[Sun Aug 12 20:03:42 2012] Detection parameters:
  Position = (333.2, 293.8) = 5 24 48.12 -69 38 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 305.4 +/- 36.0
  Background counts = 59.1
  Rate = 0.01 +/- 0.001

[Sun Aug 12 20:03:43 2012] Off-axis axis estimate = 2.54'
[Tue Aug 14 18:15:25 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:15:25 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Tue Aug 14 18:15:25 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.970
[Tue Aug 14 18:15:25 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.70"
[Wed Aug 15 00:38:47 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src11.ximg exists
[Wed Aug 15 00:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src11.csv
[Wed Aug 15 00:38:47 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Aug 15 00:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src11.csv
[Wed Aug 15 00:38:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 00:38:47 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Aug 15 00:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Aug 15 00:38:47 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Aug 15 00:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Aug 15 00:38:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 12:08:08 2012] Warning, spatial fit 11 centroid is now closest to src. 11
[Wed Aug 15 12:08:08 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 12:08:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 12:08:08 2012] Assessing source extent using major
[Wed Aug 15 12:08:08 2012] Source does appear to be extended
[Wed Aug 15 12:08:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 22:59:03 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 22:59:03 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Fri Aug 17 22:59:03 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.970
[Fri Aug 17 22:59:03 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.70"
[Tue Aug 21 00:12:30 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src11.ximg exists
[Tue Aug 21 00:12:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src11.csv
[Tue Aug 21 00:12:30 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Aug 21 00:12:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src11.csv
[Tue Aug 21 00:12:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 00:12:30 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Aug 21 00:12:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Aug 21 00:12:30 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Aug 21 00:12:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Aug 21 00:12:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 09:34:58 2012] Source 6 is offset by -6.156066 and 0.361499 pixels which is larger than
2 X fitted extent = 1.098382 x 3.260088, not incorporating fit results
[Tue Aug 21 09:34:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 09:34:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 09:34:58 2012] Assessing source extent using major
[Tue Aug 21 09:34:58 2012] Source does appear to be extended
[Tue Aug 21 09:34:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 07:25:55 2012] XMMSAS src. selection expression = ellipse(28939.407227, 25508.676605, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 23 07:25:55 2012] Writing source region out to fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src6_src.reg
[Thu Aug 23 07:25:55 2012] Extracting stamp from image fullrun_mos1_xmm0157161001_pi300-10000_cl_sm2.00.img.gz, (296, 256) - (371, 331)
[Thu Aug 23 07:25:55 2012] XMMSAS bgd. selection expression = annulus(28939.407227, 25508.676605, 1087.500000, 2175.000000, X, Y) && !ellipse(27212.560600, 24347.281200, 3541.104102, 3541.104102, 0.000000, X, Y) && !ellipse(27982.133759, 25178.210419, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26522.860000, 24874.106000, 3406.032098, 3406.032098, 0.000000, X, Y) && !ellipse(28270.005310, 24747.009766, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26266.791016, 25283.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27930.535919, 25549.898590, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27571.356000, 24143.694000, 3691.152106, 3688.752106, 0.000000, X, Y) && !ellipse(28050.989288, 23424.667114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.963593, 23108.888550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25669.440000, 25931.064000, 2126.688061, 1404.560040, 15.800986, X, Y) && !ellipse(29002.432312, 24576.750702, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 23 07:25:55 2012] Writing fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src6.gif
[Thu Aug 23 08:30:54 2012] Mean detx,y = (1318.08, -792.66) 
[Thu Aug 23 08:30:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 08:31:01 2012] grppha failed
[Thu Aug 23 08:31:01 2012] Setting source spectrum file to fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src6_src.pi.gz
[Thu Aug 23 08:31:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Aug 23 08:31:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 23 08:31:46 2012] rmf not generated due to insufficient counts
[Thu Aug 23 09:13:47 2012] Updating aperture counts using extracted products
[Thu Aug 23 09:13:47 2012] Error reading totcts from fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src6_src.pi.gz
[Thu Aug 23 09:13:47 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 09:13:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 23 09:13:49 2012] xmm0157161001/analysis//spectral/fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete