[Wed May  8 20:09:14 2013] Detection parameters:
  Position = (411.5, 314.9) = 12 5 8.20 44 28 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 580.8 +/- 32.4
  Background counts = 100.0
  Rate = 0.02 +/- 0.0009

[Wed May  8 20:09:15 2013] Off-axis axis estimate = 8.29'
[Wed May  8 20:09:34 2013] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Wed May  8 20:09:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 20:09:34 2013] Initial guess for spatial extent in simple fitting = 10.57"
[Wed May  8 20:09:34 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.874
[Wed May  8 20:09:34 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.57"
[Wed May  8 20:09:34 2013] fullrun_mos2_xmm0156360101_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  8 20:09:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0156360101_pi300-10000_cl_pass0_src1.csv
[Wed May  8 20:09:34 2013] fullrun_mos2_xmm0156360101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  8 20:09:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0156360101_pi300-10000_cl_pass0_src1.csv
[Wed May  8 20:09:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0156360101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0156360101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 20:09:34 2013] fullrun_mos2_xmm0156360101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  8 20:09:34 2013] fullrun_mos2_xmm0156360101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  8 20:09:34 2013] Fit fullrun_mos2_xmm0156360101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  8 20:09:46 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.219394 pixels away
[Wed May  8 20:09:46 2013] Vigneting correction estimate = 1.000000
[Wed May  8 20:09:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 20:09:46 2013] Assessing source extent using major
[Wed May  8 20:09:46 2013] Source does appear to be extended
[Wed May  8 20:09:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 20:09:57 2013] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Wed May  8 20:09:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  8 20:09:57 2013] Initial guess for spatial extent in simple fitting = 10.57"
[Wed May  8 20:09:57 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.874
[Wed May  8 20:09:57 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.57"
[Wed May  8 20:09:57 2013] fullrun_mos2_xmm0156360101_pi300-10000_cl_pass1_src1.ximg exists
[Wed May  8 20:09:57 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0156360101_pi300-10000_cl_pass1_src1.csv
[Wed May  8 20:09:57 2013] fullrun_mos2_xmm0156360101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May  8 20:09:57 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0156360101_pi300-10000_cl_pass1_src1.csv
[Wed May  8 20:09:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0156360101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0156360101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 20:09:57 2013] fullrun_mos2_xmm0156360101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May  8 20:09:57 2013] fullrun_mos2_xmm0156360101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May  8 20:09:57 2013] Fit fullrun_mos2_xmm0156360101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May  8 20:10:10 2013] Spatial fit model total counts = 557.000000, observed total counts = 557.000000
[Wed May  8 20:10:10 2013] Offset between fit and detection position for source 2 = 0.210620 pixels
[Wed May  8 20:10:10 2013] 559.340000 total counts/ 296.468000 bgd. counts: snr = 15.267060
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.210620 pixels
  Position = (411.3, 314.8) = 12 5 8.29 44 28 40.4
  Extent = 5.5 (4.9-6.2)", rotation angle = 0
  Source counts = 262.9 +/- 23.7
  Background counts = 296.5
  Rate = 0.009 +/- 0.0008
[Wed May  8 20:10:10 2013] Vigneting correction estimate = 1.000000
[Wed May  8 20:10:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 20:10:10 2013] Assessing source extent using major axis lower bound
[Wed May  8 20:10:10 2013] Source does appear to be extended
[Wed May  8 20:10:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 08:33:12 2013] XMMSAS src. selection expression = ellipse(35736.819400, 27343.038200, 327.540609, 327.540609, 0.000000, X, Y)
[Thu May  9 08:33:12 2013] Writing source region out to fullrun_mos2_xmm0156360101_pi300-10000_pass1_cl_src2_src.reg
[Thu May  9 08:33:12 2013] Extracting stamp from image fullrun_mos2_xmm0156360101_pi300-10000_cl_sm2.00.img.gz, (393, 296) - (430, 334)
[Thu May  9 08:33:12 2013] XMMSAS bgd. selection expression = annulus(35736.819400, 27343.038200, 545.901016, 1091.802031, X, Y)
[Thu May  9 08:33:12 2013] Writing fullrun_mos2_xmm0156360101_pi300-10000_pass1_cl_src2.gif
[Thu May  9 08:33:14 2013] Mean detx,y = (-8362.68, -4333.11) 
[Thu May  9 08:33:15 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 08:33:21 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 08:33:21 2013] Setting source spectrum file to fullrun_mos2_xmm0156360101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May  9 08:33:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0156360101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May  9 08:50:35 2013] Updating aperture counts using extracted products
[Thu May  9 08:50:35 2013] Total counts from fullrun_mos2_xmm0156360101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 294.00
[Thu May  9 08:50:35 2013] Total counts from fullrun_mos2_xmm0156360101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 220.00
[Thu May  9 08:50:35 2013] Got source and background scale factors 337600.000000, 2801600.000000
[Thu May  9 08:50:35 2013] User source parameters:
  Position = (411.3, 314.8) = 12 5 8.29 44 28 40.4
  Extent = 5.5 (4.9-6.2)", rotation angle = 0
  Source aperture counts = 267.5 +/- 18.2
  Background aperture counts = 26.5
  Rate = 0.009 +/- 0.0006

[Thu May  9 08:50:38 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 08:50:38 2013] Using photon index=1.80, rate=0.00861, arf fullrun_mos2_xmm0156360101_pi300-10000_pass1_cl_src2.arf
[Thu May  9 08:50:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 08:50:38 2013] Updating source flux to 1.6e-13
[Thu May  9 08:50:49 2013] xmm0156360101/analysis//spectral/fullrun_mos2_xmm0156360101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete