[Wed May  1 02:28:53 2013] Detection parameters:
  Position = (295.6, 381.6) = 8 46 41.99 18 54 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.9 +/- 13.5
  Background counts = 40.9
  Rate = 0.001 +/- 0.0002

[Wed May  1 02:28:54 2013] Off-axis axis estimate = 6.03'
[Wed May  1 04:31:21 2013] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Wed May  1 04:31:21 2013] Initial guess for spatial extent in simple fitting = 9.45"
[Wed May  1 04:31:21 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.876
[Wed May  1 04:31:21 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 9.45"
[Wed May  1 05:43:38 2013] fullrun_mos1_xmm0158760101_pi300-10000_cl_pass0_src37.ximg exists
[Wed May  1 05:43:38 2013] fullrun_mos1_xmm0158760101_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed May  1 05:43:38 2013] Fit fullrun_mos1_xmm0158760101_pi300-10000_cl_pass0_src37 appears to have run properly
[Wed May  1 05:43:39 2013] fullrun_mos1_xmm0158760101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed May  1 05:43:39 2013] fullrun_mos1_xmm0158760101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed May  1 05:43:39 2013] Fit fullrun_mos1_xmm0158760101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Wed May  1 06:47:55 2013] Spatial fit model total counts = 418.489000, observed total counts = 416.000000
[Wed May  1 06:47:55 2013] Offset between fit and detection position for source 28 = 1.157688 pixels
[Wed May  1 06:47:55 2013] 422.297200 total counts/ 359.487000 bgd. counts: snr = 3.312749
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.157688 pixels
  Position = (295.9, 382.7) = 8 46 41.87 18 54 17.3
  Extent = 10.8 (2.4-7.0)" x 3.3 (-2.3-7.1)", rotation angle = 311 (173-128) degrees
  Source counts = 62.8 +/- 20.5
  Background counts = 359.5
  Rate = 0.0007 +/- 0.0002
[Wed May  1 06:47:55 2013] Vigneting correction estimate = 1.000000
[Wed May  1 06:47:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 06:47:55 2013] Assessing source extent using major axis lower bound
[Wed May  1 06:47:55 2013] Source does appear to be extended
[Wed May  1 06:47:55 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.33
[Wed May  1 08:19:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 08:19:55 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Wed May  1 08:19:55 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Wed May  1 08:19:55 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 7.04"
[Wed May  1 09:24:10 2013] fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_src35.ximg exists
[Wed May  1 09:24:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_src35.csv
[Wed May  1 09:24:10 2013] fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_src35_1.ximg exists
[Wed May  1 09:24:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_src35.csv
[Wed May  1 09:24:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 09:24:11 2013] fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Wed May  1 09:24:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Wed May  1 09:24:11 2013] fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Wed May  1 09:24:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Wed May  1 09:24:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0158760101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 10:38:04 2013] Spatial fit model total counts = 267.388000, observed total counts = 416.000000
[Wed May  1 10:38:04 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 10:38:04 2013] Vigneting correction estimate = 1.000000
[Wed May  1 10:38:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 10:38:04 2013] Assessing source extent using major axis lower bound
[Wed May  1 10:38:04 2013] Source does appear to be extended
[Wed May  1 10:38:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.33
[Wed May  1 16:40:27 2013] XMMSAS src. selection expression = ellipse(25698.487040, 33246.382400, 646.338019, 198.338406, 311.443925, X, Y)
[Wed May  1 16:40:27 2013] Writing source region out to fullrun_mos1_xmm0158760101_pi300-10000_pass1_cl_src28_src.reg
[Wed May  1 16:40:27 2013] Extracting stamp from image fullrun_mos1_xmm0158760101_pi300-10000_cl_sm2.00.img.gz, (259, 346) - (333, 420)
[Wed May  1 16:40:27 2013] XMMSAS bgd. selection expression = annulus(25698.487040, 33246.382400, 1077.230031, 2154.460062, X, Y) && !ellipse(28571.563538, 34563.518616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.185181, 33025.189331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23276.310340, 31630.488200, 721.675221, 317.046409, 71.216015, X, Y)
[Wed May  1 16:40:27 2013] Writing fullrun_mos1_xmm0158760101_pi300-10000_pass1_cl_src28.gif
[Wed May  1 16:48:22 2013] Mean detx,y = (5684.94, -318.58) 
[Wed May  1 16:48:23 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 16:48:39 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 16:48:39 2013] Setting source spectrum file to fullrun_mos1_xmm0158760101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed May  1 16:48:39 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0158760101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed May  1 17:22:01 2013] Not generating rmf since there are only 62 counts
[Wed May  1 17:22:01 2013] rmf not generated due to insufficient counts
[Wed May  1 18:44:13 2013] Updating aperture counts using extracted products
[Wed May  1 18:44:13 2013] Total counts from fullrun_mos1_xmm0158760101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 127.00
[Wed May  1 18:44:13 2013] Total counts from fullrun_mos1_xmm0158760101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 1561.00
[Wed May  1 18:44:13 2013] Got source and background scale factors 400000.000000, 9243615.000000
[Wed May  1 18:44:13 2013] User source parameters:
  Position = (295.9, 382.7) = 8 46 41.87 18 54 17.3
  Extent = 10.8 (2.4-7.0)" x 3.3 (-2.3-7.1)", rotation angle = 311 (173-128) degrees
  Source aperture counts = 59.5 +/- 12.3
  Background aperture counts = 67.5
  Rate = 0.0007 +/- 0.0001

[Wed May  1 18:44:16 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 18:44:16 2013] Using photon index=1.80, rate=0.000704, arf fullrun_mos1_xmm0158760101_pi300-10000_pass1_cl_src28.arf
[Wed May  1 18:44:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 18:44:16 2013] Updating source flux to 1.4e-14
[Wed May  1 18:44:24 2013] Flag p found in src. 28 procflags, skipping spectral fitting
[Wed May  1 18:44:24 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 18:44:29 2013] xmm0158760101/analysis//spectral/fullrun_mos1_xmm0158760101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete