[Sun Jun 10 17:07:48 2012] Detection parameters:
  Position = (288.4, 170.2) = 18 6 58.61 -29 32 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.8 +/- 9.6
  Background counts = 15.1
  Rate = 0.004 +/- 0.001

[Sun Jun 10 17:07:48 2012] Off-axis axis estimate = 9.32'
[Sun Jun 10 17:09:15 2012] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:09:15 2012] Initial guess for spatial extent in simple fitting = 11.09"
[Sun Jun 10 17:09:15 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.968
[Sun Jun 10 17:09:15 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.09"
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src13.csv
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src13.csv
[Sun Jun 10 17:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jun 10 17:47:04 2012] Fit fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly