[Sun Jun 10 17:07:48 2012] Detection parameters:
  Position = (268.3, 277.8) = 18 7 5.33 -29 24 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.1 +/- 21.6
  Background counts = 5.6
  Rate = 0.006 +/- 0.001

[Sun Jun 10 17:07:48 2012] Off-axis axis estimate = 2.65'
[Sun Jun 10 17:09:15 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:09:15 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Sun Jun 10 17:09:15 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.960
[Sun Jun 10 17:09:15 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.75"
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src9.csv
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src9.csv
[Sun Jun 10 17:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 10 17:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes