[Sun May  5 22:45:00 2013] Detection parameters:
  Position = (285.0, 313.4) = 17 19 59.66 -31 42 21.5
  Extent = 87.0" x 87.0", rotation angle = 0 degrees
  Source counts = 4940.7 +/- 134.6
  Background counts = 147482.9
  Rate = 0.7 +/- 0.02

[Sun May  5 22:45:00 2013] Off-axis axis estimate = 1.46'
[Sun May  5 22:48:09 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Sun May  5 22:48:09 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Sun May  5 22:48:09 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.086
[Sun May  5 22:48:09 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.16"
[Sun May  5 22:55:02 2013] fullrun_pn_xmm0154750501_pi300-10000_cl_pass0_src3.ximg exists
[Sun May  5 22:55:02 2013] Warning: total counts is not > 0
[Sun May  5 22:55:02 2013] fullrun_pn_xmm0154750501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May  5 22:55:02 2013] Warning: total counts is not > 0
[Sun May  5 22:55:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0154750501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0154750501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 22:55:02 2013] fullrun_pn_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May  5 22:55:02 2013] Warning: total counts is not > 0
[Sun May  5 22:55:02 2013] fullrun_pn_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May  5 22:55:02 2013] Warning: total counts is not > 0
[Sun May  5 22:55:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes