[Sun May  5 22:45:02 2013] Detection parameters:
  Position = (260.3, 363.0) = 17 20 8.05 -31 38 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.3 +/- 23.9
  Background counts = 237.4
  Rate = 0.02 +/- 0.002

[Sun May  5 22:45:05 2013] Off-axis axis estimate = 5.44'
[Sun May  5 22:55:02 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sun May  5 22:55:02 2013] Initial guess for spatial extent in simple fitting = 9.15"
[Sun May  5 22:55:02 2013] source mask rpix=2.1, npix_max = 27, mask sum = 18, frac = 0.664
[Sun May  5 22:55:02 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.15"
[Mon May  6 01:59:54 2013] fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src13.ximg exists
[Mon May  6 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src13.csv
[Mon May  6 01:59:54 2013] fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon May  6 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src13.csv
[Mon May  6 01:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 01:59:56 2013] fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon May  6 01:59:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon May  6 01:59:56 2013] fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May  6 01:59:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src13.csv
[Mon May  6 01:59:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0154750501_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes