[Sun May  5 22:45:01 2013] Detection parameters:
  Position = (283.4, 360.9) = 17 20 0.19 -31 39 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.6 +/- 27.7
  Background counts = 251.0
  Rate = 0.02 +/- 0.002

[Sun May  5 22:45:05 2013] Off-axis axis estimate = 4.66'
[Sun May  5 22:55:02 2013] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Sun May  5 22:55:02 2013] Initial guess for spatial extent in simple fitting = 8.76"
[Sun May  5 22:55:02 2013] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.791
[Sun May  5 22:55:02 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.76"
[Mon May  6 01:59:54 2013] fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src20.ximg exists
[Mon May  6 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src20.csv
[Mon May  6 01:59:54 2013] fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon May  6 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src20.csv
[Mon May  6 01:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:59:56 2013] fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon May  6 01:59:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May  6 01:59:56 2013] fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon May  6 01:59:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src20.csv
[Mon May  6 01:59:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes