[Mon Dec 19 17:03:31 2011] Detection parameters:
  Position = (457.9, 273.5) = 16 30 35.61 -48 48 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.7 +/- 7.2
  Background counts = 8.4
  Rate = 0.0009 +/- 0.0003

[Mon Dec 19 17:03:32 2011] Off-axis axis estimate = 11.70'
[Mon Dec 19 17:54:47 2011] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 17:54:47 2011] Initial guess for spatial extent in simple fitting = 12.28"
[Mon Dec 19 17:54:47 2011] source mask rpix=2.8, npix_max = 44, mask sum = 41, frac = 0.929
[Mon Dec 19 17:54:47 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 12.28"
[Mon Dec 19 18:39:38 2011] fullrun_mos1_xmm0154750401_pi300-10000_cl_pass0_src24.ximg exists
[Mon Dec 19 18:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750401_pi300-10000_cl_pass0_src24.csv
[Mon Dec 19 18:39:38 2011] fullrun_mos1_xmm0154750401_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon Dec 19 18:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750401_pi300-10000_cl_pass0_src24.csv
[Mon Dec 19 18:39:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0154750401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0154750401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 18:39:39 2011] fullrun_mos1_xmm0154750401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon Dec 19 18:39:39 2011] fullrun_mos1_xmm0154750401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Dec 19 18:39:39 2011] Fit fullrun_mos1_xmm0154750401_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Mon Dec 19 18:58:40 2011] Warning, spatial fit 12 centroid is now closest to src. 10
[Mon Dec 19 18:58:40 2011] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.474839 pixels away
[Mon Dec 19 18:58:40 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 18:58:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 18:58:40 2011] Assessing source extent using major
[Mon Dec 19 18:58:40 2011] Source does appear to be extended
[Mon Dec 19 18:58:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 18:58:40 2011] Source is confused with source 3
[Mon Dec 19 19:28:53 2011] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 19:28:53 2011] Initial guess for spatial extent in simple fitting = 12.28"
[Mon Dec 19 19:28:53 2011] source mask rpix=2.8, npix_max = 44, mask sum = 41, frac = 0.929
[Mon Dec 19 19:28:53 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 12.28"
[Mon Dec 19 20:04:01 2011] fullrun_mos1_xmm0154750401_pi300-10000_cl_pass1_src23.ximg exists
[Mon Dec 19 20:04:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750401_pi300-10000_cl_pass1_src23.csv
[Mon Dec 19 20:04:01 2011] fullrun_mos1_xmm0154750401_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Dec 19 20:04:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0154750401_pi300-10000_cl_pass1_src23.csv
[Mon Dec 19 20:04:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0154750401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0154750401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 20:04:01 2011] fullrun_mos1_xmm0154750401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Dec 19 20:04:01 2011] fullrun_mos1_xmm0154750401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Dec 19 20:04:01 2011] Fit fullrun_mos1_xmm0154750401_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Dec 19 20:21:11 2011] Warning, spatial fit 11 centroid is now closest to src. 10
[Mon Dec 19 20:21:11 2011] Source 11 is offset by -5.656989 and -0.661183 pixels which is larger than
2 X fitted extent = 3.872377 x 3.872377, not incorporating fit results
[Mon Dec 19 20:21:11 2011] Warning, spatial fit 14 centroid is now closest to src. 12
[Mon Dec 19 20:21:11 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 71.072220 pixels away
[Mon Dec 19 20:21:11 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.007531 pixels away
[Mon Dec 19 20:21:11 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 20:21:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 20:21:11 2011] Assessing source extent using major
[Mon Dec 19 20:21:11 2011] Source does appear to be extended
[Mon Dec 19 20:21:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 21:03:19 2011] XMMSAS src. selection expression = ellipse(39785.233765, 23744.969849, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 21:03:19 2011] Writing source region out to fullrun_mos1_xmm0154750401_pi300-10000_pass1_cl_src11_src.reg
[Mon Dec 19 21:03:19 2011] Extracting stamp from image fullrun_mos1_xmm0154750401_pi300-10000_cl_sm2.00.img.gz, (420, 236) - (495, 311)
[Mon Dec 19 21:03:19 2011] XMMSAS bgd. selection expression = annulus(39785.233765, 23744.969849, 1087.500000, 2175.000000, X, Y) && !ellipse(40336.745480, 23852.768800, 337.296810, 337.296810, 0.000000, X, Y) && !ellipse(37374.639740, 22518.218872, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 21:03:19 2011] Writing fullrun_mos1_xmm0154750401_pi300-10000_pass1_cl_src11.gif
[Mon Dec 19 21:09:28 2011] Mean detx,y = (532.15, -15482.28) 
[Mon Dec 19 21:09:29 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 21:09:49 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 21:09:49 2011] Setting source spectrum file to fullrun_mos1_xmm0154750401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Dec 19 21:09:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0154750401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon Dec 19 21:14:39 2011] Not generating rmf since there are only 24 counts
[Mon Dec 19 21:14:39 2011] rmf not generated due to insufficient counts
[Mon Dec 19 21:31:24 2011] Updating aperture counts using extracted products
[Mon Dec 19 21:31:24 2011] Error reading totcts from fullrun_mos1_xmm0154750401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Dec 19 21:31:25 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 21:31:25 2011] Using photon index=1.80, rate=0.000937, arf fullrun_mos1_xmm0154750401_pi300-10000_pass1_cl_src11.arf
[Mon Dec 19 21:31:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 21:31:25 2011] Updating source flux to 3.5e-14
[Mon Dec 19 21:31:26 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting