[Mon Dec 26 10:22:32 2011] Detection parameters:
  Position = (305.0, 320.1) = 12 29 6.70 2 3 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 957854.3 +/- 1096.3
  Background counts = 37.8
  Rate = 2e+01 +/- 0.02

[Mon Dec 26 10:22:37 2011] Off-axis axis estimate = 1.64'
[Mon Dec 26 17:04:29 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 17:04:29 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Dec 26 17:04:29 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon Dec 26 17:04:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon Dec 26 20:02:08 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Dec 26 20:02:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src1.csv
[Mon Dec 26 20:02:08 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Dec 26 20:02:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src1.csv
[Mon Dec 26 20:02:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 20:02:09 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 26 20:02:09 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 26 20:02:09 2011] Fit fullrun_mos2_xmm0159960101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 26 20:02:38 2011] Spatial fit model total counts = 828024.000000, observed total counts = 872414.000000
[Mon Dec 26 20:02:38 2011] Offset between fit and detection position for source 1 = 0.228356 pixels
[Mon Dec 26 20:02:38 2011] 824755.000000 total counts/ 25600.000000 bgd. counts: snr = 4994.718750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.228356 pixels
  Position = (304.8, 320.2) = 12 29 6.76 2 3 6.8
  Extent = 7.6 (7.6-7.6)", rotation angle = 0
  Source counts = 799155.0 +/- 908.2
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Mon Dec 26 20:02:38 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 20:02:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 20:02:38 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 20:02:38 2011] Source does appear to be extended
[Mon Dec 26 20:02:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 04:20:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 04:20:47 2011] Initial guess for spatial extent in simple fitting = 7.57"
[Tue Dec 27 04:20:47 2011] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Tue Dec 27 04:20:47 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.57"
[Tue Dec 27 07:46:40 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Dec 27 07:46:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_src1.csv
[Tue Dec 27 07:46:40 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Dec 27 07:46:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_src1.csv
[Tue Dec 27 07:46:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 07:46:40 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Dec 27 07:46:40 2011] fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Dec 27 07:46:40 2011] Fit fullrun_mos2_xmm0159960101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Dec 27 07:46:58 2011] Spatial fit model total counts = 829525.000000, observed total counts = 872671.000000
[Tue Dec 27 07:46:58 2011] Offset between fit and detection position for source 1 = 0.008964 pixels
[Tue Dec 27 07:46:58 2011] 824382.000000 total counts/ 25600.000000 bgd. counts: snr = 4992.387500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008964 pixels
  Position = (304.8, 320.2) = 12 29 6.76 2 3 6.9
  Extent = 7.6 (7.5-7.6)", rotation angle = 0
  Source counts = 798782.0 +/- 908.0
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Tue Dec 27 07:46:58 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 07:46:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 07:46:58 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 07:46:58 2011] Source does appear to be extended
[Tue Dec 27 07:46:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 09:57:17 2011] Counts = 798782.000000, rescaling region sizes by 3.000000
[Wed Dec 28 09:57:17 2011] XMMSAS src. selection expression = ellipse(26470.030000, 27806.582600, 1361.169039, 1361.169039, 0.000000, X, Y)
[Wed Dec 28 09:57:17 2011] Writing source region out to fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src1_src.reg
[Wed Dec 28 09:57:17 2011] Extracting stamp from image fullrun_mos2_xmm0159960101_pi300-10000_cl_sm2.00.img.gz, (227, 242) - (383, 398)
[Wed Dec 28 09:57:17 2011] XMMSAS bgd. selection expression = annulus(26470.030000, 27806.582600, 6805.845196, 13611.690392, X, Y) && !ellipse(27418.229431, 27966.737244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35336.317400, 20836.804600, 523.522415, 523.522415, 0.000000, X, Y) && !ellipse(15741.299072, 18502.830887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18363.514862, 21857.926361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14312.597500, 16856.516600, 403.154412, 403.154412, 0.000000, X, Y) && !ellipse(18086.094400, 20374.051200, 548.320016, 548.320016, 0.000000, X, Y) && !ellipse(12455.266220, 33939.390259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27774.353821, 15192.718246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19785.281723, 13866.678467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23931.204224, 15355.046738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19120.901794, 15444.275635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20933.738000, 41434.460000, 2153.032062, 2153.032062, 0.000000, X, Y)
[Wed Dec 28 09:57:17 2011] Writing fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src1.gif
[Wed Dec 28 10:00:08 2011] Mean detx,y = (-25.99, -89.00) 
[Wed Dec 28 10:00:33 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 10:18:48 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 10:18:49 2011] Setting source spectrum file to fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 28 10:18:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Dec 28 12:15:44 2011] Updating aperture counts using extracted products
[Wed Dec 28 12:15:44 2011] Error reading totcts from fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 28 12:15:45 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 12:15:45 2011] Using photon index=1.80, rate=13.7, arf fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src1.arf
[Wed Dec 28 12:15:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 12:15:45 2011] Updating source flux to 1.3e-10
[Wed Dec 28 12:20:30 2011] Reading fit data from xmm0159960101/analysis//spectral/fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Dec 28 12:20:30 2011] Spectral fit parameter nH value = 1.41585e+12
[Wed Dec 28 12:20:30 2011] Spectral fit parameter PhoIndex value = 1.82872
[Wed Dec 28 12:20:30 2011] Failed to get F(0.3-8.0) from xmm0159960101/analysis//spectral/fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Dec 28 12:20:30 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 12:20:30 2011] Using Nh = 1.4e+12, photon index=1.83, rate=13.7, arf fullrun_mos2_xmm0159960101_pi300-10000_pass1_cl_src1.arf
[Wed Dec 28 12:20:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 12:20:30 2011] Updating source flux to 1.3e-10