[Sun Jun 10 17:07:48 2012] Detection parameters:
  Position = (183.9, 279.0) = 18 7 33.40 -29 24 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.3 +/- 17.8
  Background counts = 12.4
  Rate = 0.02 +/- 0.002

[Sun Jun 10 17:07:48 2012] Off-axis axis estimate = 8.42'
[Sun Jun 10 17:09:15 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:09:15 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Jun 10 17:09:15 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.037
[Sun Jun 10 17:09:15 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.64"
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src7.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src7.csv
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src7.csv
[Sun Jun 10 17:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jun 10 17:47:04 2012] Fit fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly