[Fri Jul  6 21:56:11 2012] Detection parameters:
  Position = (326.8, 307.0) = 21 58 48.79 -30 13 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2102.0 +/- 81.5
  Background counts = 79.9
  Rate = 0.05 +/- 0.002

[Fri Jul  6 21:56:11 2012] Off-axis axis estimate = 2.15'
[Fri Jul  6 23:05:42 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 23:05:42 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Fri Jul  6 23:05:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.556
[Fri Jul  6 23:05:42 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.50"
[Sat Jul  7 00:57:28 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jul  7 00:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src3.csv
[Sat Jul  7 00:57:28 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jul  7 00:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src3.csv
[Sat Jul  7 00:57:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 00:57:28 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jul  7 00:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jul  7 00:57:28 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jul  7 00:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jul  7 00:57:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 00:57:34 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Sat Jul  7 00:57:34 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 00:57:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 00:57:34 2012] Assessing source extent using major
[Sat Jul  7 00:57:34 2012] Source does appear to be extended
[Sat Jul  7 00:57:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 00:57:34 2012] Source is confused with source 3
[Sat Jul  7 02:31:48 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 02:31:48 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Sat Jul  7 02:31:48 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.556
[Sat Jul  7 02:31:48 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.50"
[Sat Jul  7 03:12:04 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jul  7 03:12:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src3.csv
[Sat Jul  7 03:12:04 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jul  7 03:12:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src3.csv
[Sat Jul  7 03:12:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 03:12:04 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jul  7 03:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jul  7 03:12:04 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jul  7 03:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sat Jul  7 03:12:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 03:12:07 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.053864 pixels away
[Sat Jul  7 03:12:07 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 03:12:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 03:12:07 2012] Assessing source extent using major
[Sat Jul  7 03:12:07 2012] Source does appear to be extended
[Sat Jul  7 03:12:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 10:16:43 2012] Counts = 2102.026123, rescaling region sizes by 2.000000
[Sat Jul  7 10:16:43 2012] XMMSAS src. selection expression = ellipse(28380.220886, 26660.107056, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jul  7 10:16:43 2012] Writing source region out to fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul  7 10:16:43 2012] Extracting stamp from image fullrun_mos2_xmm0158961301_pi300-10000_cl_sm2.00.img.gz, (252, 232) - (402, 382)
[Sat Jul  7 10:16:43 2012] XMMSAS bgd. selection expression = annulus(28380.220886, 26660.107056, 4350.000000, 8700.000000, X, Y) && !ellipse(27552.069400, 27006.692800, 1762.632051, 1762.632051, 0.000000, X, Y) && !ellipse(28422.696045, 27169.269989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35197.266300, 27301.591000, 507.660015, 507.660015, 0.000000, X, Y) && !ellipse(30748.250000, 38116.670000, 3920.000113, 490.000014, 105.319600, X, Y)
[Sat Jul  7 10:16:43 2012] Writing fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src2.gif
[Sat Jul  7 10:26:08 2012] Mean detx,y = (-115.80, -137.06) 
[Sat Jul  7 10:26:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul  7 10:28:54 2012] Binned source spectrum to 10 counts/bin
[Sat Jul  7 10:28:54 2012] Setting source spectrum file to fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul  7 10:28:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul  7 11:02:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul  7 11:02:00 2012] rmf not generated due to insufficient counts
[Sat Jul  7 12:00:27 2012] Updating aperture counts using extracted products
[Sat Jul  7 12:00:27 2012] Error reading totcts from fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul  7 12:00:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul  7 12:00:27 2012] Using photon index=1.80, rate=0.0472, arf fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src2.arf
[Sat Jul  7 12:00:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  7 12:00:27 2012] Updating source flux to 5.9e-13
[Sat Jul  7 12:00:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting