[Mon May 13 00:44:49 2013] Detection parameters:
  Position = (222.2, 276.0) = 12 10 34.96 -52 29 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.0 +/- 20.1
  Background counts = 172.9
  Rate = 0.001 +/- 0.0003

[Mon May 13 00:44:51 2013] Off-axis axis estimate = 5.76'
[Mon May 13 00:45:33 2013] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:45:33 2013] Initial guess for spatial extent in simple fitting = 9.31"
[Mon May 13 00:45:33 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Mon May 13 00:45:33 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 9.31"
[Mon May 13 00:45:34 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src34.ximg exists
[Mon May 13 00:45:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src34.csv
[Mon May 13 00:45:34 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src34_1.ximg exists
[Mon May 13 00:45:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src34.csv
[Mon May 13 00:45:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:45:41 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Mon May 13 00:45:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Mon May 13 00:45:41 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Mon May 13 00:45:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Mon May 13 00:45:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:46:07 2013] Warning, spatial fit 34 centroid is now closest to src. 51
[Mon May 13 00:46:07 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:46:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:46:07 2013] Assessing source extent using major
[Mon May 13 00:46:07 2013] Source does appear to be extended
[Mon May 13 00:46:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 00:46:45 2013] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:46:45 2013] Initial guess for spatial extent in simple fitting = 9.31"
[Mon May 13 00:46:45 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Mon May 13 00:46:45 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 9.31"
[Mon May 13 00:46:46 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src32.ximg exists
[Mon May 13 00:46:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src32.csv
[Mon May 13 00:46:46 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src32_1.ximg exists
[Mon May 13 00:46:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src32.csv
[Mon May 13 00:46:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:46:47 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Mon May 13 00:46:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_tfrozen_src32.csv
[Mon May 13 00:46:47 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Mon May 13 00:46:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_tfrozen_src32.csv
[Mon May 13 00:46:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:47:12 2013] Spatial fit model total counts = -45.282200, observed total counts = 739.000000
[Mon May 13 00:47:12 2013] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 00:47:12 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:47:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:47:12 2013] Assessing source extent using major
[Mon May 13 00:47:12 2013] Source does appear to be extended
[Mon May 13 00:47:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 00:49:10 2013] XMMSAS src. selection expression = ellipse(19283.287369, 23962.013184, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 00:49:10 2013] Not overwriting source region fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_src.reg
[Mon May 13 00:49:10 2013] Extracting stamp from image fullrun_mos1_xmm0155960501_pi300-10000_cl_sm2.00.img.gz, (185, 238) - (260, 313)
[Mon May 13 00:49:10 2013] XMMSAS bgd. selection expression = annulus(19283.287369, 23962.013184, 1087.500000, 2175.000000, X, Y) && !ellipse(20624.052000, 26712.090000, 1184.024034, 1184.024034, 0.000000, X, Y) && !ellipse(20696.389542, 25553.326233, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 00:49:10 2013] Writing fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53.gif
[Mon May 13 00:49:20 2013] ../../xmm0155960501/products/events/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_src.evt and ../../xmm0155960501/products/events/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_bgd.evt exist, delete to re-create
[Mon May 13 00:49:20 2013] Mean detx,y = (1990.10, -7488.20) 
[Mon May 13 00:49:20 2013] ../../xmm0155960501/products/images/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_src.img and ../../xmm0155960501/products/images/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_bgd.img exist, delete to re-create
[Mon May 13 00:49:20 2013] ../../xmm0155960501/products/spectra/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_src_b10.pi.gz and ../../xmm0155960501/products/spectra/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_bgd.pi exist, delete to re-create
[Mon May 13 00:49:20 2013] Setting source spectrum file to fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon May 13 00:49:20 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Mon May 13 00:49:20 2013] ../../xmm0155960501/products/lightcurves/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_src.lc and ../../xmm0155960501/products/lightcurves/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_bgd.lc exist, delete to re-create
[Mon May 13 00:49:52 2013] Not generating rmf since there are only 99 counts
[Mon May 13 00:49:52 2013] rmf not generated due to insufficient counts
[Mon May 13 00:49:52 2013] fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53.arf exists, delete to re-create
[Mon May 13 02:30:15 2013] Updating aperture counts using extracted products
[Mon May 13 02:30:15 2013] Total counts from fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 541.00
[Mon May 13 02:30:15 2013] Total counts from fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_bgd.pi.gz = 3871.00
[Mon May 13 02:30:15 2013] Got source and background scale factors 1142272.000000, 8703306.000000
[Mon May 13 02:30:15 2013] User source parameters:
  Position = (222.2, 276.0) = 12 10 34.96 -52 29 43.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 32.9 +/- 24.3
  Background aperture counts = 508.1
  Rate = 0.0003 +/- 0.0002

[Mon May 13 02:30:15 2013] Updating counts from extracted products
[Mon May 13 02:30:15 2013] Set source signif. to 32.95/22.54 = 1.46
[Mon May 13 02:30:22 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 02:30:22 2013] Using photon index=1.80, rate=0.000299, arf fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53.arf
[Mon May 13 02:30:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 02:30:22 2013] Updating source flux to 5e-15
[Mon May 13 02:30:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 02:30:47 2013] xmm0155960501/analysis//spectral/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete