[Thu Mar  8 00:52:11 2012] Detection parameters:
  Position = (331.3, 318.0) = 8 48 39.61 -45 39 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.6 +/- 19.7
  Background counts = 110.6
  Rate = 0.005 +/- 0.001

[Thu Mar  8 00:52:11 2012] Off-axis axis estimate = 2.77'
[Thu Mar  8 05:07:56 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 05:07:56 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Thu Mar  8 05:07:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948
[Thu Mar  8 05:07:56 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.82"
[Thu Mar  8 08:17:34 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src37.ximg exists
[Thu Mar  8 08:17:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src37.csv
[Thu Mar  8 08:17:34 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu Mar  8 08:17:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src37.csv
[Thu Mar  8 08:17:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 08:17:35 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu Mar  8 08:17:35 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Mar  8 08:17:35 2012] Fit fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu Mar  8 12:07:56 2012] Source 39 is offset by 0.126548 and -2.532318 pixels which is larger than
2 X fitted extent = 0.894639 x 0.894639, not incorporating fit results
[Thu Mar  8 12:07:56 2012] Source 39 is offset by 0.051443 and -2.561773 pixels which is larger than
2 X fitted extent = 0.898354 x 0.898354, not incorporating fit results
[Thu Mar  8 12:07:56 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 12:07:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 12:07:56 2012] Assessing source extent using major
[Thu Mar  8 12:07:56 2012] Source does appear to be extended
[Thu Mar  8 12:07:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 12:07:56 2012] Source is confused with source 21
[Fri Mar  9 08:03:36 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 08:03:36 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Fri Mar  9 08:03:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948
[Fri Mar  9 08:03:36 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 7.82"
[Fri Mar  9 11:25:52 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_src32.ximg exists
[Fri Mar  9 11:25:52 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri Mar  9 11:25:52 2012] Fit fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_src32 appears to have run properly
[Fri Mar  9 11:25:54 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri Mar  9 11:25:54 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri Mar  9 11:25:54 2012] Fit fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Fri Mar  9 16:18:06 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 15.720397 pixels away
[Fri Mar  9 16:18:06 2012] Source 39 is offset by 0.099714 and -2.513716 pixels which is larger than
2 X fitted extent = 0.898354 x 0.898354, not incorporating fit results
[Fri Mar  9 16:18:06 2012] Source 39 is offset by 1.661330 and -6.346663 pixels which is larger than
2 X fitted extent = 1.584391 x 1.584391, not incorporating fit results
[Fri Mar  9 16:18:06 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 16:18:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 16:18:06 2012] Assessing source extent using major
[Fri Mar  9 16:18:06 2012] Source does appear to be extended
[Fri Mar  9 16:18:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:22:42 2012] XMMSAS src. selection expression = ellipse(28777.771698, 27615.604309, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 02:22:42 2012] Writing source region out to fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src39_src.reg
[Tue Mar 13 02:22:42 2012] Extracting stamp from image fullrun_mos1_xmm0159760101_pi300-10000_cl_sm2.00.img.gz, (294, 280) - (369, 355)
[Tue Mar 13 02:22:42 2012] XMMSAS bgd. selection expression = annulus(28777.771698, 27615.604309, 1087.500000, 2175.000000, X, Y) && !ellipse(25708.964000, 30152.116000, 1345.416039, 1345.416039, 0.000000, X, Y) && !ellipse(26509.026000, 28135.048000, 1172.368034, 1172.368034, 0.000000, X, Y) && !ellipse(26219.678000, 28454.718000, 1211.464035, 1211.464035, 0.000000, X, Y) && !ellipse(30828.598633, 24916.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29854.976600, 26234.969400, 1288.368037, 1288.368037, 0.000000, X, Y) && !ellipse(26467.975861, 28831.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24914.656949, 30511.405815, 2683.872077, 1946.516580, 30.733783, X, Y) && !ellipse(30480.673600, 25431.449600, 592.556017, 592.556017, 0.000000, X, Y) && !ellipse(29275.393200, 26978.304200, 1257.664036, 452.914413, 52.363000, X, Y) && !ellipse(28266.442261, 27104.874908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28272.847000, 28309.682300, 1245.336036, 537.916015, 339.308100, X, Y) && !ellipse(27597.514800, 27298.282000, 1184.488034, 1184.488034, 0.000000, X, Y) && !ellipse(27049.010437, 28827.678284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27873.922729, 28675.056580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27127.105469, 27710.534882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28077.096191, 26578.013550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32637.880400, 23018.494000, 3029.536087, 1173.616034, 42.827000, X, Y) && !ellipse(28722.231140, 26411.561798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.768890, 25899.786316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29428.344147, 25269.777069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29951.183136, 25204.049164, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 02:22:42 2012] Writing fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src39.gif
[Tue Mar 13 03:02:57 2012] Mean detx,y = (-2576.34, 1710.39) 
[Tue Mar 13 03:02:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 03:03:27 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 03:03:28 2012] Setting source spectrum file to fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue Mar 13 03:03:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Tue Mar 13 05:19:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 05:19:17 2012] rmf not generated due to insufficient counts
[Tue Mar 13 15:35:51 2012] Updating aperture counts using extracted products
[Tue Mar 13 15:35:51 2012] Error reading totcts from fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue Mar 13 15:35:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 15:35:53 2012] Using photon index=1.80, rate=0.00537, arf fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src39.arf
[Tue Mar 13 15:35:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 15:35:53 2012] Updating source flux to 5.6e-14
[Tue Mar 13 15:36:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting