[Sun May  5 02:08:24 2013] Detection parameters:
  Position = (333.8, 204.4) = 17 2 37.99 -48 55 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8718.9 +/- 557.5
  Background counts = 1589.5
  Rate = 0.1 +/- 0.008

[Sun May  5 02:08:47 2013] Off-axis axis estimate = 7.28'
[Tue May  7 07:07:58 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Tue May  7 07:07:58 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Tue May  7 07:07:58 2013] source mask rpix=2.3, npix_max = 31, mask sum = 16, frac = 0.505
[Tue May  7 07:07:58 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.07"
[Tue May  7 16:49:59 2013] fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_src10.ximg exists
[Tue May  7 16:49:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_src10.csv
[Tue May  7 16:49:59 2013] fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May  7 16:49:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_src10.csv
[Tue May  7 16:49:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 16:50:01 2013] fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May  7 16:50:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May  7 16:50:01 2013] fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May  7 16:50:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May  7 16:50:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 16:50:54 2013] Warning, spatial fit 10 centroid is now closest to src. 269
[Tue May  7 16:50:55 2013] Vigneting correction estimate = 1.000000
[Tue May  7 16:50:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 16:50:55 2013] Assessing source extent using major
[Tue May  7 16:50:55 2013] Source does appear to be extended
[Tue May  7 16:50:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 16:50:55 2013] Source is confused with source 9
[Wed May  8 14:40:38 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Wed May  8 14:40:38 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Wed May  8 14:40:38 2013] source mask rpix=2.3, npix_max = 31, mask sum = 16, frac = 0.505
[Wed May  8 14:40:38 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.07"
[Thu May  9 02:05:46 2013] fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_src10.ximg exists
[Thu May  9 02:05:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_src10.csv
[Thu May  9 02:05:46 2013] fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May  9 02:05:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_src10.csv
[Thu May  9 02:05:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 02:05:48 2013] fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May  9 02:05:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May  9 02:05:48 2013] fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May  9 02:05:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May  9 02:05:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 02:06:44 2013] Warning, spatial fit 10 centroid is now closest to src. 9
[Thu May  9 02:06:45 2013] Vigneting correction estimate = 1.000000
[Thu May  9 02:06:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 02:06:45 2013] Assessing source extent using major
[Thu May  9 02:06:45 2013] Source does appear to be extended
[Thu May  9 02:06:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 02:13:27 2013] Counts = 8718.911133, rescaling region sizes by 2.000000
[Thu May  9 02:13:27 2013] XMMSAS src. selection expression = ellipse(28992.064423, 17736.276138, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May  9 02:13:27 2013] Writing source region out to fullrun_mos2_xmm0156760101_pi300-10000_pass1_cl_src4_src.reg
[Thu May  9 02:13:27 2013] Extracting stamp from image fullrun_mos2_xmm0156760101_pi300-10000_cl_sm2.00.img.gz, (259, 129) - (409, 279)
[Thu May  9 02:13:27 2013] XMMSAS bgd. selection expression = annulus(28992.064423, 17736.276138, 4350.000000, 8700.000000, X, Y) && !ellipse(23603.706360, 18812.461731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19571.892000, 21556.496400, 2299.304066, 1163.128033, 341.463200, X, Y) && !ellipse(25665.466705, 18791.874634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29591.793060, 15001.242844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28906.341492, 18323.551361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28740.819000, 20912.721329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30279.865143, 21319.044357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28207.062531, 20680.797882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30733.868000, 21398.682000, 2690.432077, 1045.128030, 51.730400, X, Y) && !ellipse(29758.446594, 21162.286118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.548000, 20319.616600, 2144.712062, 2144.712062, 0.000000, X, Y) && !ellipse(19829.798599, 26481.227112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29333.753418, 21084.607925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28481.613800, 19294.719925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19983.297791, 25612.294434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30112.282349, 12909.832458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27223.584000, 20254.300000, 2106.376061, 2106.376061, 0.000000, X, Y) && !ellipse(27297.488000, 19855.818000, 1489.256043, 622.774418, 356.822100, X, Y) && !ellipse(32136.264282, 21750.266251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28881.793091, 19421.712631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31229.170000, 20648.568000, 1136.312033, 547.462416, 16.492300, X, Y) && !ellipse(34064.205841, 26229.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27699.837769, 19239.561691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34194.931519, 25542.586639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20332.304047, 24556.753021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29826.810944, 14467.027054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27013.684200, 19730.684000, 1488.128043, 552.176816, 353.918120, X, Y) && !ellipse(26067.560272, 20217.139496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.166000, 13873.552000, 1216.024035, 1216.024035, 0.000000, X, Y) && !ellipse(30039.165497, 13270.474380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.102000, 19557.866000, 1494.240043, 597.423217, 354.059730, X, Y) && !ellipse(29763.009000, 20139.724000, 1487.248043, 657.465619, 348.970300, X, Y) && !ellipse(19802.498260, 21990.711014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20480.797180, 22171.566299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30511.909393, 20475.414108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33448.634644, 21884.900131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34872.818000, 26760.040000, 1606.320046, 1606.320046, 0.000000, X, Y) && !ellipse(20651.072174, 21420.891281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.739258, 19129.902344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.086639, 18951.367554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20397.556702, 23614.124695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34761.899750, 23970.657959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26393.860718, 20363.171417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32144.750000, 19566.834000, 1583.744046, 1583.744046, 0.000000, X, Y) && !ellipse(25131.482000, 19326.510000, 991.584029, 403.164812, 290.167000, X, Y) && !ellipse(32773.927979, 20920.316040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32492.468000, 20836.993000, 1594.216046, 579.498417, 347.721400, X, Y) && !ellipse(25095.878462, 18558.652000, 1483.776043, 396.575211, 354.744290, X, Y) && !ellipse(30364.215424, 11877.492020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30601.070587, 19692.270737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34053.601654, 21710.978455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25280.468872, 20087.978958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31098.713348, 19526.846481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20787.925659, 22809.135742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21220.715347, 21949.601868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29941.540070, 19605.857498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21178.564102, 21007.471359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34654.386993, 23284.569183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35443.990051, 23535.987183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22034.609268, 19370.952454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24868.810000, 19614.144000, 1483.776043, 1483.776043, 0.000000, X, Y) && !ellipse(32877.965302, 20229.880981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23487.978943, 19674.144852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25803.464508, 18154.842834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35188.714294, 21630.848343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32573.972412, 19091.796036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34225.188232, 20561.602997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.484863, 18507.571442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35956.763824, 22713.798950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35360.969940, 22030.231125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26778.170898, 18334.085190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35963.143860, 23963.943390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19577.018570, 20684.883972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29306.178284, 16499.414810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36489.771576, 25840.613678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19472.638748, 20308.659683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22915.270538, 19190.547195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36209.777496, 24657.912292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35676.857361, 21439.230896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21483.926987, 20323.541122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36618.171448, 25262.512909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33873.155243, 19607.867355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24073.192535, 19013.415588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29131.989777, 17093.096619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29403.280670, 11011.666389, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 02:13:27 2013] Writing fullrun_mos2_xmm0156760101_pi300-10000_pass1_cl_src4.gif
[Thu May  9 02:52:01 2013] Mean detx,y = (96.27, -10194.66) 
[Thu May  9 02:52:05 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 02:53:44 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 02:53:44 2013] Setting source spectrum file to fullrun_mos2_xmm0156760101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May  9 02:53:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0156760101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May  9 09:45:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  9 09:45:36 2013] rmf not generated due to insufficient counts