[Sun May  5 02:07:46 2013] Detection parameters:
  Position = (257.8, 197.7) = 17 3 11.55 -48 56 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2375.5 +/- 782.8
  Background counts = 847.3
  Rate = 0.03 +/- 0.01

[Sun May  5 02:08:22 2013] Off-axis axis estimate = 7.88'
[Sun May  5 02:26:57 2013] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Sun May  5 02:26:57 2013] Initial guess for spatial extent in simple fitting = 10.37"
[Sun May  5 02:26:57 2013] source mask rpix=2.4, npix_max = 33, mask sum = 19, frac = 0.571
[Sun May  5 02:26:57 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 10.37"
[Tue May  7 07:07:55 2013] fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_src71.ximg exists
[Tue May  7 07:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_src71.csv
[Tue May  7 07:07:55 2013] fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_src71_1.ximg exists
[Tue May  7 07:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_src71.csv
[Tue May  7 07:07:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 07:07:57 2013] fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Tue May  7 07:07:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Tue May  7 07:07:57 2013] fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Tue May  7 07:07:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Tue May  7 07:07:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0156760101_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 16:50:33 2013] Warning, spatial fit 71 centroid is now closest to src. 80
[Tue May  7 16:50:34 2013] Vigneting correction estimate = 1.000000
[Tue May  7 16:50:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 16:50:34 2013] Assessing source extent using major
[Tue May  7 16:50:34 2013] Source does appear to be extended
[Tue May  7 16:50:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 16:50:34 2013] Source is confused with source 235
[Tue May  7 16:50:34 2013] Source is confused with source 455
[Tue May  7 16:51:46 2013] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Tue May  7 16:51:46 2013] Initial guess for spatial extent in simple fitting = 10.37"
[Tue May  7 16:51:46 2013] source mask rpix=2.4, npix_max = 33, mask sum = 19, frac = 0.571
[Tue May  7 16:51:46 2013] Giving source the simple spatial ID 71 for pass 1, mean size = 10.37"
[Wed May  8 14:40:35 2013] fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_src71.ximg exists
[Wed May  8 14:40:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_src71.csv
[Wed May  8 14:40:35 2013] fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_src71_1.ximg exists
[Wed May  8 14:40:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_src71.csv
[Wed May  8 14:40:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 14:40:37 2013] fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Wed May  8 14:40:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src71.csv
[Wed May  8 14:40:37 2013] fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Wed May  8 14:40:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src71.csv
[Wed May  8 14:40:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0156760101_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 02:06:22 2013] Warning, spatial fit 71 centroid is now closest to src. 235
[Thu May  9 02:06:22 2013] Vigneting correction estimate = 1.000000
[Thu May  9 02:06:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 02:06:22 2013] Assessing source extent using major
[Thu May  9 02:06:22 2013] Source does appear to be extended
[Thu May  9 02:06:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 02:08:04 2013] Counts = 2375.529053, rescaling region sizes by 2.000000
[Thu May  9 02:08:04 2013] XMMSAS src. selection expression = ellipse(22377.871368, 17151.885605, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May  9 02:08:04 2013] Writing source region out to fullrun_mos1_xmm0156760101_pi300-10000_pass1_cl_src81_src.reg
[Thu May  9 02:08:04 2013] Extracting stamp from image fullrun_mos1_xmm0156760101_pi300-10000_cl_sm2.00.img.gz, (183, 123) - (333, 273)
[Thu May  9 02:08:04 2013] XMMSAS bgd. selection expression = annulus(22377.871368, 17151.885605, 4350.000000, 8700.000000, X, Y) && !ellipse(26287.686200, 27709.598400, 3450.216099, 3450.216099, 0.000000, X, Y) && !ellipse(26560.882400, 27707.242000, 5891.784170, 5572.656160, 333.399800, X, Y) && !ellipse(22829.271000, 26783.069600, 4882.056140, 1176.278434, 344.636300, X, Y) && !ellipse(26544.537220, 27629.550000, 5865.744169, 5505.480158, -0.000000, X, Y) && !ellipse(26589.119200, 27934.452000, 3608.976104, 3608.976104, 0.000000, X, Y) && !ellipse(31702.894600, 28966.590400, 5617.176162, 1236.084036, 345.410500, X, Y) && !ellipse(31198.267660, 28850.930800, 4298.448124, 1145.224833, 345.368200, X, Y) && !ellipse(31073.026800, 28815.155600, 5443.680157, 1179.475234, 345.003400, X, Y) && !ellipse(30018.950000, 28647.947800, 3948.264114, 3948.264114, 0.000000, X, Y) && !ellipse(29817.887800, 28504.238000, 4019.232116, 1048.111230, 344.988500, X, Y) && !ellipse(29443.732697, 28395.752808, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28941.170200, 28439.693600, 3867.408111, 3867.408111, 0.000000, X, Y) && !ellipse(24890.928000, 27363.705600, 3466.008100, 3466.008100, 0.000000, X, Y) && !ellipse(23357.542000, 26900.923800, 7044.144203, 1304.834438, 347.877900, X, Y) && !ellipse(23648.878000, 26936.942000, 3522.072101, 2832.240081, 352.584270, X, Y) && !ellipse(22322.694550, 26768.302155, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(32605.283200, 29255.335560, 3696.144106, 3696.144106, 0.000000, X, Y) && !ellipse(31920.476000, 21751.220000, 1515.296044, 1092.472031, 64.601800, X, Y) && !ellipse(26668.220825, 20515.207687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.990997, 20739.533768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30736.102000, 20856.798000, 1548.192045, 1349.056039, 229.898000, X, Y) && !ellipse(28351.626221, 20228.420715, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29776.901703, 19636.831070, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29461.168274, 26565.662354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29629.823700, 21105.305206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.129700, 20302.239822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23515.816925, 19691.409180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25584.902496, 19716.665146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29922.645800, 14914.915238, 2296.824066, 727.328821, 90.000000, X, Y) && !ellipse(23160.860748, 16145.090530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23441.441589, 14916.115967, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23078.058350, 17209.267426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29879.157800, 15055.425400, 2261.312065, 497.910414, 74.760700, X, Y) && !ellipse(26004.136932, 18386.022873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30827.693268, 11445.972763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30626.992200, 12196.456600, 2006.672058, 575.377617, 73.100800, X, Y) && !ellipse(30289.486969, 13442.107422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17888.851379, 26228.099274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17454.594788, 26483.398926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19457.774567, 26406.803986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18560.143677, 26148.796204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18568.923859, 25384.344238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17346.268265, 25872.227112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16655.097763, 25776.507996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19696.662155, 25445.128479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19111.424667, 25432.288757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17626.272964, 25149.713989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15838.289948, 25464.350891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19523.263519, 24665.842865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30912.667480, 13083.747498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20391.939987, 25084.171936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18738.422256, 25009.475342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17217.176758, 25052.008911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20523.679886, 24473.337311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18132.787506, 24750.315277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16286.119049, 24743.313965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17476.812073, 24489.671051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19150.939468, 24220.679413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17743.005310, 24057.437592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18279.489822, 23697.264282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18768.169205, 23525.717529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17865.395523, 23517.346222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19496.090622, 23364.020935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20700.656174, 23777.754150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20873.292816, 22904.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19544.576767, 22848.313354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19083.683594, 22920.222168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17862.086029, 22839.567688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28598.066040, 22728.260895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28011.724060, 22622.927917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18589.307846, 22660.862976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16930.373856, 22923.235626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20126.520691, 22484.688507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19457.458618, 21957.778030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.023758, 21792.092255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28596.710000, 20593.264000, 4323.096124, 4323.096124, 0.000000, X, Y) && !ellipse(28043.637512, 20661.406876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19083.118073, 21686.430054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.568298, 20262.813965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26502.865601, 20218.844025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30018.740356, 19862.472717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28567.583649, 20046.316238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.770691, 19874.181396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30660.070648, 19719.811356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28744.140442, 19529.229370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.190277, 19617.778580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23381.960968, 19266.423950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22295.398193, 19349.059082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30755.585327, 19101.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25009.679779, 18744.873978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30270.123840, 18377.132507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23162.467041, 18847.030212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22958.122711, 18489.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24457.813354, 18318.539993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30471.266205, 18322.049942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29011.172668, 18566.964447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26013.777344, 18668.711807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23608.764191, 18317.918716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22952.974609, 18120.149567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24917.167938, 18315.060577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29206.758057, 17789.780289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25610.563354, 17699.830551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22857.109467, 17533.957596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26223.532623, 17268.720169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.214783, 16827.182159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26450.213715, 17014.543594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29551.540161, 16389.789978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23218.788177, 16481.691162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26583.867889, 16294.236801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26697.880157, 15246.770660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30545.158325, 14116.531326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16498.861237, 26660.630096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16199.003555, 26303.940186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15920.131226, 24686.159149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16935.861801, 24331.826904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17436.551208, 23866.471954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17025.940308, 23868.287994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19083.938477, 22497.687531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17288.385971, 22494.716553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17930.243286, 21809.178696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17932.226593, 22405.807587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20827.959518, 21622.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20240.884750, 21182.441772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18958.658264, 20926.236755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20877.062958, 21109.235977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18106.039413, 20671.837158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19870.583832, 20661.908676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19506.236816, 20334.870132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18461.805374, 20220.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27277.111969, 19963.635971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23975.827301, 19185.600876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26787.203308, 19525.487106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25107.751251, 19519.141586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31304.008179, 19093.609421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27106.868835, 18752.601440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26716.457397, 18394.732697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27510.905884, 17957.578140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24017.829865, 17959.448608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.184662, 17956.667465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30408.278290, 17682.138763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24832.716766, 17533.133209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23485.793854, 17711.437012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27885.018097, 17693.603180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27478.262299, 17351.387161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28266.572357, 16908.609253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30417.268219, 16741.333115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25561.779846, 16740.000290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24617.104492, 16570.736862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28608.022400, 16403.184601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25406.009277, 16141.053558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27455.129028, 16473.821655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28757.681091, 15698.198654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.106873, 15870.924240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24426.730927, 16044.852554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25453.446686, 15174.859192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29499.761780, 11043.106583, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  9 02:08:04 2013] Writing fullrun_mos1_xmm0156760101_pi300-10000_pass1_cl_src81.gif