[Tue May 21 17:23:22 2013] Detection parameters:
  Position = (270.2, 291.9) = 21 58 55.05 -30 13 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1195.8 +/- 57.0
  Background counts = 103.5
  Rate = 0.06 +/- 0.003

[Tue May 21 17:23:22 2013] Off-axis axis estimate = 2.10'
[Wed May 22 08:52:37 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed May 22 08:52:37 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Wed May 22 08:52:37 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.660
[Wed May 22 08:52:37 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.48"
[Wed May 22 10:11:49 2013] fullrun_mos2_xmm0158961101_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 22 10:11:49 2013] fullrun_mos2_xmm0158961101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 22 10:11:49 2013] Fit fullrun_mos2_xmm0158961101_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed May 22 10:11:49 2013] fullrun_mos2_xmm0158961101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 22 10:11:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 22 10:11:49 2013] fullrun_mos2_xmm0158961101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 22 10:11:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 22 10:11:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0158961101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0158961101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:11:56 2013] Warning, spatial fit 3 centroid is now closest to src. 5
[Wed May 22 10:11:56 2013] Source 3 is offset by 3.983891 and -2.076345 pixels which is larger than
2 X fitted extent = 1.142791 x 1.711301, not incorporating fit results
[Wed May 22 10:11:56 2013] Vigneting correction estimate = 1.000000
[Wed May 22 10:11:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 10:11:56 2013] Assessing source extent using major
[Wed May 22 10:11:56 2013] Source does appear to be extended
[Wed May 22 10:11:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 10:11:56 2013] Source is confused with source 6
[Wed May 22 11:57:21 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed May 22 11:57:21 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Wed May 22 11:57:21 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.660
[Wed May 22 11:57:21 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.48"
[Wed May 22 13:13:41 2013] fullrun_mos2_xmm0158961101_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 22 13:13:41 2013] fullrun_mos2_xmm0158961101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 22 13:13:41 2013] Fit fullrun_mos2_xmm0158961101_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed May 22 13:13:41 2013] fullrun_mos2_xmm0158961101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 22 13:13:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 22 13:13:41 2013] fullrun_mos2_xmm0158961101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 22 13:13:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158961101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 22 13:13:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0158961101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0158961101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 13:13:48 2013] Warning, spatial fit 3 centroid is now closest to src. 5
[Wed May 22 13:13:48 2013] Vigneting correction estimate = 1.000000
[Wed May 22 13:13:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 13:13:48 2013] Assessing source extent using major
[Wed May 22 13:13:48 2013] Source does appear to be extended
[Wed May 22 13:13:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 15:04:01 2013] Counts = 1195.778809, rescaling region sizes by 2.000000
[Wed May 22 15:04:01 2013] XMMSAS src. selection expression = ellipse(23455.672546, 25348.657990, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 22 15:04:01 2013] Writing source region out to fullrun_mos2_xmm0158961101_pi300-10000_pass1_cl_src3_src.reg
[Wed May 22 15:04:01 2013] Extracting stamp from image fullrun_mos2_xmm0158961101_pi300-10000_cl_sm2.00.img.gz, (195, 217) - (345, 367)
[Wed May 22 15:04:01 2013] XMMSAS bgd. selection expression = annulus(23455.672546, 25348.657990, 4350.000000, 8700.000000, X, Y) && !ellipse(24266.958200, 24883.269800, 1673.995248, 1554.278445, 23.983600, X, Y) && !ellipse(23742.811310, 25732.004395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23346.152588, 24914.454498, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 15:04:01 2013] Writing fullrun_mos2_xmm0158961101_pi300-10000_pass1_cl_src3.gif
[Wed May 22 15:11:39 2013] Mean detx,y = (-14.66, -78.79) 
[Wed May 22 15:11:42 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 15:14:09 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 15:14:09 2013] Setting source spectrum file to fullrun_mos2_xmm0158961101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 22 15:14:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0158961101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 22 15:18:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 15:18:51 2013] rmf not generated due to insufficient counts
[Wed May 22 16:00:24 2013] Updating aperture counts using extracted products
[Wed May 22 16:00:24 2013] Total counts from fullrun_mos2_xmm0158961101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 266226.00
[Wed May 22 16:00:24 2013] Total counts from fullrun_mos2_xmm0158961101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 6423.00
[Wed May 22 16:00:24 2013] Got source and background scale factors 2214870.000000, 56717277.000000
[Wed May 22 16:00:24 2013] User source parameters:
  Position = (270.2, 291.9) = 21 58 55.05 -30 13 6.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 265975.2 +/- 517.0
  Background aperture counts = 250.8
  Rate = 1e+01 +/- 0.03

[Wed May 22 16:00:24 2013] Updating counts from extracted products
[Wed May 22 16:00:24 2013] Set source signif. to 265975.18/15.84 = 16794.06
[Wed May 22 16:00:24 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 16:00:24 2013] Using photon index=1.80, rate=14.9, arf fullrun_mos2_xmm0158961101_pi300-10000_pass1_cl_src3.arf
[Wed May 22 16:00:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 16:00:24 2013] Updating source flux to 1.6e-10
[Wed May 22 16:00:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 16:00:27 2013] xmm0158961101/analysis//spectral/fullrun_mos2_xmm0158961101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete