[Mon Dec 19 17:04:05 2011] Detection parameters:
  Position = (153.4, 183.0) = 16 32 49.82 -48 55 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 451.6 +/- 26.5
  Background counts = 9.5
  Rate = 0.02 +/- 0.001

[Mon Dec 19 17:04:06 2011] Off-axis axis estimate = 13.44'
[Mon Dec 19 18:39:39 2011] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 18:39:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 18:39:39 2011] Initial guess for spatial extent in simple fitting = 13.15"
[Mon Dec 19 18:39:39 2011] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.128
[Mon Dec 19 18:39:39 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 13.15"
[Mon Dec 19 18:58:30 2011] fullrun_mos2_xmm0154750401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Dec 19 18:58:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154750401_pi300-10000_cl_pass0_src3.csv
[Mon Dec 19 18:58:30 2011] fullrun_mos2_xmm0154750401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Dec 19 18:58:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154750401_pi300-10000_cl_pass0_src3.csv
[Mon Dec 19 18:58:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0154750401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0154750401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 18:58:30 2011] fullrun_mos2_xmm0154750401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Dec 19 18:58:30 2011] fullrun_mos2_xmm0154750401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Dec 19 18:58:30 2011] Fit fullrun_mos2_xmm0154750401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Dec 19 18:58:42 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.688257 pixels away
[Mon Dec 19 18:58:42 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 18:58:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 18:58:42 2011] Assessing source extent using major
[Mon Dec 19 18:58:42 2011] Source does appear to be extended
[Mon Dec 19 18:58:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 20:04:01 2011] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 20:04:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 20:04:01 2011] Initial guess for spatial extent in simple fitting = 13.15"
[Mon Dec 19 20:04:01 2011] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.128
[Mon Dec 19 20:04:01 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 13.15"
[Mon Dec 19 20:21:05 2011] fullrun_mos2_xmm0154750401_pi300-10000_cl_pass1_src3.ximg exists
[Mon Dec 19 20:21:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154750401_pi300-10000_cl_pass1_src3.csv
[Mon Dec 19 20:21:05 2011] fullrun_mos2_xmm0154750401_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Dec 19 20:21:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154750401_pi300-10000_cl_pass1_src3.csv
[Mon Dec 19 20:21:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0154750401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0154750401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 20:21:05 2011] fullrun_mos2_xmm0154750401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Dec 19 20:21:05 2011] fullrun_mos2_xmm0154750401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Dec 19 20:21:05 2011] Fit fullrun_mos2_xmm0154750401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Dec 19 20:21:14 2011] Spatial fit model total counts = 518.924000, observed total counts = 519.000000
[Mon Dec 19 20:21:14 2011] Offset between fit and detection position for source 1 = 0.222763 pixels
[Mon Dec 19 20:21:14 2011] 524.340000 total counts/ 231.376000 bgd. counts: snr = 19.259948
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.222763 pixels
  Position = (153.6, 183.1) = 16 32 49.73 -48 55 25.6
  Extent = 5.9 (5.4-6.5)", rotation angle = 0
  Source counts = 293.0 +/- 22.9
  Background counts = 231.4
  Rate = 0.01 +/- 0.0009
[Mon Dec 19 20:21:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 20:21:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 20:21:14 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 20:21:14 2011] Source does appear to be extended
[Mon Dec 19 20:21:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 21:14:50 2011] XMMSAS src. selection expression = ellipse(13317.559140, 15879.195200, 354.068827, 354.068827, 0.000000, X, Y)
[Mon Dec 19 21:14:50 2011] Writing source region out to fullrun_mos2_xmm0154750401_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 19 21:14:50 2011] Extracting stamp from image fullrun_mos2_xmm0154750401_pi300-10000_cl_sm2.00.img.gz, (133, 163) - (174, 203)
[Mon Dec 19 21:14:50 2011] XMMSAS bgd. selection expression = annulus(13317.559140, 15879.195200, 590.114712, 1180.229425, X, Y)
[Mon Dec 19 21:14:50 2011] Writing fullrun_mos2_xmm0154750401_pi300-10000_pass1_cl_src1.gif
[Mon Dec 19 21:15:31 2011] Mean detx,y = (-11183.12, 8680.20) 
[Mon Dec 19 21:15:32 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 21:15:39 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 21:15:39 2011] Setting source spectrum file to fullrun_mos2_xmm0154750401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 21:15:39 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0154750401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 19 21:31:25 2011] Updating aperture counts using extracted products
[Mon Dec 19 21:31:25 2011] Error reading totcts from fullrun_mos2_xmm0154750401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 21:31:25 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 21:31:25 2011] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0154750401_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 21:31:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 21:31:25 2011] Updating source flux to 3.6e-13