[Wed May 30 07:36:22 2012] Detection parameters:
  Position = (232.0, 159.1) = 5 26 7.59 -69 47 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.3 +/- 11.8
  Background counts = 23.4
  Rate = 0.004 +/- 0.0007

[Wed May 30 07:36:22 2012] Off-axis axis estimate = 11.19'
[Wed May 30 17:36:11 2012] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Wed May 30 17:36:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 17:36:11 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Wed May 30 17:36:11 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.845
[Wed May 30 17:36:11 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.02"
[Thu May 31 06:54:17 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 31 06:54:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src11.csv
[Thu May 31 06:54:17 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 31 06:54:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src11.csv
[Thu May 31 06:54:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 06:54:17 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 31 06:54:17 2012] fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 31 06:54:17 2012] Fit fullrun_mos2_xmm0157160801_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 31 06:54:27 2012] Spatial fit model total counts = 289.000000, observed total counts = 289.000000
[Thu May 31 06:54:27 2012] Offset between fit and detection position for source 18 = 0.266717 pixels
[Thu May 31 06:54:27 2012] 291.853800 total counts/ 257.810000 bgd. counts: snr = 2.120255
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.266717 pixels
  Position = (231.7, 159.1) = 5 26 7.82 -69 47 21.3
  Extent = 4.8 (3.5-6.5)", rotation angle = 0
  Source counts = 34.0 +/- 17.1
  Background counts = 257.8
  Rate = 0.001 +/- 0.0005
[Thu May 31 06:54:27 2012] Vigneting correction estimate = 1.000000
[Thu May 31 06:54:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 06:54:27 2012] Assessing source extent using major axis lower bound
[Thu May 31 06:54:27 2012] Source does appear to be extended
[Thu May 31 06:54:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 06:54:27 2012] Deleting source due to low Poisson probability 0.7