[Sat Apr  7 05:15:35 2012] Detection parameters:
  Position = (351.0, 433.4) = 10 44 38.11 -59 32 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.4 +/- 15.0
  Background counts = 45.2
  Rate = 0.003 +/- 0.0005

[Sat Apr  7 05:15:36 2012] Off-axis axis estimate = 10.50'
[Sat Apr  7 05:35:02 2012] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 05:35:02 2012] Initial guess for spatial extent in simple fitting = 11.68"
[Sat Apr  7 05:35:02 2012] source mask rpix=2.7, npix_max = 40, mask sum = 27, frac = 0.666
[Sat Apr  7 05:35:02 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 11.68"
[Sat Apr  7 06:19:41 2012] fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_src24.ximg exists
[Sat Apr  7 06:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_src24.csv
[Sat Apr  7 06:19:41 2012] fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Apr  7 06:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_src24.csv
[Sat Apr  7 06:19:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 06:19:41 2012] fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Apr  7 06:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Apr  7 06:19:41 2012] fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Apr  7 06:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Apr  7 06:19:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0160160101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 08:46:16 2012] Source 11 is offset by 4.626900 and 3.998330 pixels which is larger than
2 X fitted extent = 1.046745 x 1.046745, not incorporating fit results
[Sat Apr  7 08:46:16 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.300762 pixels away
[Sat Apr  7 08:46:16 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 08:46:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 08:46:16 2012] Assessing source extent using major
[Sat Apr  7 08:46:16 2012] Source does appear to be extended
[Sat Apr  7 08:46:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 08:46:16 2012] Deleting source due to low Poisson probability 0.9