[Thu Mar  8 00:52:10 2012] Detection parameters:
  Position = (354.9, 287.0) = 8 48 29.81 -45 42 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.5 +/- 19.2
  Background counts = 88.8
  Rate = 0.01 +/- 0.001

[Thu Mar  8 00:52:11 2012] Off-axis axis estimate = 4.18'
[Thu Mar  8 05:07:56 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 05:07:56 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Thu Mar  8 05:07:56 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.662
[Thu Mar  8 05:07:56 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.52"
[Thu Mar  8 08:17:33 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Mar  8 08:17:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src5.csv
[Thu Mar  8 08:17:33 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Mar  8 08:17:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src5.csv
[Thu Mar  8 08:17:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 08:17:34 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Mar  8 08:17:34 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Mar  8 08:17:34 2012] Fit fullrun_mos1_xmm0159760101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Mar  8 12:07:55 2012] Warning, spatial fit 5 centroid is now closest to src. 22
[Thu Mar  8 12:07:56 2012] Source 24 is offset by 3.047203 and -5.088019 pixels which is larger than
2 X fitted extent = 4.101678 x 4.101678, not incorporating fit results
[Thu Mar  8 12:07:56 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 12:07:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 12:07:56 2012] Assessing source extent using major
[Thu Mar  8 12:07:56 2012] Source does appear to be extended
[Thu Mar  8 12:07:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 12:07:56 2012] Source is confused with source 22
[Fri Mar  9 08:03:36 2012] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 08:03:36 2012] Initial guess for spatial extent in simple fitting = 8.52"
[Fri Mar  9 08:03:36 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.662
[Fri Mar  9 08:03:36 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.52"
[Fri Mar  9 11:25:52 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Mar  9 11:25:52 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Mar  9 11:25:52 2012] Fit fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Mar  9 11:25:53 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Mar  9 11:25:53 2012] fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Mar  9 11:25:53 2012] Fit fullrun_mos1_xmm0159760101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Mar  9 16:18:06 2012] Warning, spatial fit 4 centroid is now closest to src. 22
[Fri Mar  9 16:18:06 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 16:18:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 16:18:06 2012] Assessing source extent using major
[Fri Mar  9 16:18:06 2012] Source does appear to be extended
[Fri Mar  9 16:18:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 02:22:41 2012] XMMSAS src. selection expression = ellipse(30828.598633, 24916.947571, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 02:22:41 2012] Writing source region out to fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src24_src.reg
[Tue Mar 13 02:22:41 2012] Extracting stamp from image fullrun_mos1_xmm0159760101_pi300-10000_cl_sm2.00.img.gz, (317, 249) - (392, 324)
[Tue Mar 13 02:22:41 2012] XMMSAS bgd. selection expression = annulus(30828.598633, 24916.947571, 1087.500000, 2175.000000, X, Y) && !ellipse(29854.976600, 26234.969400, 1288.368037, 1288.368037, 0.000000, X, Y) && !ellipse(30480.673600, 25431.449600, 592.556017, 592.556017, 0.000000, X, Y) && !ellipse(29275.393200, 26978.304200, 1257.664036, 452.914413, 52.363000, X, Y) && !ellipse(28266.442261, 27104.874908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28272.847000, 28309.682300, 1245.336036, 537.916015, 339.308100, X, Y) && !ellipse(27597.514800, 27298.282000, 1184.488034, 1184.488034, 0.000000, X, Y) && !ellipse(31853.291260, 24045.001434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28077.096191, 26578.013550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32815.032000, 22649.866000, 1514.768044, 1514.768044, 0.000000, X, Y) && !ellipse(28777.771698, 27615.604309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32637.880400, 23018.494000, 3029.536087, 1173.616034, 42.827000, X, Y) && !ellipse(28722.231140, 26411.561798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.768890, 25899.786316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29428.344147, 25269.777069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29951.183136, 25204.049164, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 02:22:41 2012] Writing fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src24.gif
[Tue Mar 13 02:24:51 2012] Mean detx,y = (-5842.74, 933.33) 
[Tue Mar 13 02:24:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 02:25:25 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 02:25:25 2012] Setting source spectrum file to fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Mar 13 02:25:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue Mar 13 03:45:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 03:45:07 2012] rmf not generated due to insufficient counts
[Tue Mar 13 15:35:49 2012] Updating aperture counts using extracted products
[Tue Mar 13 15:35:49 2012] Error reading totcts from fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Mar 13 15:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 15:35:52 2012] Using photon index=1.80, rate=0.0101, arf fullrun_mos1_xmm0159760101_pi300-10000_pass1_cl_src24.arf
[Tue Mar 13 15:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 15:35:52 2012] Updating source flux to 1.3e-13
[Tue Mar 13 15:36:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting