[Mon May 13 00:44:47 2013] Detection parameters: Position = (337.8, 492.1) = 12 9 40.01 -52 14 5.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 148.4 +/- 22.2 Background counts = 105.5 Rate = 0.001 +/- 0.0002 [Mon May 13 00:44:51 2013] Off-axis axis estimate = 14.33' [Mon May 13 00:45:33 2013] Using EEF radius (= 13.59 ")to estimate initial spatial extent for simple fitting [Mon May 13 00:45:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 13 00:45:33 2013] Initial guess for spatial extent in simple fitting = 13.59" [Mon May 13 00:45:33 2013] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.065 [Mon May 13 00:45:33 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 13.59" [Mon May 13 00:45:34 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src39.ximg exists [Mon May 13 00:45:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src39.csv [Mon May 13 00:45:34 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src39_1.ximg exists [Mon May 13 00:45:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src39.csv [Mon May 13 00:45:34 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src39_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 13 00:45:41 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_tfrozen_src39.ximg exists [Mon May 13 00:45:41 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists [Mon May 13 00:45:41 2013] Fit fullrun_mos1_xmm0155960501_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly [Mon May 13 00:46:07 2013] Spatial fit model total counts = 693.997000, observed total counts = 694.000000 [Mon May 13 00:46:07 2013] Offset between fit and detection position for source 22 = 0.527427 pixels [Mon May 13 00:46:07 2013] 700.496600 total counts/ 623.260000 bgd. counts: snr = 3.093774 Spatial fit parameters: Offset between fit and detection position for source 22 = 0.527427 pixels Position = (337.3, 492.0) = 12 9 40.26 -52 14 4.9 Extent = 7.2 (4.2-10.2)", rotation angle = 0 Source counts = 77.2 +/- 26.5 Background counts = 623.3 Rate = 0.0007 +/- 0.0002 [Mon May 13 00:46:07 2013] Vigneting correction estimate = 1.000000 [Mon May 13 00:46:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 13 00:46:07 2013] Assessing source extent using major axis lower bound [Mon May 13 00:46:07 2013] Source does appear to be extended [Mon May 13 00:46:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 13 00:46:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 13 00:46:45 2013] Initial guess for spatial extent in simple fitting = 7.25" [Mon May 13 00:46:45 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853 [Mon May 13 00:46:45 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 7.25" [Mon May 13 00:46:46 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src37.ximg exists [Mon May 13 00:46:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src37.csv [Mon May 13 00:46:46 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src37_1.ximg exists [Mon May 13 00:46:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src37.csv [Mon May 13 00:46:46 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src37_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 13 00:46:47 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_tfrozen_src37.ximg exists [Mon May 13 00:46:47 2013] fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists [Mon May 13 00:46:47 2013] Fit fullrun_mos1_xmm0155960501_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly [Mon May 13 00:47:12 2013] Spatial fit model total counts = 499.996000, observed total counts = 500.000000 [Mon May 13 00:47:12 2013] Offset between fit and detection position for source 22 = 0.099354 pixels [Mon May 13 00:47:12 2013] 504.411600 total counts/ 419.006000 bgd. counts: snr = 4.172307 Spatial fit parameters: Offset between fit and detection position for source 22 = 0.099354 pixels Position = (337.2, 492.1) = 12 9 40.30 -52 14 4.7 Extent = 7.8 (4.4-11.2)", rotation angle = 0 Source counts = 85.4 +/- 22.5 Background counts = 419.0 Rate = 0.0008 +/- 0.0002 [Mon May 13 00:47:12 2013] Vigneting correction estimate = 1.000000 [Mon May 13 00:47:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 13 00:47:12 2013] Assessing source extent using major axis lower bound [Mon May 13 00:47:12 2013] Source does appear to be extended [Mon May 13 00:47:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 13 00:49:10 2013] XMMSAS src. selection expression = ellipse(29287.128800, 42760.995000, 470.095814, 470.095814, 0.000000, X, Y) [Mon May 13 00:49:10 2013] Not overwriting source region fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_src.reg [Mon May 13 00:49:10 2013] Extracting stamp from image fullrun_mos1_xmm0155960501_pi300-10000_cl_sm2.00.img.gz, (310, 465) - (364, 519) [Mon May 13 00:49:10 2013] XMMSAS bgd. selection expression = annulus(29287.128800, 42760.995000, 783.493023, 1566.986045, X, Y) [Mon May 13 00:49:10 2013] Writing fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22.gif [Mon May 13 00:49:21 2013] ../../xmm0155960501/products/events/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0155960501/products/events/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create [Mon May 13 00:49:21 2013] Mean detx,y = (7957.33, 13032.28) [Mon May 13 00:49:21 2013] ../../xmm0155960501/products/images/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_src.img and ../../xmm0155960501/products/images/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create [Mon May 13 00:49:21 2013] ../../xmm0155960501/products/spectra/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0155960501/products/spectra/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create [Mon May 13 00:49:21 2013] Setting source spectrum file to fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_src_b10.pi.gz [Mon May 13 00:49:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_bgd.pi.gz [Mon May 13 00:49:21 2013] ../../xmm0155960501/products/lightcurves/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0155960501/products/lightcurves/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create [Mon May 13 00:49:52 2013] Not generating rmf since there are only 85 counts [Mon May 13 00:49:52 2013] rmf not generated due to insufficient counts [Mon May 13 00:49:52 2013] fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22.arf exists, delete to re-create [Mon May 13 02:30:16 2013] Updating aperture counts using extracted products [Mon May 13 02:30:16 2013] Total counts from fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 234.00 [Mon May 13 02:30:16 2013] Total counts from fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_bgd.pi.gz = 1212.00 [Mon May 13 02:30:16 2013] Got source and background scale factors 695180.000000, 5764680.000000 [Mon May 13 02:30:16 2013] User source parameters: Position = (337.2, 492.1) = 12 9 40.30 -52 14 4.7 Extent = 7.8 (4.4-11.2)", rotation angle = 0 Source aperture counts = 87.8 +/- 16.3 Background aperture counts = 146.2 Rate = 0.0008 +/- 0.0001 [Mon May 13 02:30:22 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 13 02:30:22 2013] Using photon index=1.80, rate=0.000775, arf fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22.arf [Mon May 13 02:30:22 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 13 02:30:22 2013] Updating source flux to 2e-14 [Mon May 13 02:30:35 2013] Source 22 has fewer than 100.000000 counts, skipping spectral fitting [Mon May 13 02:30:47 2013] xmm0155960501/analysis//spectral/fullrun_mos1_xmm0155960501_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete