[Thu May 23 00:39:48 2013] Detection parameters:
  Position = (303.6, 403.1) = 0 55 37.27 -72 35 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.6 +/- 7.6
  Background counts = 4.6
  Rate = 0.003 +/- 0.0008

[Thu May 23 00:39:49 2013] Off-axis axis estimate = 7.60'
[Thu May 23 00:40:14 2013] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:40:14 2013] Initial guess for spatial extent in simple fitting = 10.23"
[Thu May 23 00:40:14 2013] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.923
[Thu May 23 00:40:14 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.23"
[Thu May 23 00:40:15 2013] fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_src6.ximg exists
[Thu May 23 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_src6.csv
[Thu May 23 00:40:15 2013] fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May 23 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_src6.csv
[Thu May 23 00:40:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:40:15 2013] fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May 23 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May 23 00:40:15 2013] fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May 23 00:40:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May 23 00:40:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157960201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:40:28 2013] Spatial fit model total counts = 85.049900, observed total counts = 73.000000
[Thu May 23 00:40:28 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 23 00:40:28 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:40:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:40:28 2013] Assessing source extent using major
[Thu May 23 00:40:28 2013] Source does appear to be extended
[Thu May 23 00:40:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:40:47 2013] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:40:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 00:40:47 2013] Initial guess for spatial extent in simple fitting = 10.23"
[Thu May 23 00:40:47 2013] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.923
[Thu May 23 00:40:47 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.23"
[Thu May 23 00:40:48 2013] fullrun_mos1_xmm0157960201_pi300-10000_cl_pass1_src6.ximg exists
[Thu May 23 00:40:48 2013] fullrun_mos1_xmm0157960201_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu May 23 00:40:48 2013] Fit fullrun_mos1_xmm0157960201_pi300-10000_cl_pass1_src6 appears to have run properly
[Thu May 23 00:40:48 2013] fullrun_mos1_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu May 23 00:40:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May 23 00:40:48 2013] fullrun_mos1_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu May 23 00:40:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May 23 00:40:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157960201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:40:59 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.765206 pixels away
[Thu May 23 00:40:59 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 80.670628 pixels away
[Thu May 23 00:40:59 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:40:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:40:59 2013] Assessing source extent using major
[Thu May 23 00:40:59 2013] Source does appear to be extended
[Thu May 23 00:40:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 01:05:37 2013] XMMSAS src. selection expression = ellipse(26366.673218, 35022.774963, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 01:05:37 2013] Not overwriting source region fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_src.reg
[Thu May 23 01:05:37 2013] Extracting stamp from image fullrun_mos1_xmm0157960201_pi300-10000_cl_sm2.00.img.gz, (266, 366) - (341, 441)
[Thu May 23 01:05:37 2013] XMMSAS bgd. selection expression = annulus(26366.673218, 35022.774963, 1087.500000, 2175.000000, X, Y)
[Thu May 23 01:05:37 2013] Writing fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3.gif
[Thu May 23 01:05:38 2013] ../../xmm0157960201/products/events/fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0157960201/products/events/fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu May 23 01:05:38 2013] Mean detx,y = (7107.73, -4644.29) 
[Thu May 23 01:05:38 2013] ../../xmm0157960201/products/images/fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0157960201/products/images/fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu May 23 01:05:38 2013] ../../xmm0157960201/products/spectra/fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0157960201/products/spectra/fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu May 23 01:05:38 2013] Setting source spectrum file to fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 23 01:05:38 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 23 01:05:38 2013] ../../xmm0157960201/products/lightcurves/fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0157960201/products/lightcurves/fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu May 23 01:05:41 2013] Not generating rmf since there are only 29 counts
[Thu May 23 01:05:41 2013] rmf not generated due to insufficient counts
[Thu May 23 01:05:41 2013] fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Thu May 23 01:06:17 2013] Updating aperture counts using extracted products
[Thu May 23 01:06:17 2013] Total counts from fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 51.00
[Thu May 23 01:06:17 2013] Total counts from fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 210.00
[Thu May 23 01:06:17 2013] Got source and background scale factors 1220936.000000, 10434404.000000
[Thu May 23 01:06:17 2013] User source parameters:
  Position = (303.6, 403.1) = 0 55 37.27 -72 35 16.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 26.4 +/- 8.2
  Background aperture counts = 24.6
  Rate = 0.002 +/- 0.0006

[Thu May 23 01:06:17 2013] Updating counts from extracted products
[Thu May 23 01:06:17 2013] Set source signif. to 26.43/4.96 = 5.33
[Thu May 23 01:06:21 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 01:06:21 2013] Using photon index=1.80, rate=0.00181, arf fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3.arf
[Thu May 23 01:06:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 01:06:21 2013] Updating source flux to 4e-14
[Thu May 23 01:06:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 01:06:38 2013] xmm0157960201/analysis//spectral/fullrun_mos1_xmm0157960201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete