[Sun Aug 12 20:03:42 2012] Detection parameters:
  Position = (308.5, 283.0) = 5 25 8.74 -69 38 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63155.7 +/- 302.0
  Background counts = 70.8
  Rate = 2 +/- 0.01

[Sun Aug 12 20:03:43 2012] Off-axis axis estimate = 1.33'
[Tue Aug 14 18:15:25 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 18:15:25 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Tue Aug 14 18:15:25 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Tue Aug 14 18:15:25 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.10"
[Wed Aug 15 00:38:47 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 15 00:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 00:38:47 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 15 00:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 00:38:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 00:38:47 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 15 00:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Aug 15 00:38:47 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 15 00:38:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Aug 15 00:38:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157161001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 12:08:08 2012] Spatial fit model total counts = 235317.000000, observed total counts = 211614.000000
[Wed Aug 15 12:08:08 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 12:08:08 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 12:08:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 12:08:08 2012] Assessing source extent using major
[Wed Aug 15 12:08:08 2012] Source does appear to be extended
[Wed Aug 15 12:08:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 12:08:08 2012] Source is confused with source 1
[Fri Aug 17 22:59:03 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 22:59:03 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Fri Aug 17 22:59:03 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Fri Aug 17 22:59:03 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.10"
[Tue Aug 21 00:12:29 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug 21 00:12:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 00:12:29 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug 21 00:12:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 00:12:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 00:12:30 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug 21 00:12:30 2012] fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug 21 00:12:30 2012] Fit fullrun_mos1_xmm0157161001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Aug 21 09:34:58 2012] Spatial fit model total counts = 191863.000000, observed total counts = 211614.000000
[Tue Aug 21 09:34:58 2012] Offset between fit and detection position for source 4 = 4.613982 pixels
[Tue Aug 21 09:34:58 2012] 124353.500000 total counts/ 25600.000000 bgd. counts: snr = 617.209375
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.613982 pixels
  Position = (305.4, 286.5) = 5 25 11.27 -69 38 31.2
  Extent = 14.2 (14.2-14.2)", rotation angle = 0
  Source counts = 98753.5 +/- 352.6
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Tue Aug 21 09:34:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 09:34:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 09:34:58 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 09:34:58 2012] Source does appear to be extended
[Tue Aug 21 09:34:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 07:25:55 2012] Counts = 98753.500000, rescaling region sizes by 3.000000
[Thu Aug 23 07:25:55 2012] XMMSAS src. selection expression = ellipse(26522.860000, 24874.106000, 2554.524074, 2554.524074, 0.000000, X, Y)
[Thu Aug 23 07:25:55 2012] Writing source region out to fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src4_src.reg
[Thu Aug 23 07:25:55 2012] Extracting stamp from image fullrun_mos1_xmm0157161001_pi300-10000_cl_sm2.00.img.gz, (159, 140) - (452, 433)
[Thu Aug 23 07:25:55 2012] XMMSAS bgd. selection expression = annulus(26522.860000, 24874.106000, 12772.620368, 25545.240735, X, Y) && !ellipse(27212.560600, 24347.281200, 3541.104102, 3541.104102, 0.000000, X, Y) && !ellipse(27982.133759, 25178.210419, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28270.005310, 24747.009766, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26266.791016, 25283.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27930.535919, 25549.898590, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27571.356000, 24143.694000, 3691.152106, 3688.752106, 0.000000, X, Y) && !ellipse(28050.989288, 23424.667114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.963593, 23108.888550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25669.440000, 25931.064000, 2126.688061, 1404.560040, 15.800986, X, Y) && !ellipse(29002.432312, 24576.750702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28939.407227, 25508.676605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22238.195587, 17159.182953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24730.772000, 26540.696000, 1063.344031, 1063.344031, 0.000000, X, Y)
[Thu Aug 23 07:25:55 2012] Writing fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src4.gif
[Thu Aug 23 07:45:48 2012] Mean detx,y = (65.99, -124.32) 
[Thu Aug 23 07:45:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 07:55:33 2012] grppha failed
[Thu Aug 23 07:55:33 2012] Setting source spectrum file to fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Aug 23 07:55:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Aug 23 09:13:47 2012] Updating aperture counts using extracted products
[Thu Aug 23 09:13:47 2012] Error reading totcts from fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Aug 23 09:13:47 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 09:13:48 2012] Flag p found in src. 4 procflags, skipping spectral fitting
[Thu Aug 23 09:13:48 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Thu Aug 23 09:13:48 2012] Source 4 has no response, skipping
[Thu Aug 23 09:13:49 2012] xmm0157161001/analysis//spectral/fullrun_mos1_xmm0157161001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete