[Thu Jan  5 11:42:58 2012] Detection parameters:
  Position = (364.4, 199.6) = 8 48 16.65 -45 44 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.1 +/- 25.1
  Background counts = 247.3
  Rate = 0.004 +/- 0.0008

[Thu Jan  5 11:42:58 2012] Off-axis axis estimate = 8.61'
[Thu Jan  5 18:19:55 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 18:19:55 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Thu Jan  5 18:19:55 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022
[Thu Jan  5 18:19:55 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 10.74"
[Fri Jan  6 00:21:38 2012] fullrun_mos1_xmm0159760201_pi300-10000_cl_pass0_src47.ximg exists
[Fri Jan  6 00:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0159760201_pi300-10000_cl_pass0_src47.csv
[Fri Jan  6 00:21:38 2012] fullrun_mos1_xmm0159760201_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri Jan  6 00:21:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0159760201_pi300-10000_cl_pass0_src47.csv
[Fri Jan  6 00:21:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0159760201_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0159760201_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 00:21:41 2012] fullrun_mos1_xmm0159760201_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri Jan  6 00:21:41 2012] fullrun_mos1_xmm0159760201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Jan  6 00:21:41 2012] Fit fullrun_mos1_xmm0159760201_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Jan  6 06:04:32 2012] Spatial fit model total counts = 2564.970000, observed total counts = 2563.000000
[Fri Jan  6 06:04:32 2012] Offset between fit and detection position for source 53 = 5.783484 pixels
[Fri Jan  6 06:04:32 2012] 2456.839000 total counts/ 2074.150000 bgd. counts: snr = 8.402836
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 5.783484 pixels
  Position = (369.5, 196.9) = 8 48 14.53 -45 44 23.1
  Extent = 21.5 (15.7-42.9)", rotation angle = 0
  Source counts = 382.7 +/- 49.6
  Background counts = 2074.2
  Rate = 0.008 +/- 0.001
[Fri Jan  6 06:04:32 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 06:04:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 06:04:32 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 06:04:32 2012] Source does appear to be extended
[Fri Jan  6 06:04:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 06:04:32 2012] Source is confused with source 56
[Fri Jan  6 12:06:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan  6 12:06:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan  6 12:06:20 2012] Initial guess for spatial extent in simple fitting = 21.47"
[Fri Jan  6 12:06:20 2012] source mask rpix=4.9, npix_max = 118, mask sum = 121, frac = 1.024
[Fri Jan  6 12:06:20 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 21.47"
[Fri Jan  6 19:07:28 2012] fullrun_mos1_xmm0159760201_pi300-10000_cl_pass1_src44.ximg exists
[Fri Jan  6 19:07:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0159760201_pi300-10000_cl_pass1_src44.csv
[Fri Jan  6 19:07:28 2012] fullrun_mos1_xmm0159760201_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri Jan  6 19:07:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0159760201_pi300-10000_cl_pass1_src44.csv
[Fri Jan  6 19:07:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0159760201_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0159760201_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 19:07:29 2012] fullrun_mos1_xmm0159760201_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri Jan  6 19:07:29 2012] fullrun_mos1_xmm0159760201_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Jan  6 19:07:29 2012] Fit fullrun_mos1_xmm0159760201_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Sat Jan  7 01:12:49 2012] Warning, spatial fit 44 centroid is now closest to src. 59
[Sat Jan  7 01:12:49 2012] Vigneting correction estimate = 1.000000
[Sat Jan  7 01:12:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan  7 01:12:49 2012] Assessing source extent using major axis lower bound
[Sat Jan  7 01:12:49 2012] Source does appear to be extended
[Sat Jan  7 01:12:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  9 18:55:56 2012] XMMSAS src. selection expression = ellipse(32101.218000, 17083.956000, 1288.272037, 1288.272037, 0.000000, X, Y)
[Mon Jan  9 18:55:56 2012] Writing source region out to fullrun_mos1_xmm0159760201_pi300-10000_pass1_cl_src53_src.reg
[Mon Jan  9 18:55:56 2012] Extracting stamp from image fullrun_mos1_xmm0159760201_pi300-10000_cl_sm2.00.img.gz, (295, 123) - (444, 271)
[Mon Jan  9 18:55:56 2012] XMMSAS bgd. selection expression = annulus(32101.218000, 17083.956000, 2147.120062, 4294.240124, X, Y) && !ellipse(27027.408400, 22330.550400, 1031.296030, 1031.296030, 0.000000, X, Y) && !ellipse(28515.490800, 20362.087400, 733.603221, 733.603221, 0.000000, X, Y) && !ellipse(28574.084000, 19833.108000, 2967.360085, 2967.360085, 0.000000, X, Y) && !ellipse(27463.653800, 21424.238200, 1355.432039, 1355.432039, 0.000000, X, Y) && !ellipse(29583.714000, 19514.674000, 1737.208050, 1737.208050, 0.000000, X, Y) && !ellipse(30528.528000, 18077.524800, 1621.056047, 1621.056047, 0.000000, X, Y) && !ellipse(30107.440000, 18469.508000, 1032.616030, 1032.616030, 0.000000, X, Y) && !ellipse(31463.950000, 17335.993800, 1690.848049, 1052.976030, 42.964900, X, Y) && !ellipse(30986.910065, 17868.430222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25670.532000, 23494.150000, 2411.584069, 2411.584069, 0.000000, X, Y)
[Mon Jan  9 18:55:56 2012] Writing fullrun_mos1_xmm0159760201_pi300-10000_pass1_cl_src53.gif
[Mon Jan  9 19:38:24 2012] Mean detx,y = (8691.70, -5058.51) 
[Mon Jan  9 19:38:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  9 19:38:47 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  9 19:38:47 2012] Setting source spectrum file to fullrun_mos1_xmm0159760201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon Jan  9 19:38:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0159760201_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Tue Jan 10 10:44:54 2012] Updating aperture counts using extracted products
[Tue Jan 10 10:44:54 2012] Error reading totcts from fullrun_mos1_xmm0159760201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Tue Jan 10 10:44:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 10 10:44:56 2012] Using photon index=1.80, rate=0.00786, arf fullrun_mos1_xmm0159760201_pi300-10000_pass1_cl_src53.arf
[Tue Jan 10 10:44:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 10 10:44:56 2012] Updating source flux to 1.2e-13
[Tue Jan 10 10:45:00 2012] Flag c found in src. 53 procflags, skipping spectral fitting