[Thu May 23 00:39:46 2013] Detection parameters:
  Position = (376.7, 372.9) = 0 54 26.27 -72 37 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.3 +/- 12.0
  Background counts = 15.4
  Rate = 0.007 +/- 0.001

[Thu May 23 00:39:47 2013] Off-axis axis estimate = 7.83'
[Thu May 23 00:40:13 2013] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:40:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 00:40:13 2013] Initial guess for spatial extent in simple fitting = 10.34"
[Thu May 23 00:40:13 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087
[Thu May 23 00:40:13 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.34"
[Thu May 23 00:40:13 2013] fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 23 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_src3.csv
[Thu May 23 00:40:13 2013] fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 23 00:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_src3.csv
[Thu May 23 00:40:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:40:14 2013] fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 23 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 23 00:40:14 2013] fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 23 00:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 23 00:40:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:40:23 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.053133 pixels away
[Thu May 23 00:40:23 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:40:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:40:23 2013] Assessing source extent using major
[Thu May 23 00:40:23 2013] Source does appear to be extended
[Thu May 23 00:40:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:40:46 2013] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:40:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 00:40:46 2013] Initial guess for spatial extent in simple fitting = 10.34"
[Thu May 23 00:40:46 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087
[Thu May 23 00:40:46 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.34"
[Thu May 23 00:40:47 2013] fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 23 00:40:47 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_src3.csv
[Thu May 23 00:40:47 2013] fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 23 00:40:47 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_src3.csv
[Thu May 23 00:40:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:40:47 2013] fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 23 00:40:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 23 00:40:47 2013] fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 23 00:40:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 23 00:40:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:40:55 2013] Source 5 is offset by 8.305816 and -2.893877 pixels which is larger than
2 X fitted extent = 6.541999 x 2.868939, not incorporating fit results
[Thu May 23 00:40:55 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:40:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:40:55 2013] Assessing source extent using major
[Thu May 23 00:40:55 2013] Source does appear to be extended
[Thu May 23 00:40:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:41:17 2013] XMMSAS src. selection expression = ellipse(32726.649872, 32390.183319, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 00:41:17 2013] Not overwriting source region fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_src.reg
[Thu May 23 00:41:17 2013] Extracting stamp from image fullrun_pn_xmm0157960201_pi300-10000_cl_sm2.00.img.gz, (339, 335) - (414, 410)
[Thu May 23 00:41:17 2013] XMMSAS bgd. selection expression = annulus(32726.649872, 32390.183319, 1087.500000, 2175.000000, X, Y)
[Thu May 23 00:41:17 2013] Writing fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5.gif
[Thu May 23 00:41:18 2013] ../../xmm0157960201/products/events/fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0157960201/products/events/fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu May 23 00:41:18 2013] Mean detx,y = (2494.19, -7179.72) 
[Thu May 23 00:41:18 2013] ../../xmm0157960201/products/images/fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_src.img and ../../xmm0157960201/products/images/fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu May 23 00:41:18 2013] ../../xmm0157960201/products/spectra/fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0157960201/products/spectra/fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu May 23 00:41:18 2013] Setting source spectrum file to fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May 23 00:41:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May 23 00:41:18 2013] ../../xmm0157960201/products/lightcurves/fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0157960201/products/lightcurves/fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu May 23 00:53:20 2013] Not generating rmf since there are only 75 counts
[Thu May 23 00:53:20 2013] rmf not generated due to insufficient counts
[Thu May 23 01:06:12 2013] Updating aperture counts using extracted products
[Thu May 23 01:06:13 2013] Total counts from fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 174.00
[Thu May 23 01:06:13 2013] Total counts from fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 790.00
[Thu May 23 01:06:13 2013] Got source and background scale factors 1164461.000000, 9816741.000000
[Thu May 23 01:06:13 2013] User source parameters:
  Position = (376.7, 372.9) = 0 54 26.27 -72 37 27.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 80.3 +/- 14.2
  Background aperture counts = 93.7
  Rate = 0.005 +/- 0.0008

[Thu May 23 01:06:13 2013] Updating counts from extracted products
[Thu May 23 01:06:13 2013] Set source signif. to 80.29/9.68 = 8.29
[Thu May 23 01:06:15 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 01:06:15 2013] Using photon index=1.80, rate=0.00467, arf fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5.arf
[Thu May 23 01:06:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 01:06:15 2013] Updating source flux to 3.2e-14
[Thu May 23 01:06:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 01:06:43 2013] xmm0157960201/analysis//spectral/fullrun_pn_xmm0157960201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete