[Sun Jun 10 17:07:48 2012] Detection parameters:
  Position = (257.8, 280.1) = 18 7 8.82 -29 24 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.6 +/- 10.7
  Background counts = 5.4
  Rate = 0.003 +/- 0.0006

[Sun Jun 10 17:07:48 2012] Off-axis axis estimate = 3.23'
[Sun Jun 10 17:09:15 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:09:15 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sun Jun 10 17:09:15 2012] source mask rpix=1.8, npix_max = 22, mask sum = 16, frac = 0.725
[Sun Jun 10 17:09:15 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.05"
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src6.csv
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src6.csv
[Sun Jun 10 17:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 10 17:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes