[Wed May 30 07:36:22 2012] Detection parameters:
  Position = (149.3, 265.9) = 5 27 16.24 -69 39 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.5 +/- 18.5
  Background counts = 20.9
  Rate = 0.006 +/- 0.0006

[Wed May 30 07:36:22 2012] Off-axis axis estimate = 11.07'
[Wed May 30 17:36:11 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Wed May 30 17:36:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 17:36:11 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Wed May 30 17:36:11 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.994
[Wed May 30 17:36:11 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.96"
[Thu May 31 06:54:17 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src7.ximg exists
[Thu May 31 06:54:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src7.csv
[Thu May 31 06:54:17 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu May 31 06:54:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src7.csv
[Thu May 31 06:54:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 06:54:17 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu May 31 06:54:17 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu May 31 06:54:17 2012] Fit fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu May 31 06:54:27 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.547970 pixels away
[Thu May 31 06:54:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 06:54:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 06:54:27 2012] Assessing source extent using major
[Thu May 31 06:54:27 2012] Source does appear to be extended
[Thu May 31 06:54:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 21:48:03 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Thu May 31 21:48:03 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Thu May 31 21:48:03 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.994
[Thu May 31 21:48:03 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 11.96"
[Fri Jun  1 02:50:40 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun  1 02:50:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0157160801_pi300-10000_cl_pass1_src7.csv
[Fri Jun  1 02:50:40 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun  1 02:50:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0157160801_pi300-10000_cl_pass1_src7.csv
[Fri Jun  1 02:50:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0157160801_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0157160801_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 02:50:40 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun  1 02:50:40 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun  1 02:50:40 2012] Fit fullrun_mos2_xmm0157160801_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jun  1 02:50:47 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.818812 pixels away
[Fri Jun  1 02:50:47 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 02:50:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 02:50:47 2012] Assessing source extent using major
[Fri Jun  1 02:50:47 2012] Source does appear to be extended
[Fri Jun  1 02:50:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 22:30:09 2012] XMMSAS src. selection expression = ellipse(12939.224960, 23087.112000, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun  5 22:30:09 2012] Writing source region out to fullrun_mos2_xmm0157160801_pi300-10000_pass1_cl_src5_src.reg
[Tue Jun  5 22:30:09 2012] Extracting stamp from image fullrun_mos2_xmm0157160801_pi300-10000_cl_sm2.00.img.gz, (112, 228) - (187, 303)
[Tue Jun  5 22:30:09 2012] XMMSAS bgd. selection expression = annulus(12939.224960, 23087.112000, 1087.500000, 2175.000000, X, Y)
[Tue Jun  5 22:30:09 2012] Writing fullrun_mos2_xmm0157160801_pi300-10000_pass1_cl_src5.gif
[Tue Jun  5 23:11:37 2012] Mean detx,y = (-5919.30, -12831.19) 
[Tue Jun  5 23:11:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 23:11:47 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 23:11:47 2012] Setting source spectrum file to fullrun_mos2_xmm0157160801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Jun  5 23:11:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0157160801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun  8 00:56:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  8 00:56:56 2012] rmf not generated due to insufficient counts
[Fri Jun  8 00:57:40 2012] Updating aperture counts using extracted products
[Fri Jun  8 00:57:40 2012] Error reading totcts from fullrun_mos2_xmm0157160801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  8 00:57:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 00:57:40 2012] Using photon index=1.80, rate=0.00608, arf fullrun_mos2_xmm0157160801_pi300-10000_pass1_cl_src5.arf
[Fri Jun  8 00:57:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 00:57:40 2012] Updating source flux to 1.3e-13
[Fri Jun  8 00:59:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting