[Thu Jul 26 10:25:01 2012] Detection parameters:
  Position = (321.9, 283.0) = 5 25 0.20 -69 39 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83256.2 +/- 342.7
  Background counts = 110.2
  Rate = 3 +/- 0.01

[Thu Jul 26 10:25:02 2012] Off-axis axis estimate = 2.04'
[Thu Jul 26 19:44:43 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 19:44:43 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Thu Jul 26 19:44:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Thu Jul 26 19:44:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.45"
[Fri Jul 27 01:56:02 2012] fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 01:56:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 01:56:02 2012] fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 01:56:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 01:56:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 01:56:03 2012] fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 01:56:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 27 01:56:03 2012] fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 01:56:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 27 01:56:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157360201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 23:31:13 2012] Spatial fit model total counts = 176325.000000, observed total counts = 197605.000000
[Fri Jul 27 23:31:13 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 23:31:13 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 23:31:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 23:31:13 2012] Assessing source extent using major
[Fri Jul 27 23:31:13 2012] Source does appear to be extended
[Fri Jul 27 23:31:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 23:31:13 2012] Source is confused with source 1
[Sat Jul 28 10:17:58 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 10:17:58 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Sat Jul 28 10:17:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Sat Jul 28 10:17:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.45"
[Mon Jul 30 05:45:01 2012] fullrun_mos1_xmm0157360201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 30 05:45:01 2012] fullrun_mos1_xmm0157360201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 30 05:45:01 2012] Fit fullrun_mos1_xmm0157360201_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Jul 30 05:45:02 2012] fullrun_mos1_xmm0157360201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 30 05:45:02 2012] fullrun_mos1_xmm0157360201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 30 05:45:02 2012] Fit fullrun_mos1_xmm0157360201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 30 16:33:42 2012] Spatial fit model total counts = 192160.000000, observed total counts = 197605.000000
[Mon Jul 30 16:33:42 2012] Offset between fit and detection position for source 2 = 2.461278 pixels
[Mon Jul 30 16:33:42 2012] 189884.000000 total counts/ 25600.000000 bgd. counts: snr = 1026.775000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.461278 pixels
  Position = (319.6, 283.8) = 5 25 2.15 -69 39 4.8
  Extent = 23.2" x 20.0", rotation angle = 27
  Source counts = 164284.0 +/- 435.8
  Background counts = 25600.0
  Rate = 8 +/- 0.02
[Mon Jul 30 16:33:42 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 16:33:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 16:33:42 2012] Assessing source extent using major
[Mon Jul 30 16:33:42 2012] Source does appear to be extended
[Mon Jul 30 16:33:42 2012] Computing asymmetry using major and minor axis, asym = 1.16
[Wed Aug  1 17:52:21 2012] Counts = 164284.000000, rescaling region sizes by 3.000000
[Wed Aug  1 17:52:21 2012] XMMSAS src. selection expression = ellipse(27752.707409, 24641.265948, 4170.511171, 3605.164899, 26.878869, X, Y)
[Wed Aug  1 17:52:21 2012] Writing source region out to fullrun_mos1_xmm0157360201_pi300-10000_pass1_cl_src2_src.reg
[Wed Aug  1 17:52:21 2012] Extracting stamp from image fullrun_mos1_xmm0157360201_pi300-10000_cl_sm2.00.img.gz, (80, 44) - (559, 523)
[Wed Aug  1 17:52:21 2012] XMMSAS bgd. selection expression = annulus(27752.707409, 24641.265948, 20852.555853, 41705.111706, X, Y) && !ellipse(27552.470000, 24707.207600, 6782.376195, 5336.400154, 32.651000, X, Y) && !ellipse(28400.377869, 25438.459045, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27788.767975, 25438.544006, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26561.178009, 25583.986511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26523.524384, 24999.471191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29114.299316, 25197.297424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29203.619812, 25620.378998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26609.474000, 22653.022000, 1228.952035, 1228.952035, 0.000000, X, Y)
[Wed Aug  1 17:52:21 2012] Writing fullrun_mos1_xmm0157360201_pi300-10000_pass1_cl_src2.gif
[Wed Aug  1 17:52:40 2012] Mean detx,y = (72.31, -63.05) 
[Wed Aug  1 17:52:43 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 17:55:43 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 17:55:43 2012] Setting source spectrum file to fullrun_mos1_xmm0157360201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug  1 17:55:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0157360201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Aug  1 21:10:05 2012] Updating aperture counts using extracted products
[Wed Aug  1 21:10:05 2012] Error reading totcts from fullrun_mos1_xmm0157360201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug  1 21:10:05 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 21:10:05 2012] Using photon index=1.80, rate=8.07, arf fullrun_mos1_xmm0157360201_pi300-10000_pass1_cl_src2.arf
[Wed Aug  1 21:10:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 21:10:05 2012] Updating source flux to 6.7e-11
[Wed Aug  1 21:10:06 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Wed Aug  1 21:10:06 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Aug  1 21:11:17 2012] Reading fit data from xmm0157360201/analysis//spectral/fullrun_mos1_xmm0157360201_pi300-10000_pass1_cl_src2_pl.csv
[Wed Aug  1 21:11:17 2012] Spectral fit parameter nH value = 6.12821e+21
[Wed Aug  1 21:11:17 2012] Spectral fit parameter PhoIndex value = 6.42931
[Wed Aug  1 21:11:17 2012] Failed to get F(0.3-8.0) from xmm0157360201/analysis//spectral/fullrun_mos1_xmm0157360201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Aug  1 21:11:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 21:11:17 2012] Using Nh = 6.1e+21, photon index=6.43, rate=8.07, arf fullrun_mos1_xmm0157360201_pi300-10000_pass1_cl_src2.arf
[Wed Aug  1 21:11:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 21:11:17 2012] Updating source flux to 4e-11