[Sun May  5 22:45:06 2013] Detection parameters:
  Position = (287.6, 238.1) = 17 19 58.75 -31 47 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.2 +/- 28.9
  Background counts = 284.2
  Rate = 0.08 +/- 0.01

[Sun May  5 22:45:08 2013] Off-axis axis estimate = 4.45'
[Mon May  6 01:59:57 2013] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Mon May  6 01:59:57 2013] Initial guess for spatial extent in simple fitting = 8.65"
[Mon May  6 01:59:57 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.009
[Mon May  6 01:59:57 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.65"
[Mon May  6 11:23:51 2013] fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_src17.ximg exists
[Mon May  6 11:23:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_src17.csv
[Mon May  6 11:23:51 2013] fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon May  6 11:23:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_src17.csv
[Mon May  6 11:23:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 11:23:52 2013] fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon May  6 11:23:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon May  6 11:23:52 2013] fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon May  6 11:23:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon May  6 11:23:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes