[Tue Mar 13 17:49:13 2012] Detection parameters:
  Position = (405.7, 314.9) = 21 58 22.46 -30 13 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.8 +/- 13.6
  Background counts = 10.2
  Rate = 0.006 +/- 0.0007

[Tue Mar 13 17:49:13 2012] Off-axis axis estimate = 7.87'
[Tue Mar 13 18:15:44 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 18:15:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 18:15:44 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Tue Mar 13 18:15:44 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Tue Mar 13 18:15:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.36"
[Tue Mar 13 18:44:48 2012] fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Mar 13 18:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_src3.csv
[Tue Mar 13 18:44:48 2012] fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Mar 13 18:44:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_src3.csv
[Tue Mar 13 18:44:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 18:44:49 2012] fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar 13 18:44:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Mar 13 18:44:49 2012] fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar 13 18:44:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Mar 13 18:44:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0158960101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 19:16:30 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.852594 pixels away
[Tue Mar 13 19:16:30 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 19:16:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 19:16:30 2012] Assessing source extent using major
[Tue Mar 13 19:16:30 2012] Source does appear to be extended
[Tue Mar 13 19:16:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 19:16:30 2012] Deleting source due to low Poisson probability 0.9