[Thu Mar 8 00:51:38 2012] Detection parameters: Position = (334.9, 304.9) = 8 48 38.14 -45 40 54.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 263.3 +/- 34.1 Background counts = 385.0 Rate = 0.02 +/- 0.002 [Thu Mar 8 00:51:38 2012] Off-axis axis estimate = 2.68' [Thu Mar 8 00:56:26 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting [Thu Mar 8 00:56:26 2012] Initial guess for spatial extent in simple fitting = 7.77" [Thu Mar 8 00:56:26 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.765 [Thu Mar 8 00:56:26 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 7.77" [Thu Mar 8 05:07:54 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src53.ximg exists [Thu Mar 8 05:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src53.csv [Thu Mar 8 05:07:54 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src53_1.ximg exists [Thu Mar 8 05:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src53.csv [Thu Mar 8 05:07:54 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src53_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Mar 8 05:07:55 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists [Thu Mar 8 05:07:55 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists [Thu Mar 8 05:07:55 2012] Fit fullrun_pn_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly [Thu Mar 8 12:07:38 2012] Source 53 is offset by -3.592335 and -3.794090 pixels which is larger than 2 X fitted extent = 3.246386 x 7.381609, not incorporating fit results [Thu Mar 8 12:07:38 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 10.633599 pixels away [Thu Mar 8 12:07:38 2012] Source 53 is offset by 3.096240 and 2.901600 pixels which is larger than 2 X fitted extent = 0.855306 x 0.855306, not incorporating fit results [Thu Mar 8 12:07:38 2012] Vigneting correction estimate = 1.000000 [Thu Mar 8 12:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Mar 8 12:07:38 2012] Assessing source extent using major [Thu Mar 8 12:07:38 2012] Source does appear to be extended [Thu Mar 8 12:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Mar 8 12:07:38 2012] Source is confused with source 17 [Thu Mar 8 12:08:34 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting [Thu Mar 8 12:08:34 2012] Initial guess for spatial extent in simple fitting = 7.77" [Thu Mar 8 12:08:34 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.765 [Thu Mar 8 12:08:34 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 7.77" [Fri Mar 9 08:03:34 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_src47.ximg exists [Fri Mar 9 08:03:34 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_src47_1.ximg exists [Fri Mar 9 08:03:34 2012] Fit fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_src47 appears to have run properly [Fri Mar 9 08:03:36 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists [Fri Mar 9 08:03:36 2012] fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists [Fri Mar 9 08:03:36 2012] Fit fullrun_pn_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly [Fri Mar 9 16:17:50 2012] Spatial fit model total counts = 17749.500000, observed total counts = 17726.000000 [Fri Mar 9 16:17:50 2012] Offset between fit and detection position for source 53 = 3.407589 pixels [Fri Mar 9 16:17:50 2012] Warning, changing simple spatial fit ID from 47 to 17 [Fri Mar 9 16:17:50 2012] 17312.840000 total counts/ 15912.900000 bgd. counts: snr = 11.097745 Spatial fit parameters: Offset between fit and detection position for source 53 = 3.407589 pixels Position = (333.9, 308.1) = 8 48 38.56 -45 40 40.2 Extent = 29.7 (29.6-59.3)", rotation angle = 0 Source counts = 1399.9 +/- 131.6 Background counts = 15912.9 Rate = 0.08 +/- 0.008 [Fri Mar 9 16:17:51 2012] Vigneting correction estimate = 1.000000 [Fri Mar 9 16:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Mar 9 16:17:51 2012] Assessing source extent using major axis lower bound [Fri Mar 9 16:17:51 2012] Source does appear to be extended [Fri Mar 9 16:17:51 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Mar 9 16:18:48 2012] Counts = 1399.940000, rescaling region sizes by 2.000000 [Fri Mar 9 16:18:48 2012] XMMSAS src. selection expression = ellipse(28996.848000, 26758.844000, 3558.312102, 3558.312102, 0.000000, X, Y) [Fri Mar 9 16:18:48 2012] Writing source region out to fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src53_src.reg [Fri Mar 9 16:18:48 2012] Extracting stamp from image fullrun_pn_xmm0159760101_pi300-10000_cl_sm2.00.img.gz, (129, 104) - (538, 513) [Fri Mar 9 16:18:48 2012] XMMSAS bgd. selection expression = annulus(28996.848000, 26758.844000, 11861.040341, 23722.080683, X, Y) && !ellipse(18700.557556, 30578.670105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11368.087479, 25515.924835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16563.865646, 35273.104401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19689.772354, 33405.639099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20740.861282, 32587.425446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19448.069440, 31554.312000, 372.876811, 372.876811, 0.000000, X, Y) && !ellipse(24728.454000, 30926.462000, 1329.720038, 1329.720038, 0.000000, X, Y) && !ellipse(26174.887177, 29760.841431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25174.626000, 30214.542000, 2659.440077, 2659.440077, 0.000000, X, Y) && !ellipse(25886.797913, 29261.289703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26362.648000, 28299.956000, 2391.872069, 2391.872069, 0.000000, X, Y) && !ellipse(27016.128000, 28156.299600, 1036.512030, 1036.512030, 0.000000, X, Y) && !ellipse(27715.254000, 27249.420000, 1189.840034, 1189.840034, 0.000000, X, Y) && !ellipse(28131.222000, 27254.297600, 1186.104034, 1186.104034, 0.000000, X, Y) && !ellipse(30443.808000, 25428.818000, 1362.912039, 1362.912039, 0.000000, X, Y) && !ellipse(25838.072815, 22839.461487, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(12619.198349, 37437.781647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21011.098129, 33077.918213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20443.414368, 33015.931244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24336.401800, 20416.274600, 487.549614, 487.549614, 0.000000, X, Y) && !ellipse(23012.950120, 32322.967400, 1494.040043, 373.512811, 37.767000, X, Y) && !ellipse(21630.412918, 32413.340485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23531.408000, 31770.400000, 2817.616081, 1787.184051, 228.266000, X, Y) && !ellipse(22834.338800, 32184.904000, 1483.040043, 1483.040043, 0.000000, X, Y) && !ellipse(22071.076096, 31875.142151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22812.310000, 31342.839000, 1414.048041, 1414.048041, 0.000000, X, Y) && !ellipse(30931.150200, 31386.363000, 1516.560044, 1516.560044, 0.000000, X, Y) && !ellipse(24109.410000, 31336.194000, 2743.296079, 1905.552055, 41.017000, X, Y) && !ellipse(18506.825378, 31092.920074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24997.588000, 30601.684000, 1371.648039, 1371.648039, 0.000000, X, Y) && !ellipse(26579.774000, 29536.686560, 1138.480033, 1138.480033, 0.000000, X, Y) && !ellipse(26996.158000, 29054.236000, 2276.960066, 2276.960066, 0.000000, X, Y) && !ellipse(25111.776276, 28286.806335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28344.346000, 28342.510000, 1196.064034, 1196.064034, 0.000000, X, Y) && !ellipse(27651.139221, 27868.267517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27144.416000, 27086.322000, 1142.472033, 1142.472033, 0.000000, X, Y) && !ellipse(28825.689000, 27639.900000, 1250.576036, 1250.576036, 0.000000, X, Y) && !ellipse(29694.148000, 26436.898000, 1040.192030, 645.533619, 41.624100, X, Y) && !ellipse(27658.960938, 26673.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28333.784424, 26156.251526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27767.466675, 26064.143250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30051.064000, 25951.338000, 2605.104075, 1090.120031, 46.439000, X, Y) && !ellipse(29202.450000, 26556.416000, 1593.512046, 1593.512046, 0.000000, X, Y) && !ellipse(28705.976000, 25255.290000, 1244.416036, 1244.416036, 0.000000, X, Y) && !ellipse(31131.670000, 24578.368000, 2724.768078, 2724.768078, 0.000000, X, Y) && !ellipse(30935.800000, 24988.104000, 1399.872040, 1399.872040, 0.000000, X, Y) && !ellipse(29784.649078, 24946.723724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32781.672000, 23156.336000, 1499.080043, 1499.080043, 0.000000, X, Y) && !ellipse(33566.786000, 22383.676000, 2998.160086, 2998.160086, 0.000000, X, Y) && !ellipse(29838.928400, 37546.799400, 1018.064029, 1018.064029, 0.000000, X, Y) [Fri Mar 9 16:18:48 2012] Writing fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src53.gif [Fri Mar 9 18:20:44 2012] Mean detx,y = (1151.60, 2995.43) [Fri Mar 9 18:20:55 2012] Setting backscal keywords in source and bgd. spectrum [Fri Mar 9 18:37:08 2012] Binned source spectrum to 10 counts/bin [Fri Mar 9 18:37:08 2012] Setting source spectrum file to fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src53_src_b10.pi.gz [Fri Mar 9 18:37:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src53_bgd.pi.gz [Tue Mar 13 15:35:44 2012] Updating aperture counts using extracted products [Tue Mar 13 15:35:44 2012] Error reading totcts from fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src53_src_b10.pi.gz [Tue Mar 13 15:35:48 2012] Calculating source flux in energy range 0.30-8.00 [Tue Mar 13 15:35:48 2012] Using photon index=1.80, rate=0.0816, arf fullrun_pn_xmm0159760101_pi300-10000_pass1_cl_src53.arf [Tue Mar 13 15:35:48 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Mar 13 15:35:48 2012] Updating source flux to 1.9e-13 [Tue Mar 13 15:52:40 2012] Flag b found in src. 53 procflags, skipping spectral fitting [Tue Mar 13 15:52:40 2012] Flag c found in src. 53 procflags, skipping spectral fitting