[Thu Mar  8 00:51:36 2012] Detection parameters:
  Position = (284.7, 356.0) = 8 48 58.96 -45 37 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 308.0 +/- 37.7
  Background counts = 470.7
  Rate = 0.02 +/- 0.002

[Thu Mar  8 00:51:38 2012] Off-axis axis estimate = 4.29'
[Thu Mar  8 00:56:26 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 00:56:26 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Thu Mar  8 00:56:26 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.024
[Thu Mar  8 00:56:26 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.57"
[Thu Mar  8 05:07:53 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Mar  8 05:07:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src7.csv
[Thu Mar  8 05:07:53 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Mar  8 05:07:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src7.csv
[Thu Mar  8 05:07:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 05:07:54 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Mar  8 05:07:54 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Mar  8 05:07:54 2012] Fit fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Mar  8 12:07:38 2012] Warning, spatial fit 7 centroid is now closest to src. 41
[Thu Mar  8 12:07:38 2012] Spatial fit model total counts = 6735.740000, observed total counts = 6284.000000
[Thu Mar  8 12:07:38 2012] Offset between fit and detection position for source 7 = 0.123685 pixels
[Thu Mar  8 12:07:38 2012] Warning, changing simple spatial fit ID from 7 to 41
[Thu Mar  8 12:07:38 2012] 6552.075000 total counts/ 5840.590000 bgd. counts: snr = 9.309736
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.123685 pixels
  Position = (284.8, 356.0) = 8 48 58.92 -45 37 11.8
  Extent = 16.6 (16.6-33.2)", rotation angle = 0
  Source counts = 711.5 +/- 80.9
  Background counts = 5840.6
  Rate = 0.04 +/- 0.005
[Thu Mar  8 12:07:38 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 12:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 12:07:38 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 12:07:38 2012] Source does appear to be extended
[Thu Mar  8 12:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 12:07:38 2012] Source is confused with source 39
[Thu Mar  8 12:07:38 2012] Source is confused with source 41
[Thu Mar  8 12:08:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar  8 12:08:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 12:08:34 2012] Initial guess for spatial extent in simple fitting = 16.62"
[Thu Mar  8 12:08:34 2012] source mask rpix=3.8, npix_max = 74, mask sum = 72, frac = 0.964
[Thu Mar  8 12:08:34 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 16.62"
[Fri Mar  9 08:03:33 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Mar  9 08:03:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_src7.csv
[Fri Mar  9 08:03:33 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Mar  9 08:03:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_src7.csv
[Fri Mar  9 08:03:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 08:03:35 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Mar  9 08:03:35 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Mar  9 08:03:35 2012] Fit fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Mar  9 16:17:50 2012] Warning, spatial fit 7 centroid is now closest to src. 9
[Fri Mar  9 16:17:50 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 16:17:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 16:17:50 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 16:17:50 2012] Source does appear to be extended
[Fri Mar  9 16:17:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 16:18:45 2012] XMMSAS src. selection expression = ellipse(24728.454000, 30926.462000, 997.290029, 997.290029, 0.000000, X, Y)
[Fri Mar  9 16:18:45 2012] Writing source region out to fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src7_src.reg
[Fri Mar  9 16:18:45 2012] Extracting stamp from image fullrun_pn_xmm0159760101_pi300-10000_cl_sm2.00.img.gz, (227, 299) - (342, 413)
[Fri Mar  9 16:18:45 2012] XMMSAS bgd. selection expression = annulus(24728.454000, 30926.462000, 1662.150048, 3324.300096, X, Y) && !ellipse(20740.861282, 32587.425446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26174.887177, 29760.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25174.626000, 30214.542000, 2659.440077, 2659.440077, 0.000000, X, Y) && !ellipse(25886.797913, 29261.289703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26362.648000, 28299.956000, 2391.872069, 2391.872069, 0.000000, X, Y) && !ellipse(27016.128000, 28156.299600, 1036.512030, 1036.512030, 0.000000, X, Y) && !ellipse(27715.254000, 27249.420000, 1189.840034, 1189.840034, 0.000000, X, Y) && !ellipse(28131.222000, 27254.297600, 1186.104034, 1186.104034, 0.000000, X, Y) && !ellipse(21011.098129, 33077.918213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23012.950120, 32322.967400, 1494.040043, 373.512811, 37.767000, X, Y) && !ellipse(21630.412918, 32413.340485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23531.408000, 31770.400000, 2817.616081, 1787.184051, 228.266000, X, Y) && !ellipse(22834.338800, 32184.904000, 1483.040043, 1483.040043, 0.000000, X, Y) && !ellipse(22071.076096, 31875.142151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22812.310000, 31342.839000, 1414.048041, 1414.048041, 0.000000, X, Y) && !ellipse(24109.410000, 31336.194000, 2743.296079, 1905.552055, 41.017000, X, Y) && !ellipse(24997.588000, 30601.684000, 1371.648039, 1371.648039, 0.000000, X, Y) && !ellipse(26579.774000, 29536.686560, 1138.480033, 1138.480033, 0.000000, X, Y) && !ellipse(26996.158000, 29054.236000, 2276.960066, 2276.960066, 0.000000, X, Y) && !ellipse(25111.776276, 28286.806335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28344.346000, 28342.510000, 1196.064034, 1196.064034, 0.000000, X, Y) && !ellipse(27651.139221, 27868.267517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27144.416000, 27086.322000, 1142.472033, 1142.472033, 0.000000, X, Y) && !ellipse(28825.689000, 27639.900000, 1250.576036, 1250.576036, 0.000000, X, Y) && !ellipse(28996.848000, 26758.844000, 2372.208068, 2372.208068, 0.000000, X, Y) && !ellipse(30051.064000, 25951.338000, 2605.104075, 1090.120031, 46.439000, X, Y) && !ellipse(29202.450000, 26556.416000, 1593.512046, 1593.512046, 0.000000, X, Y)
[Fri Mar  9 16:18:45 2012] Writing fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src7.gif
[Fri Mar  9 16:25:03 2012] Mean detx,y = (1999.96, -2546.62) 
[Fri Mar  9 16:25:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 16:25:37 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 16:25:38 2012] Setting source spectrum file to fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Mar  9 16:25:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Mar 13 15:35:42 2012] Updating aperture counts using extracted products
[Tue Mar 13 15:35:42 2012] Error reading totcts from fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Mar 13 15:35:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 15:35:46 2012] Using photon index=1.80, rate=0.0415, arf fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src7.arf
[Tue Mar 13 15:35:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 15:35:46 2012] Updating source flux to 1.2e-13
[Tue Mar 13 15:52:40 2012] Flag c found in src. 7 procflags, skipping spectral fitting