[Wed May 15 11:26:59 2013] Detection parameters:
  Position = (278.9, 303.8) = 8 3 42.22 -39 58 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.7 +/- 11.1
  Background counts = 13.1
  Rate = 0.001 +/- 0.0003

[Wed May 15 11:27:00 2013] Off-axis axis estimate = 1.47'
[Wed May 15 12:15:04 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Wed May 15 12:15:04 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Wed May 15 12:15:04 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Wed May 15 12:15:04 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.16"
[Wed May 15 13:42:12 2013] fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_src17.ximg exists
[Wed May 15 13:42:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_src17.csv
[Wed May 15 13:42:12 2013] fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May 15 13:42:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_src17.csv
[Wed May 15 13:42:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 13:42:12 2013] fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May 15 13:42:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 15 13:42:12 2013] fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 15 13:42:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 15 13:42:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0157160901_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 13:42:22 2013] Source 15 is offset by 6.804441 and -6.833280 pixels which is larger than
2 X fitted extent = 0.888046 x 0.888046, not incorporating fit results
[Wed May 15 13:42:22 2013] Vigneting correction estimate = 1.000000
[Wed May 15 13:42:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 13:42:22 2013] Assessing source extent using major
[Wed May 15 13:42:22 2013] Source does appear to be extended
[Wed May 15 13:42:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 13:42:22 2013] Deleting source due to low Poisson probability 0.9