[Mon Dec 26 10:22:33 2011] Detection parameters:
  Position = (181.5, 213.2) = 12 29 42.54 1 55 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 775.0 +/- 33.9
  Background counts = 18.9
  Rate = 0.01 +/- 0.0006

[Mon Dec 26 10:22:37 2011] Off-axis axis estimate = 10.49'
[Mon Dec 26 17:04:29 2011] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 17:04:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 26 17:04:29 2011] Initial guess for spatial extent in simple fitting = 11.67"
[Mon Dec 26 17:04:29 2011] source mask rpix=2.7, npix_max = 40, mask sum = 41, frac = 1.011
[Mon Dec 26 17:04:29 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 11.67"
[Mon Dec 26 20:02:08 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src4.ximg exists
[Mon Dec 26 20:02:08 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src4.csv
[Mon Dec 26 20:02:08 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Dec 26 20:02:08 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src4.csv
[Mon Dec 26 20:02:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:02:09 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Dec 26 20:02:09 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Dec 26 20:02:09 2011] Fit fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Dec 26 20:02:38 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.292317 pixels away
[Mon Dec 26 20:02:38 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:02:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:02:38 2011] Assessing source extent using major
[Mon Dec 26 20:02:38 2011] Source does appear to be extended
[Mon Dec 26 20:02:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 04:20:47 2011] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 04:20:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 04:20:47 2011] Initial guess for spatial extent in simple fitting = 11.67"
[Tue Dec 27 04:20:47 2011] source mask rpix=2.7, npix_max = 40, mask sum = 41, frac = 1.011
[Tue Dec 27 04:20:47 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 11.67"
[Tue Dec 27 07:46:40 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Dec 27 07:46:40 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Dec 27 07:46:40 2011] Fit fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_src4 appears to have run properly
[Tue Dec 27 07:46:40 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Dec 27 07:46:40 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Dec 27 07:46:40 2011] Fit fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Dec 27 07:46:58 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.292317 pixels away
[Tue Dec 27 07:46:58 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 07:46:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 07:46:58 2011] Assessing source extent using major
[Tue Dec 27 07:46:58 2011] Source does appear to be extended
[Tue Dec 27 07:46:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 09:57:18 2011] XMMSAS src. selection expression = ellipse(15741.299072, 18502.830887, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 09:57:18 2011] Writing source region out to fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src4_src.reg
[Wed Dec 28 09:57:18 2011] Extracting stamp from image fullrun_mos2_xmm0159960101_pi300-10000_cl_sm2.00.img.gz, (144, 176) - (219, 251)
[Wed Dec 28 09:57:18 2011] XMMSAS bgd. selection expression = annulus(15741.299072, 18502.830887, 1087.500000, 2175.000000, X, Y) && !ellipse(14312.597500, 16856.516600, 403.154412, 403.154412, 0.000000, X, Y) && !ellipse(18086.094400, 20374.051200, 548.320016, 548.320016, 0.000000, X, Y)
[Wed Dec 28 09:57:18 2011] Writing fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src4.gif
[Wed Dec 28 10:32:34 2011] Mean detx,y = (13381.75, -4614.41) 
[Wed Dec 28 10:32:38 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 10:33:06 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 10:33:08 2011] Setting source spectrum file to fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Dec 28 10:33:08 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Dec 28 11:36:03 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 11:36:03 2011] rmf not generated due to insufficient counts
[Wed Dec 28 12:15:44 2011] Updating aperture counts using extracted products
[Wed Dec 28 12:15:44 2011] Error reading totcts from fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Dec 28 12:15:45 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 12:15:45 2011] Using photon index=1.80, rate=0.0133, arf fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src4.arf
[Wed Dec 28 12:15:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 12:15:45 2011] Updating source flux to 3.5e-13
[Wed Dec 28 12:18:00 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting