.417600, 2160.424062, 673.364819, 341.551400, X, Y)
[Sat Apr  7 16:00:57 2012] Writing fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src2.gif
[Sat Apr  7 16:01:11 2012] Mean detx,y = (71.16, 98.38) 
[Sat Apr  7 16:01:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 16:08:01 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 16:08:01 2012] Setting source spectrum file to fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Apr  7 16:08:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Apr  7 16:35:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Apr  7 16:35:43 2012] rmf not generated due to insufficient counts
[Sat Apr  7 18:14:26 2012] Updating aperture counts using extracted products
[Sat Apr  7 18:14:26 2012] Error reading totcts from fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Apr  7 18:14:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 18:14:26 2012] Using photon index=1.80, rate=2.52, arf fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src2.arf
[Sat Apr  7 18:14:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 18:14:26 2012] Updating source flux to 2.6e-11
[Sat Apr  7 18:16:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Apr  7 18:26:28 2012] xmm0160160101/analysis//spectral/fullrun_mos2_xmm0160160101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete