[Fri Jul  6 21:56:11 2012] Detection parameters:
  Position = (317.4, 311.0) = 21 58 51.93 -30 13 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1014489.1 +/- 1131.2
  Background counts = 80.8
  Rate = 2e+01 +/- 0.02

[Fri Jul  6 21:56:11 2012] Off-axis axis estimate = 1.65'
[Fri Jul  6 23:05:42 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 23:05:42 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Jul  6 23:05:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Fri Jul  6 23:05:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sat Jul  7 00:57:28 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul  7 00:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 00:57:28 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul  7 00:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 00:57:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 00:57:28 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul  7 00:57:28 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul  7 00:57:28 2012] Fit fullrun_mos2_xmm0158961301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul  7 00:57:34 2012] Spatial fit model total counts = 908858.000000, observed total counts = 877055.000000
[Sat Jul  7 00:57:34 2012] Offset between fit and detection position for source 1 = 0.145867 pixels
[Sat Jul  7 00:57:34 2012] 821173.000000 total counts/ 25600.000000 bgd. counts: snr = 4972.331250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.145867 pixels
  Position = (317.3, 311.0) = 21 58 51.98 -30 13 32.4
  Extent = 7.4 (7.4-7.4)", rotation angle = 0
  Source counts = 795573.0 +/- 906.2
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Sat Jul  7 00:57:34 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 00:57:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 00:57:34 2012] Assessing source extent using major axis lower bound
[Sat Jul  7 00:57:34 2012] Source does appear to be extended
[Sat Jul  7 00:57:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 02:31:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul  7 02:31:48 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Jul  7 02:31:48 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.833
[Sat Jul  7 02:31:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.36"
[Sat Jul  7 03:12:04 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul  7 03:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src1.csv
[Sat Jul  7 03:12:04 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul  7 03:12:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src1.csv
[Sat Jul  7 03:12:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 03:12:04 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul  7 03:12:04 2012] fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul  7 03:12:04 2012] Fit fullrun_mos2_xmm0158961301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul  7 03:12:07 2012] Spatial fit model total counts = 907393.000000, observed total counts = 877055.000000
[Sat Jul  7 03:12:07 2012] Offset between fit and detection position for source 1 = 0.019102 pixels
[Sat Jul  7 03:12:07 2012] 820468.000000 total counts/ 25600.000000 bgd. counts: snr = 4967.925000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019102 pixels
  Position = (317.2, 311.0) = 21 58 51.99 -30 13 32.3
  Extent = 7.3 (7.3-7.3)", rotation angle = 0
  Source counts = 794868.0 +/- 905.8
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Sat Jul  7 03:12:07 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 03:12:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 03:12:07 2012] Assessing source extent using major axis lower bound
[Sat Jul  7 03:12:07 2012] Source does appear to be extended
[Sat Jul  7 03:12:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 10:16:43 2012] Counts = 794868.000000, rescaling region sizes by 3.000000
[Sat Jul  7 10:16:43 2012] XMMSAS src. selection expression = ellipse(27552.069400, 27006.692800, 1321.974038, 1321.974038, 0.000000, X, Y)
[Sat Jul  7 10:16:43 2012] Writing source region out to fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul  7 10:16:43 2012] Extracting stamp from image fullrun_mos2_xmm0158961301_pi300-10000_cl_sm2.00.img.gz, (241, 235) - (393, 387)
[Sat Jul  7 10:16:43 2012] XMMSAS bgd. selection expression = annulus(27552.069400, 27006.692800, 6609.870190, 13219.740380, X, Y) && !ellipse(28422.696045, 27169.269989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28380.220886, 26660.107056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25138.786858, 16828.203904, 561.760558, 359.108783, -0.000000, X, Y) && !ellipse(35197.266300, 27301.591000, 507.660015, 507.660015, 0.000000, X, Y) && !ellipse(31612.321400, 41141.194400, 3178.544091, 397.317611, 287.434000, X, Y) && !ellipse(30460.250000, 37869.158000, 1923.104055, 1923.104055, 0.000000, X, Y) && !ellipse(30748.250000, 38116.670000, 3920.000113, 490.000014, 105.319600, X, Y)
[Sat Jul  7 10:16:43 2012] Writing fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src1.gif
[Sat Jul  7 10:17:30 2012] Mean detx,y = (-67.88, -130.37) 
[Sat Jul  7 10:17:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul  7 10:22:04 2012] Binned source spectrum to 10 counts/bin
[Sat Jul  7 10:22:04 2012] Setting source spectrum file to fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul  7 10:22:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul  7 12:00:26 2012] Updating aperture counts using extracted products
[Sat Jul  7 12:00:26 2012] Error reading totcts from fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul  7 12:00:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul  7 12:00:27 2012] Using photon index=1.80, rate=14.1, arf fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src1.arf
[Sat Jul  7 12:00:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  7 12:00:27 2012] Updating source flux to 1.4e-10
[Sat Jul  7 12:01:49 2012] Reading fit data from xmm0158961301/analysis//spectral/fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul  7 12:01:49 2012] Spectral fit parameter nH value = 2.20979e+20
[Sat Jul  7 12:01:49 2012] Spectral fit parameter PhoIndex value = 2.61797
[Sat Jul  7 12:01:49 2012] Failed to get F(0.3-8.0) from xmm0158961301/analysis//spectral/fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul  7 12:01:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul  7 12:01:49 2012] Using Nh = 2.2e+20, photon index=2.62, rate=14.1, arf fullrun_mos2_xmm0158961301_pi300-10000_pass1_cl_src1.arf
[Sat Jul  7 12:01:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  7 12:01:49 2012] Updating source flux to 1.1e-10