[Thu Jan  5 11:41:40 2012] Detection parameters:
  Position = (193.9, 294.9) = 8 49 27.43 -45 37 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 494.3 +/- 56.7
  Background counts = 1347.6
  Rate = 0.01 +/- 0.001

[Thu Jan  5 11:41:43 2012] Off-axis axis estimate = 7.59'
[Thu Jan  5 12:02:58 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 12:02:58 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Thu Jan  5 12:02:58 2012] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.554
[Thu Jan  5 12:02:58 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.22"
[Thu Jan  5 18:19:53 2012] fullrun_pn_xmm0159760201_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jan  5 18:19:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0159760201_pi300-10000_cl_pass0_src13.csv
[Thu Jan  5 18:19:53 2012] fullrun_pn_xmm0159760201_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jan  5 18:19:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0159760201_pi300-10000_cl_pass0_src13.csv
[Thu Jan  5 18:19:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0159760201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0159760201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 18:19:54 2012] fullrun_pn_xmm0159760201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jan  5 18:19:54 2012] fullrun_pn_xmm0159760201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jan  5 18:19:54 2012] Fit fullrun_pn_xmm0159760201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jan  6 06:04:11 2012] Spatial fit model total counts = 6143.990000, observed total counts = 6144.000000
[Fri Jan  6 06:04:11 2012] Offset between fit and detection position for source 19 = 5.148060 pixels
[Fri Jan  6 06:04:11 2012] 6388.670000 total counts/ 5011.630000 bgd. counts: snr = 19.451677
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 5.148060 pixels
  Position = (191.5, 290.3) = 8 49 28.40 -45 37 36.7
  Extent = 11.1 (10.3-11.9)", rotation angle = 0
  Source counts = 1377.0 +/- 79.9
  Background counts = 5011.6
  Rate = 0.05 +/- 0.003
[Fri Jan  6 06:04:11 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 06:04:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 06:04:11 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 06:04:11 2012] Source does appear to be extended
[Fri Jan  6 06:04:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 06:05:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan  6 06:05:23 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Fri Jan  6 06:05:23 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.947
[Fri Jan  6 06:05:23 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.05"
[Fri Jan  6 12:06:18 2012] fullrun_pn_xmm0159760201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jan  6 12:06:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0159760201_pi300-10000_cl_pass1_src13.csv
[Fri Jan  6 12:06:18 2012] fullrun_pn_xmm0159760201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jan  6 12:06:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0159760201_pi300-10000_cl_pass1_src13.csv
[Fri Jan  6 12:06:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0159760201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0159760201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 12:06:19 2012] fullrun_pn_xmm0159760201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jan  6 12:06:19 2012] fullrun_pn_xmm0159760201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jan  6 12:06:19 2012] Fit fullrun_pn_xmm0159760201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Jan  7 01:12:32 2012] Spatial fit model total counts = 5589.020000, observed total counts = 5589.000000
[Sat Jan  7 01:12:32 2012] Offset between fit and detection position for source 19 = 4.850146 pixels
[Sat Jan  7 01:12:32 2012] 5243.980000 total counts/ 3246.640000 bgd. counts: snr = 35.053786
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 4.850146 pixels
  Position = (190.5, 295.0) = 8 49 28.83 -45 37 16.1
  Extent = 12.0 (11.3-13.2)", rotation angle = 0
  Source counts = 1997.3 +/- 72.4
  Background counts = 3246.6
  Rate = 0.07 +/- 0.002
[Sat Jan  7 01:12:32 2012] Vigneting correction estimate = 1.000000
[Sat Jan  7 01:12:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan  7 01:12:32 2012] Assessing source extent using major axis lower bound
[Sat Jan  7 01:12:32 2012] Source does appear to be extended
[Sat Jan  7 01:12:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan  7 01:12:32 2012] Source is confused with source 15
[Sat Jan  7 01:13:32 2012] Counts = 1997.340000, rescaling region sizes by 2.000000
[Sat Jan  7 01:13:32 2012] XMMSAS src. selection expression = ellipse(16524.131400, 25618.554000, 1444.596042, 1444.596042, 0.000000, X, Y)
[Sat Jan  7 01:13:32 2012] Writing source region out to fullrun_pn_xmm0159760201_pi300-10000_pass1_cl_src19_src.reg
[Sat Jan  7 01:13:32 2012] Extracting stamp from image fullrun_pn_xmm0159760201_pi300-10000_cl_sm2.00.img.gz, (107, 212) - (274, 378)
[Sat Jan  7 01:13:32 2012] XMMSAS bgd. selection expression = annulus(16524.131400, 25618.554000, 4815.320139, 9630.640277, X, Y) && !ellipse(19648.202560, 26754.304840, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(19474.980484, 27358.876251, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(14781.788742, 30387.072571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18069.572400, 35022.638000, 1671.768048, 1671.768048, 0.000000, X, Y) && !ellipse(18399.010000, 33834.942000, 1184.352034, 1184.352034, 0.000000, X, Y) && !ellipse(13005.587418, 31161.414520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13084.812164, 30731.177643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16335.992447, 28586.529938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19519.650024, 27372.403625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.387996, 26431.590848, 1407.288040, 1396.263147, 44.454500, X, Y) && !ellipse(22363.902000, 25963.998000, 2480.736071, 2480.736071, 0.000000, X, Y) && !ellipse(16096.478271, 26043.678284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22648.722000, 25801.230000, 1220.504035, 1220.504035, 0.000000, X, Y) && !ellipse(23130.352000, 25386.222000, 1240.368036, 1240.368036, 0.000000, X, Y) && !ellipse(23855.470000, 24779.390000, 2347.536068, 2347.536068, 0.000000, X, Y) && !ellipse(22734.453400, 24600.082000, 922.920027, 922.920027, 0.000000, X, Y) && !ellipse(24572.497800, 24328.775200, 1173.768034, 1173.768034, 0.000000, X, Y) && !ellipse(17833.820000, 24046.194000, 1294.488037, 789.496023, 63.643500, X, Y) && !ellipse(24335.418000, 23206.600000, 537.150415, 537.150415, 0.000000, X, Y) && !ellipse(25570.806946, 23622.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24989.384000, 23368.914000, 609.311218, 609.311218, 0.000000, X, Y) && !ellipse(26316.644501, 22962.129150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24195.570000, 23357.806000, 1234.104036, 1234.104036, 0.000000, X, Y) && !ellipse(25483.182000, 22600.224000, 1280.512037, 1280.512037, 0.000000, X, Y) && !ellipse(24500.964000, 22269.244000, 997.208029, 997.208029, 0.000000, X, Y) && !ellipse(22413.159363, 15270.057922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25007.218567, 21965.204147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25779.548004, 22138.816513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14222.261230, 20747.797546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19047.980087, 35354.990814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20720.965820, 33714.429626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18705.930000, 33389.526000, 1752.896050, 1398.488040, 50.269000, X, Y) && !ellipse(17869.771011, 28038.452240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22536.728000, 24100.040000, 1276.512037, 1276.512037, 0.000000, X, Y) && !ellipse(18134.112366, 23624.954559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14524.696945, 22196.799698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26601.871643, 21096.401566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26052.915131, 20821.015289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20444.917114, 16549.244400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19794.967270, 35914.615234, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jan  7 01:13:32 2012] Writing fullrun_pn_xmm0159760201_pi300-10000_pass1_cl_src19.gif
[Sat Jan  7 02:48:37 2012] Mean detx,y = (8072.81, 3558.63) 
[Sat Jan  7 02:48:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan  7 02:51:47 2012] Binned source spectrum to 10 counts/bin
[Sat Jan  7 02:51:47 2012] Setting source spectrum file to fullrun_pn_xmm0159760201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jan  7 02:51:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0159760201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Jan 10 10:44:51 2012] Updating aperture counts using extracted products
[Tue Jan 10 10:44:51 2012] Error reading totcts from fullrun_pn_xmm0159760201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Jan 10 10:44:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 10 10:44:52 2012] Using photon index=1.80, rate=0.0662, arf fullrun_pn_xmm0159760201_pi300-10000_pass1_cl_src19.arf
[Tue Jan 10 10:44:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 10 10:44:52 2012] Updating source flux to 2.3e-13
[Tue Jan 10 10:59:58 2012] Flag c found in src. 19 procflags, skipping spectral fitting