[Sun Jun 10 17:07:48 2012] Detection parameters:
  Position = (284.8, 280.2) = 18 6 59.81 -29 24 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151282.9 +/- 460.8
  Background counts = 15.9
  Rate = 1e+01 +/- 0.04

[Sun Jun 10 17:07:48 2012] Off-axis axis estimate = 1.65'
[Sun Jun 10 17:09:15 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:09:15 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Jun 10 17:09:15 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sun Jun 10 17:09:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 10 17:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 10 17:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 10 17:47:04 2012] fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 10 17:47:04 2012] Fit fullrun_mos1_xmm0157960101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly