[Fri Jan  6 10:56:21 2012] Detection parameters:
  Position = (193.2, 378.8) = 11 53 1.03 -46 39 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.1 +/- 14.6
  Background counts = 18.6
  Rate = 0.005 +/- 0.0006

[Fri Jan  6 10:56:22 2012] Off-axis axis estimate = 9.60'
[Fri Jan  6 13:59:41 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 13:59:41 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Fri Jan  6 13:59:41 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Fri Jan  6 13:59:41 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.23"
[Fri Jan  6 15:19:36 2012] fullrun_mos2_xmm0158160401_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jan  6 15:19:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158160401_pi300-10000_cl_pass0_src4.csv
[Fri Jan  6 15:19:36 2012] fullrun_mos2_xmm0158160401_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jan  6 15:19:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0158160401_pi300-10000_cl_pass0_src4.csv
[Fri Jan  6 15:19:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0158160401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0158160401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 15:19:36 2012] fullrun_mos2_xmm0158160401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jan  6 15:19:36 2012] fullrun_mos2_xmm0158160401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jan  6 15:19:36 2012] Fit fullrun_mos2_xmm0158160401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jan  6 15:20:09 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.637689 pixels away
[Fri Jan  6 15:20:09 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 15:20:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 15:20:09 2012] Assessing source extent using major
[Fri Jan  6 15:20:09 2012] Source does appear to be extended
[Fri Jan  6 15:20:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 17:56:53 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 17:56:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan  6 17:56:53 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Fri Jan  6 17:56:53 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Fri Jan  6 17:56:53 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.23"
[Fri Jan  6 19:05:48 2012] fullrun_mos2_xmm0158160401_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jan  6 19:05:48 2012] fullrun_mos2_xmm0158160401_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jan  6 19:05:48 2012] Fit fullrun_mos2_xmm0158160401_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Jan  6 19:05:49 2012] fullrun_mos2_xmm0158160401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jan  6 19:05:49 2012] fullrun_mos2_xmm0158160401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jan  6 19:05:49 2012] Fit fullrun_mos2_xmm0158160401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jan  6 19:06:19 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.637689 pixels away
[Fri Jan  6 19:06:19 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 19:06:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 19:06:19 2012] Assessing source extent using major
[Fri Jan  6 19:06:19 2012] Source does appear to be extended
[Fri Jan  6 19:06:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 21:49:10 2012] XMMSAS src. selection expression = ellipse(16762.755219, 32911.203613, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 21:49:10 2012] Writing source region out to fullrun_mos2_xmm0158160401_pi300-10000_pass1_cl_src5_src.reg
[Fri Jan  6 21:49:10 2012] Extracting stamp from image fullrun_mos2_xmm0158160401_pi300-10000_cl_sm2.00.img.gz, (156, 341) - (231, 416)
[Fri Jan  6 21:49:10 2012] XMMSAS bgd. selection expression = annulus(16762.755219, 32911.203613, 1087.500000, 2175.000000, X, Y)
[Fri Jan  6 21:49:10 2012] Writing fullrun_mos2_xmm0158160401_pi300-10000_pass1_cl_src5.gif
[Fri Jan  6 21:50:44 2012] Mean detx,y = (-3518.96, -12173.68) 
[Fri Jan  6 21:50:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 21:51:02 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 21:51:02 2012] Setting source spectrum file to fullrun_mos2_xmm0158160401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jan  6 21:51:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0158160401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jan  6 22:18:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 22:18:28 2012] rmf not generated due to insufficient counts
[Fri Jan  6 22:26:03 2012] Updating aperture counts using extracted products
[Fri Jan  6 22:26:03 2012] Error reading totcts from fullrun_mos2_xmm0158160401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jan  6 22:26:04 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 22:26:04 2012] Using photon index=1.80, rate=0.00507, arf fullrun_mos2_xmm0158160401_pi300-10000_pass1_cl_src5.arf
[Fri Jan  6 22:26:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 22:26:04 2012] Updating source flux to 9.4e-14
[Fri Jan  6 22:28:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting